Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
On Mon, 5 Dec 2016 10:28:21 +0100 Maxime Ripard wrote: > On Thu, Dec 01, 2016 at 11:24:14AM +0100, Emmanuel Vadot wrote: > > > > > > If num-cs isn't present nothing prevent to start a transfer > > > > > > with a non-valid CS pin, resulting in an error. num-cs are > > > > > > default property especially made for this and a SPI driver > > > > > > should try to get the property at probe/attach time. > > > > > > > > > > Yes, but as far as I know, our driver doesn't. I'm all in for > > > > > having support for that in our driver, but without it, that > > > > > patch is kind of useless. > > > > > > > > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD > > > > uses it. So it is not useless for downstream user of DTS. > > > > > > Ah, I didn't know this was for FreeBSD. So you started to use our DTs, > > > or do you have some modifications to it? How does that work? > > > > Yes we use the DTS from linux from quite some times now. We're > > currently synced with 4.7-ish. We either use them directly or > > modify them according to our needs and driver support. > > Do you have a link to those modifications? > > Thanks, > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com Sure, https://svnweb.freebsd.org/base/head/sys/boot/fdt/dts/arm/ -- Emmanuel Vadot
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
On Thu, Dec 01, 2016 at 11:24:14AM +0100, Emmanuel Vadot wrote: > > > > > If num-cs isn't present nothing prevent to start a transfer > > > > > with a non-valid CS pin, resulting in an error. num-cs are > > > > > default property especially made for this and a SPI driver > > > > > should try to get the property at probe/attach time. > > > > > > > > Yes, but as far as I know, our driver doesn't. I'm all in for > > > > having support for that in our driver, but without it, that > > > > patch is kind of useless. > > > > > > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD > > > uses it. So it is not useless for downstream user of DTS. > > > > Ah, I didn't know this was for FreeBSD. So you started to use our DTs, > > or do you have some modifications to it? How does that work? > > Yes we use the DTS from linux from quite some times now. We're > currently synced with 4.7-ish. We either use them directly or > modify them according to our needs and driver support. Do you have a link to those modifications? Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com signature.asc Description: PGP signature
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
Hi Emmanuel, [auto build test ERROR on robh/for-next] [also build test ERROR on v4.9-rc7 next-20161202] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Emmanuel-Vadot/ARM-dts-sunxi-Add-num-cs-for-A20-spi-nodes/20161123-034323 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next config: arm-vexpress_defconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705 reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree make.cross ARCH=arm All errors (new ones prefixed by >>): >> Error: arch/arm/boot/dts/sun7i-a20.dtsi:874.13-14 syntax error >> FATAL ERROR: Unable to parse input tree --- 0-DAY kernel test infrastructureOpen Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation .config.gz Description: application/gzip
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
Hi Maxime, On Thu, 1 Dec 2016 10:21:50 +0100 Maxime Ripard wrote: > Hi Emmanuel, > > On Fri, Nov 25, 2016 at 10:07:52PM +0100, Emmanuel Vadot wrote: > > On Fri, 25 Nov 2016 16:20:47 +0100 > > Maxime Ripard wrote: > > > > > On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote: > > > > On Thu, 24 Nov 2016 20:55:17 +0100 > > > > Maxime Ripard wrote: > > > > > > > > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote: > > > > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while > > > > > > the > > > > > > others three only have 1. > > > > > > Add the num-cs property to each node. > > > > > > > > > > > > Signed-off-by: Emmanuel Vadot > > > > > > > > > > I don't think we have any code that uses it at the moment. What is the > > > > > rationale behind this patch? > > > > > > > > > > Thanks! > > > > > Maxime > > > > > > > > > > -- > > > > > Maxime Ripard, Free Electrons > > > > > Embedded Linux and Kernel engineering > > > > > http://free-electrons.com > > > > > > > > Hi Maxime, > > > > > > > > If num-cs isn't present nothing prevent to start a transfer with a > > > > non-valid CS pin, resulting in an error. > > > > num-cs are default property especially made for this and a SPI driver > > > > should try to get the property at probe/attach time. > > > > > > Yes, but as far as I know, our driver doesn't. I'm all in for having > > > support for that in our driver, but without it, that patch is kind of > > > useless. > > > > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD > > uses it. So it is not useless for downstream user of DTS. > > Ah, I didn't know this was for FreeBSD. So you started to use our DTs, > or do you have some modifications to it? How does that work? Yes we use the DTS from linux from quite some times now. We're currently synced with 4.7-ish. We either use them directly or modify them according to our needs and driver support. > Anyway, the fact that it isn't used by our driver at the moment and > that it's meant for other OSes should be mentionned in the commit log. Yeah I understand, I'll send a v2 with this in the commit log. > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com -- Emmanuel Vadot
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
Hi Emmanuel, On Fri, Nov 25, 2016 at 10:07:52PM +0100, Emmanuel Vadot wrote: > On Fri, 25 Nov 2016 16:20:47 +0100 > Maxime Ripard wrote: > > > On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote: > > > On Thu, 24 Nov 2016 20:55:17 +0100 > > > Maxime Ripard wrote: > > > > > > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote: > > > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the > > > > > others three only have 1. > > > > > Add the num-cs property to each node. > > > > > > > > > > Signed-off-by: Emmanuel Vadot > > > > > > > > I don't think we have any code that uses it at the moment. What is the > > > > rationale behind this patch? > > > > > > > > Thanks! > > > > Maxime > > > > > > > > -- > > > > Maxime Ripard, Free Electrons > > > > Embedded Linux and Kernel engineering > > > > http://free-electrons.com > > > > > > Hi Maxime, > > > > > > If num-cs isn't present nothing prevent to start a transfer with a > > > non-valid CS pin, resulting in an error. > > > num-cs are default property especially made for this and a SPI driver > > > should try to get the property at probe/attach time. > > > > Yes, but as far as I know, our driver doesn't. I'm all in for having > > support for that in our driver, but without it, that patch is kind of > > useless. > > Yes the Linux driver doesn't use it but my upcoming one for FreeBSD > uses it. So it is not useless for downstream user of DTS. Ah, I didn't know this was for FreeBSD. So you started to use our DTs, or do you have some modifications to it? How does that work? Anyway, the fact that it isn't used by our driver at the moment and that it's meant for other OSes should be mentionned in the commit log. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com signature.asc Description: PGP signature
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
On Fri, 25 Nov 2016 16:20:47 +0100 Maxime Ripard wrote: > On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote: > > On Thu, 24 Nov 2016 20:55:17 +0100 > > Maxime Ripard wrote: > > > > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote: > > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the > > > > others three only have 1. > > > > Add the num-cs property to each node. > > > > > > > > Signed-off-by: Emmanuel Vadot > > > > > > I don't think we have any code that uses it at the moment. What is the > > > rationale behind this patch? > > > > > > Thanks! > > > Maxime > > > > > > -- > > > Maxime Ripard, Free Electrons > > > Embedded Linux and Kernel engineering > > > http://free-electrons.com > > > > Hi Maxime, > > > > If num-cs isn't present nothing prevent to start a transfer with a > > non-valid CS pin, resulting in an error. > > num-cs are default property especially made for this and a SPI driver > > should try to get the property at probe/attach time. > > Yes, but as far as I know, our driver doesn't. I'm all in for having > support for that in our driver, but without it, that patch is kind of > useless. > > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com Yes the Linux driver doesn't use it but my upcoming one for FreeBSD uses it. So it is not useless for downstream user of DTS. Cheers, -- Emmanuel Vadot
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
On Thu, Nov 24, 2016 at 09:05:09PM +0100, Emmanuel Vadot wrote: > On Thu, 24 Nov 2016 20:55:17 +0100 > Maxime Ripard wrote: > > > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote: > > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the > > > others three only have 1. > > > Add the num-cs property to each node. > > > > > > Signed-off-by: Emmanuel Vadot > > > > I don't think we have any code that uses it at the moment. What is the > > rationale behind this patch? > > > > Thanks! > > Maxime > > > > -- > > Maxime Ripard, Free Electrons > > Embedded Linux and Kernel engineering > > http://free-electrons.com > > Hi Maxime, > > If num-cs isn't present nothing prevent to start a transfer with a > non-valid CS pin, resulting in an error. > num-cs are default property especially made for this and a SPI driver > should try to get the property at probe/attach time. Yes, but as far as I know, our driver doesn't. I'm all in for having support for that in our driver, but without it, that patch is kind of useless. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com signature.asc Description: PGP signature
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
On Thu, 24 Nov 2016 20:55:17 +0100 Maxime Ripard wrote: > On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote: > > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the > > others three only have 1. > > Add the num-cs property to each node. > > > > Signed-off-by: Emmanuel Vadot > > I don't think we have any code that uses it at the moment. What is the > rationale behind this patch? > > Thanks! > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux and Kernel engineering > http://free-electrons.com Hi Maxime, If num-cs isn't present nothing prevent to start a transfer with a non-valid CS pin, resulting in an error. num-cs are default property especially made for this and a SPI driver should try to get the property at probe/attach time. Cheers, -- Emmanuel Vadot
Re: [PATCH] ARM: dts: sunxi: Add num-cs for A20 spi nodes
On Tue, Nov 22, 2016 at 06:06:16PM +0100, Emmanuel Vadot wrote: > The spi0 controller on the A20 have up to 4 CS (Chip Select) while the > others three only have 1. > Add the num-cs property to each node. > > Signed-off-by: Emmanuel Vadot I don't think we have any code that uses it at the moment. What is the rationale behind this patch? Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com signature.asc Description: PGP signature