Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
Le mardi 08 novembre 2016 à 11:09 +, Jon Hunter a écrit : > On 08/11/16 11:07, Thierry Reding wrote: > > > > * PGP Signed by an unknown key > > > > On Tue, Nov 08, 2016 at 09:47:42AM +, Jon Hunter wrote: > > > > > > > > > On 08/11/16 08:54, Peter De Schrijver wrote: > > > > > > > > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > > > > > > > > > > > > > > > On 07/11/16 13:28, Thierry Reding wrote: > > > > > > > > > > > > > > > > > > > > Old Signed by an unknown key > > > > > > > > > > > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > > > > > > > > > > > > > > Nyan boards only have host USB ports (2 external, 1 internal), > > > > > > > there is > > > > > > > no OTG-enabled connector. > > > > > > > > > > > > > > Signed-off-by: Paul Kocialkowski> > > > > > > --- > > > > > > > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > > > > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > > > > > Where is this information coming from? I don't have one of the Nyans > > > > > > myself, but one of the Tegra132 devices I have, which I think was > > > > > > derived from one of the Nyans uses one of the external host ports as > > > > > > forced recovery port, for which it would need OTG. > > > > > > > > > > > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > > > > > > In that case I think one of the ports must be OTG. > > > > > > > > > > It is true that the port on the back on the nyan-big can be used with > > > > > recovery mode. I was thinking that this is not a true OTG port as it > > > > > is > > > > > just a 4-pin type A socket and does not have an ID pin. Thinking some > > > > > more about this the USB spec does include a "Host Negotiation Protocol > > > > > (HNP)" that allows a host and device to swap roles and so keeping it > > > > > as > > > > > OTG seems valid afterall. > > > > > > > > I don't think the bootrom implements that though. I expect recovery mode > > > > to just program the controller in device mode, without performing any > > > > negotiation. > > > > > > I am not talking about the bootrom and I would not expect the bootrom to > > > do that. However, the kernel could. > > > > Either way, configuring the controller in device mode is enough to make > > the host detect it, otherwise tegrarcm wouldn't work. > > > > From the point of view of the binding I think "otg" is the most accurate > > option because we know that the controller can operate in both modes. If > > it currently doesn't or how exactly switching modes is done is outside > > the scope of this property. > > > > Is everyone okay with just dropping this patch? > > Fine with me. Same here. -- Paul Kocialkowski, developer of low-level free software for embedded devices Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ signature.asc Description: This is a digitally signed message part
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
Le mardi 08 novembre 2016 à 11:09 +, Jon Hunter a écrit : > On 08/11/16 11:07, Thierry Reding wrote: > > > > * PGP Signed by an unknown key > > > > On Tue, Nov 08, 2016 at 09:47:42AM +, Jon Hunter wrote: > > > > > > > > > On 08/11/16 08:54, Peter De Schrijver wrote: > > > > > > > > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > > > > > > > > > > > > > > > On 07/11/16 13:28, Thierry Reding wrote: > > > > > > > > > > > > > > > > > > > > Old Signed by an unknown key > > > > > > > > > > > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > > > > > > > > > > > > > > Nyan boards only have host USB ports (2 external, 1 internal), > > > > > > > there is > > > > > > > no OTG-enabled connector. > > > > > > > > > > > > > > Signed-off-by: Paul Kocialkowski > > > > > > > --- > > > > > > > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > > > > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > > > > > Where is this information coming from? I don't have one of the Nyans > > > > > > myself, but one of the Tegra132 devices I have, which I think was > > > > > > derived from one of the Nyans uses one of the external host ports as > > > > > > forced recovery port, for which it would need OTG. > > > > > > > > > > > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > > > > > > In that case I think one of the ports must be OTG. > > > > > > > > > > It is true that the port on the back on the nyan-big can be used with > > > > > recovery mode. I was thinking that this is not a true OTG port as it > > > > > is > > > > > just a 4-pin type A socket and does not have an ID pin. Thinking some > > > > > more about this the USB spec does include a "Host Negotiation Protocol > > > > > (HNP)" that allows a host and device to swap roles and so keeping it > > > > > as > > > > > OTG seems valid afterall. > > > > > > > > I don't think the bootrom implements that though. I expect recovery mode > > > > to just program the controller in device mode, without performing any > > > > negotiation. > > > > > > I am not talking about the bootrom and I would not expect the bootrom to > > > do that. However, the kernel could. > > > > Either way, configuring the controller in device mode is enough to make > > the host detect it, otherwise tegrarcm wouldn't work. > > > > From the point of view of the binding I think "otg" is the most accurate > > option because we know that the controller can operate in both modes. If > > it currently doesn't or how exactly switching modes is done is outside > > the scope of this property. > > > > Is everyone okay with just dropping this patch? > > Fine with me. Same here. -- Paul Kocialkowski, developer of low-level free software for embedded devices Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ signature.asc Description: This is a digitally signed message part
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On Tue, Nov 08, 2016 at 09:47:42AM +, Jon Hunter wrote: > > On 08/11/16 08:54, Peter De Schrijver wrote: > > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > >> > >> On 07/11/16 13:28, Thierry Reding wrote: > >>> * PGP Signed by an unknown key > >>> > >>> On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > Nyan boards only have host USB ports (2 external, 1 internal), there is > no OTG-enabled connector. > > Signed-off-by: Paul Kocialkowski> --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > >>> > >>> Where is this information coming from? I don't have one of the Nyans > >>> myself, but one of the Tegra132 devices I have, which I think was > >>> derived from one of the Nyans uses one of the external host ports as > >>> forced recovery port, for which it would need OTG. > >>> > >>> I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > >>> In that case I think one of the ports must be OTG. > >> > >> It is true that the port on the back on the nyan-big can be used with > >> recovery mode. I was thinking that this is not a true OTG port as it is > >> just a 4-pin type A socket and does not have an ID pin. Thinking some > >> more about this the USB spec does include a "Host Negotiation Protocol > >> (HNP)" that allows a host and device to swap roles and so keeping it as > >> OTG seems valid afterall. > > > > I don't think the bootrom implements that though. I expect recovery mode > > to just program the controller in device mode, without performing any > > negotiation. > > I am not talking about the bootrom and I would not expect the bootrom to > do that. However, the kernel could. Either way, configuring the controller in device mode is enough to make the host detect it, otherwise tegrarcm wouldn't work. From the point of view of the binding I think "otg" is the most accurate option because we know that the controller can operate in both modes. If it currently doesn't or how exactly switching modes is done is outside the scope of this property. Is everyone okay with just dropping this patch? Thierry signature.asc Description: PGP signature
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On Tue, Nov 08, 2016 at 09:47:42AM +, Jon Hunter wrote: > > On 08/11/16 08:54, Peter De Schrijver wrote: > > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > >> > >> On 07/11/16 13:28, Thierry Reding wrote: > >>> * PGP Signed by an unknown key > >>> > >>> On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > Nyan boards only have host USB ports (2 external, 1 internal), there is > no OTG-enabled connector. > > Signed-off-by: Paul Kocialkowski > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > >>> > >>> Where is this information coming from? I don't have one of the Nyans > >>> myself, but one of the Tegra132 devices I have, which I think was > >>> derived from one of the Nyans uses one of the external host ports as > >>> forced recovery port, for which it would need OTG. > >>> > >>> I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > >>> In that case I think one of the ports must be OTG. > >> > >> It is true that the port on the back on the nyan-big can be used with > >> recovery mode. I was thinking that this is not a true OTG port as it is > >> just a 4-pin type A socket and does not have an ID pin. Thinking some > >> more about this the USB spec does include a "Host Negotiation Protocol > >> (HNP)" that allows a host and device to swap roles and so keeping it as > >> OTG seems valid afterall. > > > > I don't think the bootrom implements that though. I expect recovery mode > > to just program the controller in device mode, without performing any > > negotiation. > > I am not talking about the bootrom and I would not expect the bootrom to > do that. However, the kernel could. Either way, configuring the controller in device mode is enough to make the host detect it, otherwise tegrarcm wouldn't work. From the point of view of the binding I think "otg" is the most accurate option because we know that the controller can operate in both modes. If it currently doesn't or how exactly switching modes is done is outside the scope of this property. Is everyone okay with just dropping this patch? Thierry signature.asc Description: PGP signature
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 08/11/16 11:07, Thierry Reding wrote: > * PGP Signed by an unknown key > > On Tue, Nov 08, 2016 at 09:47:42AM +, Jon Hunter wrote: >> >> On 08/11/16 08:54, Peter De Schrijver wrote: >>> On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: On 07/11/16 13:28, Thierry Reding wrote: >> Old Signed by an unknown key > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: >> Nyan boards only have host USB ports (2 external, 1 internal), there is >> no OTG-enabled connector. >> >> Signed-off-by: Paul Kocialkowski>> --- >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > > Where is this information coming from? I don't have one of the Nyans > myself, but one of the Tegra132 devices I have, which I think was > derived from one of the Nyans uses one of the external host ports as > forced recovery port, for which it would need OTG. > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > In that case I think one of the ports must be OTG. It is true that the port on the back on the nyan-big can be used with recovery mode. I was thinking that this is not a true OTG port as it is just a 4-pin type A socket and does not have an ID pin. Thinking some more about this the USB spec does include a "Host Negotiation Protocol (HNP)" that allows a host and device to swap roles and so keeping it as OTG seems valid afterall. >>> >>> I don't think the bootrom implements that though. I expect recovery mode >>> to just program the controller in device mode, without performing any >>> negotiation. >> >> I am not talking about the bootrom and I would not expect the bootrom to >> do that. However, the kernel could. > > Either way, configuring the controller in device mode is enough to make > the host detect it, otherwise tegrarcm wouldn't work. > > From the point of view of the binding I think "otg" is the most accurate > option because we know that the controller can operate in both modes. If > it currently doesn't or how exactly switching modes is done is outside > the scope of this property. > > Is everyone okay with just dropping this patch? Fine with me. Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 08/11/16 11:07, Thierry Reding wrote: > * PGP Signed by an unknown key > > On Tue, Nov 08, 2016 at 09:47:42AM +, Jon Hunter wrote: >> >> On 08/11/16 08:54, Peter De Schrijver wrote: >>> On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: On 07/11/16 13:28, Thierry Reding wrote: >> Old Signed by an unknown key > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: >> Nyan boards only have host USB ports (2 external, 1 internal), there is >> no OTG-enabled connector. >> >> Signed-off-by: Paul Kocialkowski >> --- >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > > Where is this information coming from? I don't have one of the Nyans > myself, but one of the Tegra132 devices I have, which I think was > derived from one of the Nyans uses one of the external host ports as > forced recovery port, for which it would need OTG. > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > In that case I think one of the ports must be OTG. It is true that the port on the back on the nyan-big can be used with recovery mode. I was thinking that this is not a true OTG port as it is just a 4-pin type A socket and does not have an ID pin. Thinking some more about this the USB spec does include a "Host Negotiation Protocol (HNP)" that allows a host and device to swap roles and so keeping it as OTG seems valid afterall. >>> >>> I don't think the bootrom implements that though. I expect recovery mode >>> to just program the controller in device mode, without performing any >>> negotiation. >> >> I am not talking about the bootrom and I would not expect the bootrom to >> do that. However, the kernel could. > > Either way, configuring the controller in device mode is enough to make > the host detect it, otherwise tegrarcm wouldn't work. > > From the point of view of the binding I think "otg" is the most accurate > option because we know that the controller can operate in both modes. If > it currently doesn't or how exactly switching modes is done is outside > the scope of this property. > > Is everyone okay with just dropping this patch? Fine with me. Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 08/11/16 08:54, Peter De Schrijver wrote: > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: >> >> On 07/11/16 13:28, Thierry Reding wrote: >>> * PGP Signed by an unknown key >>> >>> On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: Nyan boards only have host USB ports (2 external, 1 internal), there is no OTG-enabled connector. Signed-off-by: Paul Kocialkowski--- arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> Where is this information coming from? I don't have one of the Nyans >>> myself, but one of the Tegra132 devices I have, which I think was >>> derived from one of the Nyans uses one of the external host ports as >>> forced recovery port, for which it would need OTG. >>> >>> I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? >>> In that case I think one of the ports must be OTG. >> >> It is true that the port on the back on the nyan-big can be used with >> recovery mode. I was thinking that this is not a true OTG port as it is >> just a 4-pin type A socket and does not have an ID pin. Thinking some >> more about this the USB spec does include a "Host Negotiation Protocol >> (HNP)" that allows a host and device to swap roles and so keeping it as >> OTG seems valid afterall. > > I don't think the bootrom implements that though. I expect recovery mode > to just program the controller in device mode, without performing any > negotiation. I am not talking about the bootrom and I would not expect the bootrom to do that. However, the kernel could. Cheers Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 08/11/16 08:54, Peter De Schrijver wrote: > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: >> >> On 07/11/16 13:28, Thierry Reding wrote: >>> * PGP Signed by an unknown key >>> >>> On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: Nyan boards only have host USB ports (2 external, 1 internal), there is no OTG-enabled connector. Signed-off-by: Paul Kocialkowski --- arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> Where is this information coming from? I don't have one of the Nyans >>> myself, but one of the Tegra132 devices I have, which I think was >>> derived from one of the Nyans uses one of the external host ports as >>> forced recovery port, for which it would need OTG. >>> >>> I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? >>> In that case I think one of the ports must be OTG. >> >> It is true that the port on the back on the nyan-big can be used with >> recovery mode. I was thinking that this is not a true OTG port as it is >> just a 4-pin type A socket and does not have an ID pin. Thinking some >> more about this the USB spec does include a "Host Negotiation Protocol >> (HNP)" that allows a host and device to swap roles and so keeping it as >> OTG seems valid afterall. > > I don't think the bootrom implements that though. I expect recovery mode > to just program the controller in device mode, without performing any > negotiation. I am not talking about the bootrom and I would not expect the bootrom to do that. However, the kernel could. Cheers Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
Le mardi 08 novembre 2016 à 10:54 +0200, Peter De Schrijver a écrit : > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > > > > On 07/11/16 13:28, Thierry Reding wrote: > > > * PGP Signed by an unknown key > > > > > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > > > > Nyan boards only have host USB ports (2 external, 1 internal), there is > > > > no OTG-enabled connector. > > > > > > > > Signed-off-by: Paul Kocialkowski> > > > --- > > > > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > Where is this information coming from? I don't have one of the Nyans > > > myself, but one of the Tegra132 devices I have, which I think was > > > derived from one of the Nyans uses one of the external host ports as > > > forced recovery port, for which it would need OTG. > > > > > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > > > In that case I think one of the ports must be OTG. > > > > It is true that the port on the back on the nyan-big can be used with > > recovery mode. I was thinking that this is not a true OTG port as it is > > just a 4-pin type A socket and does not have an ID pin. Thinking some > > more about this the USB spec does include a "Host Negotiation Protocol > > (HNP)" that allows a host and device to swap roles and so keeping it as > > OTG seems valid afterall. > > I don't think the bootrom implements that though. I expect recovery mode > to just program the controller in device mode, without performing any > negotiation. That would make sense. However, if there's a way (even not implemented yet, but a possible way) to have the kernel configure this port as USB device instead of host dynamically (e.g. without changing this bit in the dts), then I think it makes sense to keep the OTG marking and drop this patch. After all, switching to USB device mode doesn't necessarily have to come from the ID pin. -- Paul Kocialkowski, developer of free digital technology at the lower levels Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ signature.asc Description: This is a digitally signed message part
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
Le mardi 08 novembre 2016 à 10:54 +0200, Peter De Schrijver a écrit : > On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > > > > On 07/11/16 13:28, Thierry Reding wrote: > > > * PGP Signed by an unknown key > > > > > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > > > > Nyan boards only have host USB ports (2 external, 1 internal), there is > > > > no OTG-enabled connector. > > > > > > > > Signed-off-by: Paul Kocialkowski > > > > --- > > > > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > Where is this information coming from? I don't have one of the Nyans > > > myself, but one of the Tegra132 devices I have, which I think was > > > derived from one of the Nyans uses one of the external host ports as > > > forced recovery port, for which it would need OTG. > > > > > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > > > In that case I think one of the ports must be OTG. > > > > It is true that the port on the back on the nyan-big can be used with > > recovery mode. I was thinking that this is not a true OTG port as it is > > just a 4-pin type A socket and does not have an ID pin. Thinking some > > more about this the USB spec does include a "Host Negotiation Protocol > > (HNP)" that allows a host and device to swap roles and so keeping it as > > OTG seems valid afterall. > > I don't think the bootrom implements that though. I expect recovery mode > to just program the controller in device mode, without performing any > negotiation. That would make sense. However, if there's a way (even not implemented yet, but a possible way) to have the kernel configure this port as USB device instead of host dynamically (e.g. without changing this bit in the dts), then I think it makes sense to keep the OTG marking and drop this patch. After all, switching to USB device mode doesn't necessarily have to come from the ID pin. -- Paul Kocialkowski, developer of free digital technology at the lower levels Website: https://www.paulk.fr/ Coding blog: https://code.paulk.fr/ Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/ signature.asc Description: This is a digitally signed message part
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > > On 07/11/16 13:28, Thierry Reding wrote: > > * PGP Signed by an unknown key > > > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > >> Nyan boards only have host USB ports (2 external, 1 internal), there is > >> no OTG-enabled connector. > >> > >> Signed-off-by: Paul Kocialkowski> >> --- > >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > > > > Where is this information coming from? I don't have one of the Nyans > > myself, but one of the Tegra132 devices I have, which I think was > > derived from one of the Nyans uses one of the external host ports as > > forced recovery port, for which it would need OTG. > > > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > > In that case I think one of the ports must be OTG. > > It is true that the port on the back on the nyan-big can be used with > recovery mode. I was thinking that this is not a true OTG port as it is > just a 4-pin type A socket and does not have an ID pin. Thinking some > more about this the USB spec does include a "Host Negotiation Protocol > (HNP)" that allows a host and device to swap roles and so keeping it as > OTG seems valid afterall. I don't think the bootrom implements that though. I expect recovery mode to just program the controller in device mode, without performing any negotiation. Peter.
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On Mon, Nov 07, 2016 at 02:09:31PM +, Jon Hunter wrote: > > On 07/11/16 13:28, Thierry Reding wrote: > > * PGP Signed by an unknown key > > > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > >> Nyan boards only have host USB ports (2 external, 1 internal), there is > >> no OTG-enabled connector. > >> > >> Signed-off-by: Paul Kocialkowski > >> --- > >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > > > > Where is this information coming from? I don't have one of the Nyans > > myself, but one of the Tegra132 devices I have, which I think was > > derived from one of the Nyans uses one of the external host ports as > > forced recovery port, for which it would need OTG. > > > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > > In that case I think one of the ports must be OTG. > > It is true that the port on the back on the nyan-big can be used with > recovery mode. I was thinking that this is not a true OTG port as it is > just a 4-pin type A socket and does not have an ID pin. Thinking some > more about this the USB spec does include a "Host Negotiation Protocol > (HNP)" that allows a host and device to swap roles and so keeping it as > OTG seems valid afterall. I don't think the bootrom implements that though. I expect recovery mode to just program the controller in device mode, without performing any negotiation. Peter.
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 07/11/16 13:28, Thierry Reding wrote: > * PGP Signed by an unknown key > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: >> Nyan boards only have host USB ports (2 external, 1 internal), there is >> no OTG-enabled connector. >> >> Signed-off-by: Paul Kocialkowski>> --- >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > > Where is this information coming from? I don't have one of the Nyans > myself, but one of the Tegra132 devices I have, which I think was > derived from one of the Nyans uses one of the external host ports as > forced recovery port, for which it would need OTG. > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > In that case I think one of the ports must be OTG. It is true that the port on the back on the nyan-big can be used with recovery mode. I was thinking that this is not a true OTG port as it is just a 4-pin type A socket and does not have an ID pin. Thinking some more about this the USB spec does include a "Host Negotiation Protocol (HNP)" that allows a host and device to swap roles and so keeping it as OTG seems valid afterall. Cheers Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 07/11/16 13:28, Thierry Reding wrote: > * PGP Signed by an unknown key > > On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: >> Nyan boards only have host USB ports (2 external, 1 internal), there is >> no OTG-enabled connector. >> >> Signed-off-by: Paul Kocialkowski >> --- >> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) > > Where is this information coming from? I don't have one of the Nyans > myself, but one of the Tegra132 devices I have, which I think was > derived from one of the Nyans uses one of the external host ports as > forced recovery port, for which it would need OTG. > > I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? > In that case I think one of the ports must be OTG. It is true that the port on the back on the nyan-big can be used with recovery mode. I was thinking that this is not a true OTG port as it is just a 4-pin type A socket and does not have an ID pin. Thinking some more about this the USB spec does include a "Host Negotiation Protocol (HNP)" that allows a host and device to swap roles and so keeping it as OTG seems valid afterall. Cheers Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > Nyan boards only have host USB ports (2 external, 1 internal), there is > no OTG-enabled connector. > > Signed-off-by: Paul Kocialkowski> --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Where is this information coming from? I don't have one of the Nyans myself, but one of the Tegra132 devices I have, which I think was derived from one of the Nyans uses one of the external host ports as forced recovery port, for which it would need OTG. I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? In that case I think one of the ports must be OTG. Thierry signature.asc Description: PGP signature
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On Sun, Sep 18, 2016 at 12:28:52PM +0200, Paul Kocialkowski wrote: > Nyan boards only have host USB ports (2 external, 1 internal), there is > no OTG-enabled connector. > > Signed-off-by: Paul Kocialkowski > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Where is this information coming from? I don't have one of the Nyans myself, but one of the Tegra132 devices I have, which I think was derived from one of the Nyans uses one of the external host ports as forced recovery port, for which it would need OTG. I suspect that the way to get U-Boot onto the Nyans is via tegrarcm? In that case I think one of the ports must be OTG. Thierry signature.asc Description: PGP signature
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 18/09/16 11:28, Paul Kocialkowski wrote: > Nyan boards only have host USB ports (2 external, 1 internal), there is > no OTG-enabled connector. > > Signed-off-by: Paul Kocialkowski> --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi > b/arch/arm/boot/dts/tegra124-nyan.dtsi > index 18db797..254b2ee 100644 > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > @@ -435,7 +435,7 @@ > usb2-0 { > vbus-supply = <_usb1_vbus>; > status = "okay"; > - mode = "otg"; > + mode = "host"; > }; > > usb2-1 { Sounds correct to me, so ... Acked-by: Jon Hunter Cheers Jon -- nvpublic
Re: [PATCH] ARM: tegra: nyan: Mark all USB ports as host
On 18/09/16 11:28, Paul Kocialkowski wrote: > Nyan boards only have host USB ports (2 external, 1 internal), there is > no OTG-enabled connector. > > Signed-off-by: Paul Kocialkowski > --- > arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi > b/arch/arm/boot/dts/tegra124-nyan.dtsi > index 18db797..254b2ee 100644 > --- a/arch/arm/boot/dts/tegra124-nyan.dtsi > +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi > @@ -435,7 +435,7 @@ > usb2-0 { > vbus-supply = <_usb1_vbus>; > status = "okay"; > - mode = "otg"; > + mode = "host"; > }; > > usb2-1 { Sounds correct to me, so ... Acked-by: Jon Hunter Cheers Jon -- nvpublic