On Tue, Mar 13, 2018 at 09:19:22AM +0100, Hans de Goede wrote:
> Hi,
>
> On 12-03-18 22:23, SF Markus Elfring wrote:
> >From: Markus Elfring
> >Date: Mon, 12 Mar 2018 22:15:59 +0100
> >
> >Adjust jump targets so that a bit of exception handling can be better
> >reused at the end of this function.
> >
> >This issue was detected by using the Coccinelle software.
> >
> >Signed-off-by: Markus Elfring
>
> So now we have a goto set_error_code with the code at the set_error_code
> doing something and then doing another goto. No, just no. goto-s going to
> a label calling another goto is completely unreadable.
>
> I really do not see any reason for the proposed changes, they may remove
> a small amount of code duplication, but at a hugh cost wrt readability.
>
> TL;DR: NACK
>
Fully agree. NACK confirmed.
Guenter
> Regards,
>
> Hans
>
>
>
> >---
> > drivers/hwmon/sch5627.c | 60
> > -
> > 1 file changed, 29 insertions(+), 31 deletions(-)
> >
> >diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
> >index 91544f2312e6..e7a2a974ab74 100644
> >--- a/drivers/hwmon/sch5627.c
> >+++ b/drivers/hwmon/sch5627.c
> >@@ -480,72 +480,64 @@ static int sch5627_probe(struct platform_device *pdev)
> > platform_set_drvdata(pdev, data);
> > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_HWMON_ID);
> >-if (val < 0) {
> >-err = val;
> >-goto error;
> >-}
> >+if (val < 0)
> >+goto set_error_code;
> >+
> > if (val != SCH5627_HWMON_ID) {
> > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon",
> >val, SCH5627_HWMON_ID);
> >-err = -ENODEV;
> >-goto error;
> >+goto e_nodev;
> > }
> > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_COMPANY_ID);
> >-if (val < 0) {
> >-err = val;
> >-goto error;
> >-}
> >+if (val < 0)
> >+goto set_error_code;
> >+
> > if (val != SCH5627_COMPANY_ID) {
> > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company",
> >val, SCH5627_COMPANY_ID);
> >-err = -ENODEV;
> >-goto error;
> >+goto e_nodev;
> > }
> > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_PRIMARY_ID);
> >-if (val < 0) {
> >-err = val;
> >-goto error;
> >-}
> >+if (val < 0)
> >+goto set_error_code;
> >+
> > if (val != SCH5627_PRIMARY_ID) {
> > pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary",
> >val, SCH5627_PRIMARY_ID);
> >-err = -ENODEV;
> >-goto error;
> >+goto e_nodev;
> > }
> > build_code = sch56xx_read_virtual_reg(data->addr,
> > SCH5627_REG_BUILD_CODE);
> > if (build_code < 0) {
> > err = build_code;
> >-goto error;
> >+goto remove_device;
> > }
> > build_id = sch56xx_read_virtual_reg16(data->addr,
> > SCH5627_REG_BUILD_ID);
> > if (build_id < 0) {
> > err = build_id;
> >-goto error;
> >+goto remove_device;
> > }
> > hwmon_rev = sch56xx_read_virtual_reg(data->addr,
> > SCH5627_REG_HWMON_REV);
> > if (hwmon_rev < 0) {
> > err = hwmon_rev;
> >-goto error;
> >+goto remove_device;
> > }
> > val = sch56xx_read_virtual_reg(data->addr, SCH5627_REG_CTRL);
> >-if (val < 0) {
> >-err = val;
> >-goto error;
> >-}
> >+if (val < 0)
> >+goto set_error_code;
> >+
> > data->control = val;
> > if (!(data->control & 0x01)) {
> > pr_err("hardware monitoring not enabled\n");
> >-err = -ENODEV;
> >-goto error;
> >+goto e_nodev;
> > }
> > /* Trigger a Vbat voltage measurement, so that we get a valid reading
> >the first time we read Vbat */
> >@@ -559,7 +551,7 @@ static int sch5627_probe(struct platform_device *pdev)
> > */
> > err = sch5627_read_limits(data);
> > if (err)
> >-goto error;
> >+goto remove_device;
> > pr_info("found %s chip at %#hx\n", DEVNAME, data->addr);
> > pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n",
> >@@ -568,13 +560,13 @@ static int sch5627_probe(struct platform_device *pdev)
> > /* Register sysfs interface files */
> > err = sysfs_create_group(&pdev->dev.kobj, &sch5627_group);
> > if (err)
> >-goto error;
> >+goto remove_device;
> > data->hwmon_dev = hwmon_device_register(&pdev->dev);
> > if (IS_ERR(data->hwmon_dev)) {
> > err = PTR_ERR(data->hwmon_dev);
> > data->hwmon_dev = NULL;
> >-goto error;
> >+