Hi Jerry,
On 2020/6/13 7:10, Jerry Snitselaar wrote:
Move Intel Kconfig and Makefile bits down into intel directory
with the rest of the Intel specific files.
Cc: Joerg Roedel
Cc: Lu Baolu
Thanks!
Reviewed-by: Lu Baolu
Best regards,
baolu
Signed-off-by: Jerry Snitselaar
---
drivers/iommu/Kconfig| 86 +---
drivers/iommu/Makefile | 8 +---
drivers/iommu/intel/Kconfig | 86
drivers/iommu/intel/Makefile | 7 +++
4 files changed, 96 insertions(+), 91 deletions(-)
create mode 100644 drivers/iommu/intel/Kconfig
create mode 100644 drivers/iommu/intel/Makefile
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index aca76383f201..b12d4ec124f6 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -176,91 +176,7 @@ config AMD_IOMMU_DEBUGFS
This option is -NOT- intended for production environments, and should
not generally be enabled.
-# Intel IOMMU support
-config DMAR_TABLE
- bool
-
-config INTEL_IOMMU
- bool "Support for Intel IOMMU using DMA Remapping Devices"
- depends on PCI_MSI && ACPI && (X86 || IA64)
- select IOMMU_API
- select IOMMU_IOVA
- select NEED_DMA_MAP_STATE
- select DMAR_TABLE
- select SWIOTLB
- select IOASID
- help
- DMA remapping (DMAR) devices support enables independent address
- translations for Direct Memory Access (DMA) from devices.
- These DMA remapping devices are reported via ACPI tables
- and include PCI device scope covered by these DMA
- remapping devices.
-
-config INTEL_IOMMU_DEBUGFS
- bool "Export Intel IOMMU internals in Debugfs"
- depends on INTEL_IOMMU && IOMMU_DEBUGFS
- help
- !!!WARNING!!!
-
- DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
-
- Expose Intel IOMMU internals in Debugfs.
-
- This option is -NOT- intended for production environments, and should
- only be enabled for debugging Intel IOMMU.
-
-config INTEL_IOMMU_SVM
- bool "Support for Shared Virtual Memory with Intel IOMMU"
- depends on INTEL_IOMMU && X86
- select PCI_PASID
- select PCI_PRI
- select MMU_NOTIFIER
- select IOASID
- help
- Shared Virtual Memory (SVM) provides a facility for devices
- to access DMA resources through process address space by
- means of a Process Address Space ID (PASID).
-
-config INTEL_IOMMU_DEFAULT_ON
- def_bool y
- prompt "Enable Intel DMA Remapping Devices by default"
- depends on INTEL_IOMMU
- help
- Selecting this option will enable a DMAR device at boot time if
- one is found. If this option is not selected, DMAR support can
- be enabled by passing intel_iommu=on to the kernel.
-
-config INTEL_IOMMU_BROKEN_GFX_WA
- bool "Workaround broken graphics drivers (going away soon)"
- depends on INTEL_IOMMU && BROKEN && X86
- ---help---
- Current Graphics drivers tend to use physical address
- for DMA and avoid using DMA APIs. Setting this config
- option permits the IOMMU driver to set a unity map for
- all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA, at least until this
- option is removed in the 2.6.32 kernel.
-
-config INTEL_IOMMU_FLOPPY_WA
- def_bool y
- depends on INTEL_IOMMU && X86
- ---help---
- Floppy disk drivers are known to bypass DMA API calls
- thereby failing to work when IOMMU is enabled. This
- workaround will setup a 1:1 mapping for the first
- 16MiB to make floppy (an ISA device) work.
-
-config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
- bool "Enable Intel IOMMU scalable mode by default"
- depends on INTEL_IOMMU
- help
- Selecting this option will enable by default the scalable mode if
- hardware presents the capability. The scalable mode is defined in
- VT-d 3.0. The scalable mode capability could be checked by reading
- /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option
- is not selected, scalable mode support could also be enabled by
- passing intel_iommu=sm_on to the kernel. If not sure, please use
- the default value.
+source "drivers/iommu/intel/Kconfig"
config IRQ_REMAP
bool "Support for Interrupt Remapping"
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 342190196dfb..71dd2f382e78 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+obj-y += intel/
obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_IOMMU_API) += iommu-traces.o
obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
@@ -17,13 +18,8 @@ obj-$(CONFIG_AMD_IOMMU_V2) += amd/iommu_v2.o
obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
arm_smmu-ob