Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-03-15 Thread Lorenzo Pieralisi
[CC'ed Gustavo]

On Fri, Mar 09, 2018 at 09:53:24AM +0530, Vignesh R wrote:
> 
> 
> On Tuesday 06 March 2018 08:42 PM, Lorenzo Pieralisi wrote:
> > On Thu, Feb 15, 2018 at 09:59:21AM +0530, Vignesh R wrote:
> >> Hi,
> >>
> >> On Monday 12 February 2018 11:28 PM, Lorenzo Pieralisi wrote:
> >>> On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
>  We need to ensure that there are no pending MSI IRQ vector set (i.e
>  PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
>  dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
>  register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
>  pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
>  returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.
> 
>  This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
>  8260 used to throw following error and stall during ping/iperf3 tests.
> 
>  [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.
> 
>  Signed-off-by: Vignesh R 
>  ---
>    drivers/pci/dwc/pci-dra7xx.c | 21 ++---
>    1 file changed, 18 insertions(+), 3 deletions(-)
> 
>  diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>  index ed8558d638e5..3420cbf7b60a 100644
>  --- a/drivers/pci/dwc/pci-dra7xx.c
>  +++ b/drivers/pci/dwc/pci-dra7xx.c
>  @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int 
>  irq, void *arg)
>      struct dra7xx_pcie *dra7xx = arg;
>      struct dw_pcie *pci = dra7xx->pci;
>      struct pcie_port *pp = &pci->pp;
>  + int count = 0;
>      unsigned long reg;
>      u32 virq, bit;
>    
>      reg = dra7xx_pcie_readl(dra7xx, 
>  PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
>  + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, 
>  reg);
>    
>      switch (reg) {
>      case MSI:
>  - dw_handle_msi_irq(pp);
>  + /*
>  +  * Need to make sure no MSI IRQs are pending before
>  +  * exiting handler, else the wrapper will not catch new
>  +  * IRQs. So loop around till dw_handle_msi_irq() returns
>  +  * IRQ_NONE
>  +  */
>  + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
>  + count++;
>  +
>  + if (count == 1000) {
>  + dev_err(pci->dev, "too much work in msi irq\n");
>  + dra7xx_pcie_writel(dra7xx,
>  +    
>  PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
>  +    reg);
>  + return IRQ_HANDLED;
> >>>
> >>> I am not merging any code patching this IRQ handling routine anymore
> >>> unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
> >>> works (and how it is related to DW registers) and why this specific host
> >>> controller needs handling that is not required by any other host
> >>> controller relying on dw_handle_msi_irq().
> >>
> >> Unlike other DW PCIe controllers, TI implementation has a wrapper on top
> >> of DW core. This wrapper latches the DW core level MSI and legacy
> >> interrupts and then propagates it to GIC.
> >> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI register is present in this TI
> >> wrapper which aggregates all the MSI IRQs(PCIE_MSI_INTR0_STATUS) of DW
> >> level. They are mapped on the MSI interrupt line of PCIe controller,
> >> using a single status bit in the PCIECTRL_TI_CONF_IRQSTATUS_MSI register.
> >>
> >> So, the irq handler, dra7xx_pcie_msi_irq_handler(), first needs to look
> >> at PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI[4] to know that its MSI IRQ and
> >> then call dw_handle_msi_irq() to handle individual MSI vectors.
> >> Driver has to make sure there are no pending vectors in DW core MSI
> > 
> > How can it make *sure* ? And what makes the wrapper latch MSI IRQs
> > again ?
> > 
> 
> This is the sequence that I got from discussion with internal HW team:
>  1. read CONF_IRQSTATUS_MSI in wrapper and check if MSI bit
>  2. clear CONF_IRQSTATUS_MSI
>  3. read, clear and handle PCIE_MSI_INTR0_STATUS vectors
>  4. repeat step 3 until PCIE_MSI_INTR0_STATUS reads 0
> 
> If read of PCIE_MSI_INTR0_STATUS returns 0 at least once, then its
> guaranteed that the next time any vector is set in PCIE_MSI_INTR0_STATUS
> register(due to MSI IRQ), wrapper will latch it and raise an IRQ to CPU.
> 
> 
> >> status register before exiting handler. Otherwise next MSI IRQ will not
> >> be latched by the wrapper.

Hi Vignesh,

thank you for explaining. To me - this looks like it is better to write
a separate IRQ chip implementation for DRA7XX, let's face it this patch
is a bit hackish (and will prevent us from removing dw_handle_msi_irq()
altogether -

Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-03-08 Thread Vignesh R


On Tuesday 06 March 2018 08:42 PM, Lorenzo Pieralisi wrote:
> On Thu, Feb 15, 2018 at 09:59:21AM +0530, Vignesh R wrote:
>> Hi,
>>
>> On Monday 12 February 2018 11:28 PM, Lorenzo Pieralisi wrote:
>>> On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
 We need to ensure that there are no pending MSI IRQ vector set (i.e
 PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
 dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
 register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
 pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
 returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.

 This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
 8260 used to throw following error and stall during ping/iperf3 tests.

 [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.

 Signed-off-by: Vignesh R 
 ---
   drivers/pci/dwc/pci-dra7xx.c | 21 ++---
   1 file changed, 18 insertions(+), 3 deletions(-)

 diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
 index ed8558d638e5..3420cbf7b60a 100644
 --- a/drivers/pci/dwc/pci-dra7xx.c
 +++ b/drivers/pci/dwc/pci-dra7xx.c
 @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int 
 irq, void *arg)
     struct dra7xx_pcie *dra7xx = arg;
     struct dw_pcie *pci = dra7xx->pci;
     struct pcie_port *pp = &pci->pp;
 + int count = 0;
     unsigned long reg;
     u32 virq, bit;
   
     reg = dra7xx_pcie_readl(dra7xx, 
 PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
 + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
   
     switch (reg) {
     case MSI:
 - dw_handle_msi_irq(pp);
 + /*
 +  * Need to make sure no MSI IRQs are pending before
 +  * exiting handler, else the wrapper will not catch new
 +  * IRQs. So loop around till dw_handle_msi_irq() returns
 +  * IRQ_NONE
 +  */
 + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
 + count++;
 +
 + if (count == 1000) {
 + dev_err(pci->dev, "too much work in msi irq\n");
 + dra7xx_pcie_writel(dra7xx,
 +    
 PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
 +    reg);
 + return IRQ_HANDLED;
>>>
>>> I am not merging any code patching this IRQ handling routine anymore
>>> unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
>>> works (and how it is related to DW registers) and why this specific host
>>> controller needs handling that is not required by any other host
>>> controller relying on dw_handle_msi_irq().
>>
>> Unlike other DW PCIe controllers, TI implementation has a wrapper on top
>> of DW core. This wrapper latches the DW core level MSI and legacy
>> interrupts and then propagates it to GIC.
>> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI register is present in this TI
>> wrapper which aggregates all the MSI IRQs(PCIE_MSI_INTR0_STATUS) of DW
>> level. They are mapped on the MSI interrupt line of PCIe controller,
>> using a single status bit in the PCIECTRL_TI_CONF_IRQSTATUS_MSI register.
>>
>> So, the irq handler, dra7xx_pcie_msi_irq_handler(), first needs to look
>> at PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI[4] to know that its MSI IRQ and
>> then call dw_handle_msi_irq() to handle individual MSI vectors.
>> Driver has to make sure there are no pending vectors in DW core MSI
> 
> How can it make *sure* ? And what makes the wrapper latch MSI IRQs
> again ?
> 

This is the sequence that I got from discussion with internal HW team:
 1. read CONF_IRQSTATUS_MSI in wrapper and check if MSI bit
 2. clear CONF_IRQSTATUS_MSI
 3. read, clear and handle PCIE_MSI_INTR0_STATUS vectors
 4. repeat step 3 until PCIE_MSI_INTR0_STATUS reads 0

If read of PCIE_MSI_INTR0_STATUS returns 0 at least once, then its
guaranteed that the next time any vector is set in PCIE_MSI_INTR0_STATUS
register(due to MSI IRQ), wrapper will latch it and raise an IRQ to CPU.


>> status register before exiting handler. Otherwise next MSI IRQ will not
>> be latched by the wrapper.
> 
> I am sorry but I do not understand how this works - what is the
> condition that makes wrapper latch IRQs again ? This is at least
> racy, if not outright broken.
> 
> That count == 1000 is a symptom there is something broken on how this
> driver handles IRQs and I have the impression that we are applying
> plasters on top of plasters to make it less broken than it actually is.
> 

It is an upper bound on how many times driver looks at
PCIE_MSI_INTR0_STATUS register, so that there is no infinite looping
when the

Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-03-06 Thread Lorenzo Pieralisi
On Thu, Feb 15, 2018 at 09:59:21AM +0530, Vignesh R wrote:
> Hi,
> 
> On Monday 12 February 2018 11:28 PM, Lorenzo Pieralisi wrote:
> > On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
> >> We need to ensure that there are no pending MSI IRQ vector set (i.e
> >> PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
> >> dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
> >> register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
> >> pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
> >> returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.
> >> 
> >> This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
> >> 8260 used to throw following error and stall during ping/iperf3 tests.
> >> 
> >> [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.
> >> 
> >> Signed-off-by: Vignesh R 
> >> ---
> >>  drivers/pci/dwc/pci-dra7xx.c | 21 ++---
> >>  1 file changed, 18 insertions(+), 3 deletions(-)
> >> 
> >> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> >> index ed8558d638e5..3420cbf7b60a 100644
> >> --- a/drivers/pci/dwc/pci-dra7xx.c
> >> +++ b/drivers/pci/dwc/pci-dra7xx.c
> >> @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int 
> >> irq, void *arg)
> >>    struct dra7xx_pcie *dra7xx = arg;
> >>    struct dw_pcie *pci = dra7xx->pci;
> >>    struct pcie_port *pp = &pci->pp;
> >> + int count = 0;
> >>    unsigned long reg;
> >>    u32 virq, bit;
> >>  
> >>    reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
> >> + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
> >>  
> >>    switch (reg) {
> >>    case MSI:
> >> - dw_handle_msi_irq(pp);
> >> + /*
> >> +  * Need to make sure no MSI IRQs are pending before
> >> +  * exiting handler, else the wrapper will not catch new
> >> +  * IRQs. So loop around till dw_handle_msi_irq() returns
> >> +  * IRQ_NONE
> >> +  */
> >> + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
> >> + count++;
> >> +
> >> + if (count == 1000) {
> >> + dev_err(pci->dev, "too much work in msi irq\n");
> >> + dra7xx_pcie_writel(dra7xx,
> >> +    
> >> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
> >> +    reg);
> >> + return IRQ_HANDLED;
> > 
> > I am not merging any code patching this IRQ handling routine anymore
> > unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
> > works (and how it is related to DW registers) and why this specific host
> > controller needs handling that is not required by any other host
> > controller relying on dw_handle_msi_irq().
> 
> Unlike other DW PCIe controllers, TI implementation has a wrapper on top
> of DW core. This wrapper latches the DW core level MSI and legacy
> interrupts and then propagates it to GIC.
> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI register is present in this TI
> wrapper which aggregates all the MSI IRQs(PCIE_MSI_INTR0_STATUS) of DW
> level. They are mapped on the MSI interrupt line of PCIe controller,
> using a single status bit in the PCIECTRL_TI_CONF_IRQSTATUS_MSI register.
> 
> So, the irq handler, dra7xx_pcie_msi_irq_handler(), first needs to look
> at PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI[4] to know that its MSI IRQ and
> then call dw_handle_msi_irq() to handle individual MSI vectors.
> Driver has to make sure there are no pending vectors in DW core MSI

How can it make *sure* ? And what makes the wrapper latch MSI IRQs
again ?

> status register before exiting handler. Otherwise next MSI IRQ will not
> be latched by the wrapper.

I am sorry but I do not understand how this works - what is the
condition that makes wrapper latch IRQs again ? This is at least
racy, if not outright broken.

That count == 1000 is a symptom there is something broken on how this
driver handles IRQs and I have the impression that we are applying
plasters on top of plasters to make it less broken than it actually is.

> > I suspect there is a code design flaw with the way this host handles
> > IRQs and we are going to find it and fix it the way it should, not with
> > any plaster like this patch.
> > 
> 
> I agree there has been some churn wrt this wrapper level IRQ handler.
> But, that was because hardware documentation/TRM did not match
> actual behavior and so it took some time to understand how the
> hardware is working.

How does HW work :) ? Please explain in detail how this works in HW
then we will get to the code.

Thanks,
Lorenzo

> I have extensively tested this series on multiple problematic PCIe USB
> cards and PCIe WiFi cards over week long stress tests. And also had
> some agreement with internal hardware designers.  Hardware
> d

Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-03-01 Thread Lorenzo Pieralisi
On Thu, Mar 01, 2018 at 09:01:53PM +0530, Vignesh R wrote:
> Hi Lorenzo,
> 
> On 15-Feb-18 9:59 AM, Vignesh R wrote:
> > Hi,
> > 
> > On Monday 12 February 2018 11:28 PM, Lorenzo Pieralisi wrote:
> >> On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
> >>> We need to ensure that there are no pending MSI IRQ vector set (i.e
> >>> PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
> >>> dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
> >>> register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
> >>> pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
> >>> returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.
> >>>
> >>> This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
> >>> 8260 used to throw following error and stall during ping/iperf3 tests.
> >>>
> >>> [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.
> >>>
> >>> Signed-off-by: Vignesh R 
> >>> ---
> >>>   drivers/pci/dwc/pci-dra7xx.c | 21 ++---
> >>>   1 file changed, 18 insertions(+), 3 deletions(-)
> >>>
> >>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> >>> index ed8558d638e5..3420cbf7b60a 100644
> >>> --- a/drivers/pci/dwc/pci-dra7xx.c
> >>> +++ b/drivers/pci/dwc/pci-dra7xx.c
> >>> @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int 
> >>> irq, void *arg)
> >>>     struct dra7xx_pcie *dra7xx = arg;
> >>>     struct dw_pcie *pci = dra7xx->pci;
> >>>     struct pcie_port *pp = &pci->pp;
> >>> + int count = 0;
> >>>     unsigned long reg;
> >>>     u32 virq, bit;
> >>>   
> >>>     reg = dra7xx_pcie_readl(dra7xx, 
> >>> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
> >>> + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
> >>>   
> >>>     switch (reg) {
> >>>     case MSI:
> >>> - dw_handle_msi_irq(pp);
> >>> + /*
> >>> +  * Need to make sure no MSI IRQs are pending before
> >>> +  * exiting handler, else the wrapper will not catch new
> >>> +  * IRQs. So loop around till dw_handle_msi_irq() returns
> >>> +  * IRQ_NONE
> >>> +  */
> >>> + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
> >>> + count++;
> >>> +
> >>> + if (count == 1000) {
> >>> + dev_err(pci->dev, "too much work in msi irq\n");
> >>> + dra7xx_pcie_writel(dra7xx,
> >>> +    
> >>> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
> >>> +    reg);
> >>> + return IRQ_HANDLED;
> >>
> >> I am not merging any code patching this IRQ handling routine anymore
> >> unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
> >> works (and how it is related to DW registers) and why this specific host
> >> controller needs handling that is not required by any other host
> >> controller relying on dw_handle_msi_irq().
> > 
> > Unlike other DW PCIe controllers, TI implementation has a wrapper on top
> > of DW core. This wrapper latches the DW core level MSI and legacy
> > interrupts and then propagates it to GIC.
> > PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI register is present in this TI
> > wrapper which aggregates all the MSI IRQs(PCIE_MSI_INTR0_STATUS) of DW
> > level. They are mapped on the MSI interrupt line of PCIe controller,
> > using a single status bit in the PCIECTRL_TI_CONF_IRQSTATUS_MSI register.
> > 
> > So, the irq handler, dra7xx_pcie_msi_irq_handler(), first needs to look
> > at PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI[4] to know that its MSI IRQ and
> > then call dw_handle_msi_irq() to handle individual MSI vectors.
> > Driver has to make sure there are no pending vectors in DW core MSI
> > status register before exiting handler. Otherwise next MSI IRQ will not
> > be latched by the wrapper.
> > 
> > 
> 
> Did above explanation clarify CONF_IRQSTATUS_MSI register usage and the
> need for IRQ handler? Are you okay with this fix?

Hi Vignesh,

I will get back to it shortly, thanks for your patience.

Lorenzo

> Regards
> Vignesh
> 
> >>
> >> I suspect there is a code design flaw with the way this host handles
> >> IRQs and we are going to find it and fix it the way it should, not with
> >> any plaster like this patch.
> >>
> > 
> > I agree there has been some churn wrt this wrapper level IRQ handler.
> > But, that was because hardware documentation/TRM did not match
> > actual behavior and so it took some time to understand how the
> > hardware is working. I have extensively tested this series on multiple
> > problematic PCIe USB cards and PCIe WiFi cards over week long stress
> > tests. And also had some agreement with internal hardware designers.
> > Hardware documentations will also be updated.
> > 
> > 
> >> Lorenzo
> >>
> >>> + }
> >>>     break;
> >>>     case 

Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-03-01 Thread Vignesh R
Hi Lorenzo,

On 15-Feb-18 9:59 AM, Vignesh R wrote:
> Hi,
> 
> On Monday 12 February 2018 11:28 PM, Lorenzo Pieralisi wrote:
>> On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
>>> We need to ensure that there are no pending MSI IRQ vector set (i.e
>>> PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
>>> dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
>>> register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
>>> pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
>>> returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.
>>>
>>> This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
>>> 8260 used to throw following error and stall during ping/iperf3 tests.
>>>
>>> [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.
>>>
>>> Signed-off-by: Vignesh R 
>>> ---
>>>   drivers/pci/dwc/pci-dra7xx.c | 21 ++---
>>>   1 file changed, 18 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>>> index ed8558d638e5..3420cbf7b60a 100644
>>> --- a/drivers/pci/dwc/pci-dra7xx.c
>>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>>> @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int 
>>> irq, void *arg)
>>>     struct dra7xx_pcie *dra7xx = arg;
>>>     struct dw_pcie *pci = dra7xx->pci;
>>>     struct pcie_port *pp = &pci->pp;
>>> + int count = 0;
>>>     unsigned long reg;
>>>     u32 virq, bit;
>>>   
>>>     reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
>>> + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
>>>   
>>>     switch (reg) {
>>>     case MSI:
>>> - dw_handle_msi_irq(pp);
>>> + /*
>>> +  * Need to make sure no MSI IRQs are pending before
>>> +  * exiting handler, else the wrapper will not catch new
>>> +  * IRQs. So loop around till dw_handle_msi_irq() returns
>>> +  * IRQ_NONE
>>> +  */
>>> + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
>>> + count++;
>>> +
>>> + if (count == 1000) {
>>> + dev_err(pci->dev, "too much work in msi irq\n");
>>> + dra7xx_pcie_writel(dra7xx,
>>> +    PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
>>> +    reg);
>>> + return IRQ_HANDLED;
>>
>> I am not merging any code patching this IRQ handling routine anymore
>> unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
>> works (and how it is related to DW registers) and why this specific host
>> controller needs handling that is not required by any other host
>> controller relying on dw_handle_msi_irq().
> 
> Unlike other DW PCIe controllers, TI implementation has a wrapper on top
> of DW core. This wrapper latches the DW core level MSI and legacy
> interrupts and then propagates it to GIC.
> PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI register is present in this TI
> wrapper which aggregates all the MSI IRQs(PCIE_MSI_INTR0_STATUS) of DW
> level. They are mapped on the MSI interrupt line of PCIe controller,
> using a single status bit in the PCIECTRL_TI_CONF_IRQSTATUS_MSI register.
> 
> So, the irq handler, dra7xx_pcie_msi_irq_handler(), first needs to look
> at PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI[4] to know that its MSI IRQ and
> then call dw_handle_msi_irq() to handle individual MSI vectors.
> Driver has to make sure there are no pending vectors in DW core MSI
> status register before exiting handler. Otherwise next MSI IRQ will not
> be latched by the wrapper.
> 
> 

Did above explanation clarify CONF_IRQSTATUS_MSI register usage and the
need for IRQ handler? Are you okay with this fix?

Regards
Vignesh

>>
>> I suspect there is a code design flaw with the way this host handles
>> IRQs and we are going to find it and fix it the way it should, not with
>> any plaster like this patch.
>>
> 
> I agree there has been some churn wrt this wrapper level IRQ handler.
> But, that was because hardware documentation/TRM did not match
> actual behavior and so it took some time to understand how the
> hardware is working. I have extensively tested this series on multiple
> problematic PCIe USB cards and PCIe WiFi cards over week long stress
> tests. And also had some agreement with internal hardware designers.
> Hardware documentations will also be updated.
> 
> 
>> Lorenzo
>>
>>> + }
>>>     break;
>>>     case INTA:
>>>     case INTB:
>>> @@ -275,8 +292,6 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, 
>>> void *arg)
>>>     break;
>>>     }
>>>   
>>> - dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
>>> -
>>>     return IRQ_HANDLED;
>>>   }
>>>   
>>> -- 
>>> 2.16.1
>>>
> 


Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-02-14 Thread Vignesh R
Hi,

On Monday 12 February 2018 11:28 PM, Lorenzo Pieralisi wrote:
> On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
>> We need to ensure that there are no pending MSI IRQ vector set (i.e
>> PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
>> dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
>> register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
>> pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
>> returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.
>> 
>> This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
>> 8260 used to throw following error and stall during ping/iperf3 tests.
>> 
>> [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.
>> 
>> Signed-off-by: Vignesh R 
>> ---
>>  drivers/pci/dwc/pci-dra7xx.c | 21 ++---
>>  1 file changed, 18 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
>> index ed8558d638e5..3420cbf7b60a 100644
>> --- a/drivers/pci/dwc/pci-dra7xx.c
>> +++ b/drivers/pci/dwc/pci-dra7xx.c
>> @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int 
>> irq, void *arg)
>>    struct dra7xx_pcie *dra7xx = arg;
>>    struct dw_pcie *pci = dra7xx->pci;
>>    struct pcie_port *pp = &pci->pp;
>> + int count = 0;
>>    unsigned long reg;
>>    u32 virq, bit;
>>  
>>    reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
>> + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
>>  
>>    switch (reg) {
>>    case MSI:
>> - dw_handle_msi_irq(pp);
>> + /*
>> +  * Need to make sure no MSI IRQs are pending before
>> +  * exiting handler, else the wrapper will not catch new
>> +  * IRQs. So loop around till dw_handle_msi_irq() returns
>> +  * IRQ_NONE
>> +  */
>> + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
>> + count++;
>> +
>> + if (count == 1000) {
>> + dev_err(pci->dev, "too much work in msi irq\n");
>> + dra7xx_pcie_writel(dra7xx,
>> +    PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
>> +    reg);
>> + return IRQ_HANDLED;
> 
> I am not merging any code patching this IRQ handling routine anymore
> unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
> works (and how it is related to DW registers) and why this specific host
> controller needs handling that is not required by any other host
> controller relying on dw_handle_msi_irq().

Unlike other DW PCIe controllers, TI implementation has a wrapper on top
of DW core. This wrapper latches the DW core level MSI and legacy
interrupts and then propagates it to GIC.
PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI register is present in this TI
wrapper which aggregates all the MSI IRQs(PCIE_MSI_INTR0_STATUS) of DW
level. They are mapped on the MSI interrupt line of PCIe controller,
using a single status bit in the PCIECTRL_TI_CONF_IRQSTATUS_MSI register.

So, the irq handler, dra7xx_pcie_msi_irq_handler(), first needs to look
at PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI[4] to know that its MSI IRQ and
then call dw_handle_msi_irq() to handle individual MSI vectors.
Driver has to make sure there are no pending vectors in DW core MSI
status register before exiting handler. Otherwise next MSI IRQ will not
be latched by the wrapper.


> 
> I suspect there is a code design flaw with the way this host handles
> IRQs and we are going to find it and fix it the way it should, not with
> any plaster like this patch.
> 

I agree there has been some churn wrt this wrapper level IRQ handler.
But, that was because hardware documentation/TRM did not match
actual behavior and so it took some time to understand how the
hardware is working. I have extensively tested this series on multiple
problematic PCIe USB cards and PCIe WiFi cards over week long stress
tests. And also had some agreement with internal hardware designers.
Hardware documentations will also be updated.


> Lorenzo
> 
>> + }
>>    break;
>>    case INTA:
>>    case INTB:
>> @@ -275,8 +292,6 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, 
>> void *arg)
>>    break;
>>    }
>>  
>> - dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
>> -
>>    return IRQ_HANDLED;
>>  }
>>  
>> -- 
>> 2.16.1
>> 

-- 
Regards
Vignesh


Re: [PATCH 2/3] PCI: dwc: pci-dra7xx: Improve MSI IRQ handling

2018-02-12 Thread Lorenzo Pieralisi
On Fri, Feb 09, 2018 at 05:34:14PM +0530, Vignesh R wrote:
> We need to ensure that there are no pending MSI IRQ vector set (i.e
> PCIE_MSI_INTR0_STATUS reads 0 at least once) before exiting
> dra7xx_pcie_msi_irq_handler(). Else, the dra7xx PCIe wrapper will not
> register new MSI IRQs even though PCIE_MSI_INTR0_STATUS shows IRQs are
> pending. Therefore, keep calling dra7xx_pcie_msi_irq_handler() until it
> returns IRQ_NONE, which suggests that PCIE_MSI_INTR0_STATUS is 0.
> 
> This fixes a bug, where PCIe wifi cards with 4 DMA queues like Intel
> 8260 used to throw following error and stall during ping/iperf3 tests.
> 
> [   97.776310] iwlwifi :01:00.0: Queue 9 stuck for 2500 ms.
> 
> Signed-off-by: Vignesh R 
> ---
>  drivers/pci/dwc/pci-dra7xx.c | 21 ++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
> index ed8558d638e5..3420cbf7b60a 100644
> --- a/drivers/pci/dwc/pci-dra7xx.c
> +++ b/drivers/pci/dwc/pci-dra7xx.c
> @@ -254,14 +254,31 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, 
> void *arg)
>   struct dra7xx_pcie *dra7xx = arg;
>   struct dw_pcie *pci = dra7xx->pci;
>   struct pcie_port *pp = &pci->pp;
> + int count = 0;
>   unsigned long reg;
>   u32 virq, bit;
>  
>   reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI);
> + dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
>  
>   switch (reg) {
>   case MSI:
> - dw_handle_msi_irq(pp);
> + /*
> +  * Need to make sure no MSI IRQs are pending before
> +  * exiting handler, else the wrapper will not catch new
> +  * IRQs. So loop around till dw_handle_msi_irq() returns
> +  * IRQ_NONE
> +  */
> + while (dw_handle_msi_irq(pp) != IRQ_NONE && count < 1000)
> + count++;
> +
> + if (count == 1000) {
> + dev_err(pci->dev, "too much work in msi irq\n");
> + dra7xx_pcie_writel(dra7xx,
> +PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
> +reg);
> + return IRQ_HANDLED;

I am not merging any code patching this IRQ handling routine anymore
unless you thoroughly explain to me how this CONF_IRQSTATUS_MSI register
works (and how it is related to DW registers) and why this specific host
controller needs handling that is not required by any other host
controller relying on dw_handle_msi_irq().

I suspect there is a code design flaw with the way this host handles
IRQs and we are going to find it and fix it the way it should, not with
any plaster like this patch.

Lorenzo

> + }
>   break;
>   case INTA:
>   case INTB:
> @@ -275,8 +292,6 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, 
> void *arg)
>   break;
>   }
>  
> - dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI, reg);
> -
>   return IRQ_HANDLED;
>  }
>  
> -- 
> 2.16.1
>