Re: [PATCH 3/6] ARM: dts: sunxi: h3/h5: Add MBUS controller node
On Thu, Sep 12, 2019 at 10:46:58PM +0200, Jernej Škrabec wrote:
> Dne četrtek, 12. september 2019 ob 22:34:27 CEST je Maxime Ripard napisal(a):
> > On Thu, Sep 12, 2019 at 10:28:37PM +0200, Jernej Škrabec wrote:
> > > Dne četrtek, 12. september 2019 ob 22:20:57 CEST je Maxime Ripard
> napisal(a):
> > > > Hi,
> > > >
> > > > On Thu, Sep 12, 2019 at 07:51:29PM +0200, Jernej Skrabec wrote:
> > > > > Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to
> > > > > access system memory.
> > > > >
> > > > > MBUS controller is responsible for arbitration between channels based
> > > > > on set priority and can do some other things as well, like report
> > > > > bandwidth used. It also maps RAM region to different address than CPU.
> > > > >
> > > > > Signed-off-by: Jernej Skrabec
> > > > > ---
> > > > >
> > > > > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +
> > > > > 1 file changed, 9 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > > > b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..ef1d03812636
> > > > > 100644
> > > > > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > > > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > > > @@ -109,6 +109,7 @@
> > > > >
> > > > > compatible = "simple-bus";
> > > > > #address-cells = <1>;
> > > > > #size-cells = <1>;
> > > > >
> > > > > + dma-ranges;
> > > > >
> > > > > ranges;
> > > > >
> > > > > display_clocks: clock@100 {
> > > > >
> > > > > @@ -538,6 +539,14 @@
> > > > >
> > > > > };
> > > > >
> > > > > };
> > > > >
> > > > > + mbus: dram-controller@1c62000 {
> > > > > + compatible = "allwinner,sun8i-h3-mbus";
> > > > > + reg = <0x01c62000 0x1000>;
> > > > > + clocks = <&ccu 113>;
> > > > > + dma-ranges = <0x 0x4000
> > >
> > > 0xc000>;
> > >
> > > > > + #interconnect-cells = <1>;
> > > > > + };
> > > > > +
> > > >
> > > > If that's easy enough to access, can you also add the references in
> > > > the devices that are already there? (CSI and DE comes to my mind, but
> > > > there might be others).
> > >
> > > Strangely, DE2 doesn't use this offset. That was tested on OrangePi
> > > Plus2E,
> > > which has 2 GiB of RAM and subtracting this offset causes corrupted image.
> >
> > Ok, weird. But if it was tested then fine by me :)
> >
> > > But I can add this properties to CSI too. However, wouldn't that need CSI
> > > DT binding expansion with those properties? othetwise DT check will fail.
> > Oh right, we definitely need to update the binding indeed. The code
> > should be able to cope with both cases already.
>
> I guess it's better to handle that with another patch series then? Changing
> CSI bindings doesn't fit here.
Yeah, you can do it in a separate series if you prefer
Maxime
Re: [PATCH 3/6] ARM: dts: sunxi: h3/h5: Add MBUS controller node
Dne četrtek, 12. september 2019 ob 22:34:27 CEST je Maxime Ripard napisal(a):
> On Thu, Sep 12, 2019 at 10:28:37PM +0200, Jernej Škrabec wrote:
> > Dne četrtek, 12. september 2019 ob 22:20:57 CEST je Maxime Ripard
napisal(a):
> > > Hi,
> > >
> > > On Thu, Sep 12, 2019 at 07:51:29PM +0200, Jernej Skrabec wrote:
> > > > Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to
> > > > access system memory.
> > > >
> > > > MBUS controller is responsible for arbitration between channels based
> > > > on set priority and can do some other things as well, like report
> > > > bandwidth used. It also maps RAM region to different address than CPU.
> > > >
> > > > Signed-off-by: Jernej Skrabec
> > > > ---
> > > >
> > > > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +
> > > > 1 file changed, 9 insertions(+)
> > > >
> > > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > > b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..ef1d03812636
> > > > 100644
> > > > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > > @@ -109,6 +109,7 @@
> > > >
> > > > compatible = "simple-bus";
> > > > #address-cells = <1>;
> > > > #size-cells = <1>;
> > > >
> > > > + dma-ranges;
> > > >
> > > > ranges;
> > > >
> > > > display_clocks: clock@100 {
> > > >
> > > > @@ -538,6 +539,14 @@
> > > >
> > > > };
> > > >
> > > > };
> > > >
> > > > + mbus: dram-controller@1c62000 {
> > > > + compatible = "allwinner,sun8i-h3-mbus";
> > > > + reg = <0x01c62000 0x1000>;
> > > > + clocks = <&ccu 113>;
> > > > + dma-ranges = <0x 0x4000
> >
> > 0xc000>;
> >
> > > > + #interconnect-cells = <1>;
> > > > + };
> > > > +
> > >
> > > If that's easy enough to access, can you also add the references in
> > > the devices that are already there? (CSI and DE comes to my mind, but
> > > there might be others).
> >
> > Strangely, DE2 doesn't use this offset. That was tested on OrangePi
> > Plus2E,
> > which has 2 GiB of RAM and subtracting this offset causes corrupted image.
>
> Ok, weird. But if it was tested then fine by me :)
>
> > But I can add this properties to CSI too. However, wouldn't that need CSI
> > DT binding expansion with those properties? othetwise DT check will fail.
> Oh right, we definitely need to update the binding indeed. The code
> should be able to cope with both cases already.
I guess it's better to handle that with another patch series then? Changing
CSI bindings doesn't fit here.
Best regards,
Jernej
Re: [PATCH 3/6] ARM: dts: sunxi: h3/h5: Add MBUS controller node
On Thu, Sep 12, 2019 at 10:28:37PM +0200, Jernej Škrabec wrote:
> Dne četrtek, 12. september 2019 ob 22:20:57 CEST je Maxime Ripard napisal(a):
> > Hi,
> >
> > On Thu, Sep 12, 2019 at 07:51:29PM +0200, Jernej Skrabec wrote:
> > > Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to
> > > access system memory.
> > >
> > > MBUS controller is responsible for arbitration between channels based
> > > on set priority and can do some other things as well, like report
> > > bandwidth used. It also maps RAM region to different address than CPU.
> > >
> > > Signed-off-by: Jernej Skrabec
> > > ---
> > >
> > > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +
> > > 1 file changed, 9 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..ef1d03812636
> > > 100644
> > > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > > @@ -109,6 +109,7 @@
> > >
> > > compatible = "simple-bus";
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > >
> > > + dma-ranges;
> > >
> > > ranges;
> > >
> > > display_clocks: clock@100 {
> > >
> > > @@ -538,6 +539,14 @@
> > >
> > > };
> > >
> > > };
> > >
> > > + mbus: dram-controller@1c62000 {
> > > + compatible = "allwinner,sun8i-h3-mbus";
> > > + reg = <0x01c62000 0x1000>;
> > > + clocks = <&ccu 113>;
> > > + dma-ranges = <0x 0x4000
> 0xc000>;
> > > + #interconnect-cells = <1>;
> > > + };
> > > +
> >
> > If that's easy enough to access, can you also add the references in
> > the devices that are already there? (CSI and DE comes to my mind, but
> > there might be others).
>
> Strangely, DE2 doesn't use this offset. That was tested on OrangePi Plus2E,
> which has 2 GiB of RAM and subtracting this offset causes corrupted image.
Ok, weird. But if it was tested then fine by me :)
> But I can add this properties to CSI too. However, wouldn't that need CSI DT
> binding expansion with those properties? othetwise DT check will fail.
Oh right, we definitely need to update the binding indeed. The code
should be able to cope with both cases already.
Maxime
Re: [PATCH 3/6] ARM: dts: sunxi: h3/h5: Add MBUS controller node
Dne četrtek, 12. september 2019 ob 22:20:57 CEST je Maxime Ripard napisal(a):
> Hi,
>
> On Thu, Sep 12, 2019 at 07:51:29PM +0200, Jernej Skrabec wrote:
> > Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to
> > access system memory.
> >
> > MBUS controller is responsible for arbitration between channels based
> > on set priority and can do some other things as well, like report
> > bandwidth used. It also maps RAM region to different address than CPU.
> >
> > Signed-off-by: Jernej Skrabec
> > ---
> >
> > arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..ef1d03812636
> > 100644
> > --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> > @@ -109,6 +109,7 @@
> >
> > compatible = "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> >
> > + dma-ranges;
> >
> > ranges;
> >
> > display_clocks: clock@100 {
> >
> > @@ -538,6 +539,14 @@
> >
> > };
> >
> > };
> >
> > + mbus: dram-controller@1c62000 {
> > + compatible = "allwinner,sun8i-h3-mbus";
> > + reg = <0x01c62000 0x1000>;
> > + clocks = <&ccu 113>;
> > + dma-ranges = <0x 0x4000
0xc000>;
> > + #interconnect-cells = <1>;
> > + };
> > +
>
> If that's easy enough to access, can you also add the references in
> the devices that are already there? (CSI and DE comes to my mind, but
> there might be others).
Strangely, DE2 doesn't use this offset. That was tested on OrangePi Plus2E,
which has 2 GiB of RAM and subtracting this offset causes corrupted image.
But I can add this properties to CSI too. However, wouldn't that need CSI DT
binding expansion with those properties? othetwise DT check will fail.
Best regards,
Jernej
>
> Thanks!
> Maxime
Re: [PATCH 3/6] ARM: dts: sunxi: h3/h5: Add MBUS controller node
Hi,
On Thu, Sep 12, 2019 at 07:51:29PM +0200, Jernej Skrabec wrote:
> Both, H3 and H5, contain MBUS, which is the bus used by DMA devices to
> access system memory.
>
> MBUS controller is responsible for arbitration between channels based
> on set priority and can do some other things as well, like report
> bandwidth used. It also maps RAM region to different address than CPU.
>
> Signed-off-by: Jernej Skrabec
> ---
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index eba190b3f9de..ef1d03812636 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -109,6 +109,7 @@
> compatible = "simple-bus";
> #address-cells = <1>;
> #size-cells = <1>;
> + dma-ranges;
> ranges;
>
> display_clocks: clock@100 {
> @@ -538,6 +539,14 @@
> };
> };
>
> + mbus: dram-controller@1c62000 {
> + compatible = "allwinner,sun8i-h3-mbus";
> + reg = <0x01c62000 0x1000>;
> + clocks = <&ccu 113>;
> + dma-ranges = <0x 0x4000 0xc000>;
> + #interconnect-cells = <1>;
> + };
> +
If that's easy enough to access, can you also add the references in
the devices that are already there? (CSI and DE comes to my mind, but
there might be others).
Thanks!
Maxime
