Re: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation
On Wed, Jun 8, 2016 at 4:41 AM, Maxime Ripardwrote: > Introduce a new binding with its documentation for the brand new clock > sub-framework. > > Signed-off-by: Maxime Ripard > --- > Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 + > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt > > diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > new file mode 100644 > index ..2c66046a1342 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > @@ -0,0 +1,17 @@ > +Allwinner Clock Control Unit Binding > + > + > +Required properties : > +- compatible: must contain one of the following compatible: > + - "allwinner,sun8i-h3-ccu" > + > +- reg: Must contain the registers base address and length > +- clocks: phandle to the oscillators feeding the SPI controller. Two are SPI? copy paste error? > + needed: > + - "hosc": the high frequency oscillator (usually at 24MHz) > + - "losc": the low frequency oscillator (usually at 32kHz) > +- clock-names: Must contain the clock names described just above > +- #clock-cells : must contain 1 > +- #reset-cells : must contain 1 > + > +Example: No example? Maybe just remove this section then. ChenYu > -- > 2.8.3 >
Re: [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation
On Wed, Jun 8, 2016 at 4:41 AM, Maxime Ripard wrote: > Introduce a new binding with its documentation for the brand new clock > sub-framework. > > Signed-off-by: Maxime Ripard > --- > Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 + > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt > > diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > new file mode 100644 > index ..2c66046a1342 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > @@ -0,0 +1,17 @@ > +Allwinner Clock Control Unit Binding > + > + > +Required properties : > +- compatible: must contain one of the following compatible: > + - "allwinner,sun8i-h3-ccu" > + > +- reg: Must contain the registers base address and length > +- clocks: phandle to the oscillators feeding the SPI controller. Two are SPI? copy paste error? > + needed: > + - "hosc": the high frequency oscillator (usually at 24MHz) > + - "losc": the low frequency oscillator (usually at 32kHz) > +- clock-names: Must contain the clock names described just above > +- #clock-cells : must contain 1 > +- #reset-cells : must contain 1 > + > +Example: No example? Maybe just remove this section then. ChenYu > -- > 2.8.3 >