Re: [RFC PATCH 0/7] AXP803 AC/Battery support
Hi Icenowy, On 24/09/2017 16:36, Jonathan Cameron wrote: > On Thu, 21 Sep 2017 23:20:11 +0800 > Icenowy Zhengwrote: > >> 于 2017年9月21日 GMT+08:00 下午10:46:21, Jonathan Cameron >> 写到: >>> On Wed, 20 Sep 2017 23:18:07 +0800 >>> Icenowy Zheng wrote: >>> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power >>> inputs: AC, USB and Battery. This patchset adds support for the AC and Battery supplies, which is >>> useful for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, >>> Pinebook). The USB supply is not yet supported in this patchset because it's not present on Pine series boards. In order to enable battery monitoring the ADC for battery is also >>> enabled for AXs. In order to enable battery monitoring the ADC for battery is also >>> enabled for AXP803. >>> >>> I'll go with the obvious question... >>> >>> Why an RFC rather than a standard patch submission? I'm not immediately >>> seeing what is controversial! >> >> Oh I am just not confident about this patchset, >> especially the IIO part. > > It all looks fine to me. I would imagine that, once everyone is > happy, this will go through the mfd tree, but Lee may have other ideas! > Small modifications to make but I definitely agree with Jonathan that you did not need to send an RFC. Quentin > Jonathan >> >>> >>> Jonathan >>> Icenowy Zheng (7): dt-bindings: add compatibles for AXP803 Battery/USB power supplies iio: adc: axp20x-adc: allow to skip ADC rate setup now iio: adc: axp20x-adc: add support for AXP803 power: supply: axp20x-battery: support AXP803 mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery arm64: allwinner: a64: add power supply nodes in AXP803 DTSI arm64: allwinner: a64: enable AC and Battery for Pine64 .../bindings/power/supply/axp20x_battery.txt | 1 + .../bindings/power/supply/axp20x_usb_power.txt | 1 + arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ drivers/iio/adc/axp20x_adc.c | 114 >>> - drivers/mfd/axp20x.c | 11 ++ drivers/power/supply/axp20x_battery.c | 88 >>> ++-- 7 files changed, 226 insertions(+), 12 deletions(-) >>> >>> >>> ___ >>> linux-arm-kernel mailing list >>> linux-arm-ker...@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-iio" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > ___ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Quentin Schulz, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
Hi Icenowy, On 24/09/2017 16:36, Jonathan Cameron wrote: > On Thu, 21 Sep 2017 23:20:11 +0800 > Icenowy Zheng wrote: > >> 于 2017年9月21日 GMT+08:00 下午10:46:21, Jonathan Cameron >> 写到: >>> On Wed, 20 Sep 2017 23:18:07 +0800 >>> Icenowy Zheng wrote: >>> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power >>> inputs: AC, USB and Battery. This patchset adds support for the AC and Battery supplies, which is >>> useful for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, >>> Pinebook). The USB supply is not yet supported in this patchset because it's not present on Pine series boards. In order to enable battery monitoring the ADC for battery is also >>> enabled for AXs. In order to enable battery monitoring the ADC for battery is also >>> enabled for AXP803. >>> >>> I'll go with the obvious question... >>> >>> Why an RFC rather than a standard patch submission? I'm not immediately >>> seeing what is controversial! >> >> Oh I am just not confident about this patchset, >> especially the IIO part. > > It all looks fine to me. I would imagine that, once everyone is > happy, this will go through the mfd tree, but Lee may have other ideas! > Small modifications to make but I definitely agree with Jonathan that you did not need to send an RFC. Quentin > Jonathan >> >>> >>> Jonathan >>> Icenowy Zheng (7): dt-bindings: add compatibles for AXP803 Battery/USB power supplies iio: adc: axp20x-adc: allow to skip ADC rate setup now iio: adc: axp20x-adc: add support for AXP803 power: supply: axp20x-battery: support AXP803 mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery arm64: allwinner: a64: add power supply nodes in AXP803 DTSI arm64: allwinner: a64: enable AC and Battery for Pine64 .../bindings/power/supply/axp20x_battery.txt | 1 + .../bindings/power/supply/axp20x_usb_power.txt | 1 + arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ drivers/iio/adc/axp20x_adc.c | 114 >>> - drivers/mfd/axp20x.c | 11 ++ drivers/power/supply/axp20x_battery.c | 88 >>> ++-- 7 files changed, 226 insertions(+), 12 deletions(-) >>> >>> >>> ___ >>> linux-arm-kernel mailing list >>> linux-arm-ker...@lists.infradead.org >>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-iio" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > ___ > linux-arm-kernel mailing list > linux-arm-ker...@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- Quentin Schulz, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
On Thu, 21 Sep 2017 23:20:11 +0800 Icenowy Zhengwrote: > 于 2017年9月21日 GMT+08:00 下午10:46:21, Jonathan Cameron > 写到: > >On Wed, 20 Sep 2017 23:18:07 +0800 > >Icenowy Zheng wrote: > > > >> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power > >inputs: > >> AC, USB and Battery. > >> > >> This patchset adds support for the AC and Battery supplies, which is > >useful > >> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, > >Pinebook). > >> > >> The USB supply is not yet supported in this patchset because it's not > >> present on Pine series boards. > >> > >> In order to enable battery monitoring the ADC for battery is also > >enabled > >> for AXs. > >> > >> In order to enable battery monitoring the ADC for battery is also > >enabled > >> for AXP803. > > > >I'll go with the obvious question... > > > >Why an RFC rather than a standard patch submission? I'm not immediately > >seeing what is controversial! > > Oh I am just not confident about this patchset, > especially the IIO part. It all looks fine to me. I would imagine that, once everyone is happy, this will go through the mfd tree, but Lee may have other ideas! Jonathan > > > > >Jonathan > > > >> > >> Icenowy Zheng (7): > >> dt-bindings: add compatibles for AXP803 Battery/USB power supplies > >> iio: adc: axp20x-adc: allow to skip ADC rate setup now > >> iio: adc: axp20x-adc: add support for AXP803 > >> power: supply: axp20x-battery: support AXP803 > >> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery > >> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI > >> arm64: allwinner: a64: enable AC and Battery for Pine64 > >> > >> .../bindings/power/supply/axp20x_battery.txt | 1 + > >> .../bindings/power/supply/axp20x_usb_power.txt | 1 + > >> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ > >> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ > >> drivers/iio/adc/axp20x_adc.c | 114 > >- > >> drivers/mfd/axp20x.c | 11 ++ > >> drivers/power/supply/axp20x_battery.c | 88 > >++-- > >> 7 files changed, 226 insertions(+), 12 deletions(-) > >> > > > > > >___ > >linux-arm-kernel mailing list > >linux-arm-ker...@lists.infradead.org > >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
On Thu, 21 Sep 2017 23:20:11 +0800 Icenowy Zheng wrote: > 于 2017年9月21日 GMT+08:00 下午10:46:21, Jonathan Cameron > 写到: > >On Wed, 20 Sep 2017 23:18:07 +0800 > >Icenowy Zheng wrote: > > > >> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power > >inputs: > >> AC, USB and Battery. > >> > >> This patchset adds support for the AC and Battery supplies, which is > >useful > >> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, > >Pinebook). > >> > >> The USB supply is not yet supported in this patchset because it's not > >> present on Pine series boards. > >> > >> In order to enable battery monitoring the ADC for battery is also > >enabled > >> for AXs. > >> > >> In order to enable battery monitoring the ADC for battery is also > >enabled > >> for AXP803. > > > >I'll go with the obvious question... > > > >Why an RFC rather than a standard patch submission? I'm not immediately > >seeing what is controversial! > > Oh I am just not confident about this patchset, > especially the IIO part. It all looks fine to me. I would imagine that, once everyone is happy, this will go through the mfd tree, but Lee may have other ideas! Jonathan > > > > >Jonathan > > > >> > >> Icenowy Zheng (7): > >> dt-bindings: add compatibles for AXP803 Battery/USB power supplies > >> iio: adc: axp20x-adc: allow to skip ADC rate setup now > >> iio: adc: axp20x-adc: add support for AXP803 > >> power: supply: axp20x-battery: support AXP803 > >> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery > >> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI > >> arm64: allwinner: a64: enable AC and Battery for Pine64 > >> > >> .../bindings/power/supply/axp20x_battery.txt | 1 + > >> .../bindings/power/supply/axp20x_usb_power.txt | 1 + > >> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ > >> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ > >> drivers/iio/adc/axp20x_adc.c | 114 > >- > >> drivers/mfd/axp20x.c | 11 ++ > >> drivers/power/supply/axp20x_battery.c | 88 > >++-- > >> 7 files changed, 226 insertions(+), 12 deletions(-) > >> > > > > > >___ > >linux-arm-kernel mailing list > >linux-arm-ker...@lists.infradead.org > >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
于 2017年9月21日 GMT+08:00 下午10:46:21, Jonathan Cameron写到: >On Wed, 20 Sep 2017 23:18:07 +0800 >Icenowy Zheng wrote: > >> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power >inputs: >> AC, USB and Battery. >> >> This patchset adds support for the AC and Battery supplies, which is >useful >> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, >Pinebook). >> >> The USB supply is not yet supported in this patchset because it's not >> present on Pine series boards. >> >> In order to enable battery monitoring the ADC for battery is also >enabled >> for AXs. >> >> In order to enable battery monitoring the ADC for battery is also >enabled >> for AXP803. > >I'll go with the obvious question... > >Why an RFC rather than a standard patch submission? I'm not immediately >seeing what is controversial! Oh I am just not confident about this patchset, especially the IIO part. > >Jonathan > >> >> Icenowy Zheng (7): >> dt-bindings: add compatibles for AXP803 Battery/USB power supplies >> iio: adc: axp20x-adc: allow to skip ADC rate setup now >> iio: adc: axp20x-adc: add support for AXP803 >> power: supply: axp20x-battery: support AXP803 >> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery >> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI >> arm64: allwinner: a64: enable AC and Battery for Pine64 >> >> .../bindings/power/supply/axp20x_battery.txt | 1 + >> .../bindings/power/supply/axp20x_usb_power.txt | 1 + >> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ >> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ >> drivers/iio/adc/axp20x_adc.c | 114 >- >> drivers/mfd/axp20x.c | 11 ++ >> drivers/power/supply/axp20x_battery.c | 88 >++-- >> 7 files changed, 226 insertions(+), 12 deletions(-) >> > > >___ >linux-arm-kernel mailing list >linux-arm-ker...@lists.infradead.org >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
于 2017年9月21日 GMT+08:00 下午10:46:21, Jonathan Cameron 写到: >On Wed, 20 Sep 2017 23:18:07 +0800 >Icenowy Zheng wrote: > >> The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power >inputs: >> AC, USB and Battery. >> >> This patchset adds support for the AC and Battery supplies, which is >useful >> for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, >Pinebook). >> >> The USB supply is not yet supported in this patchset because it's not >> present on Pine series boards. >> >> In order to enable battery monitoring the ADC for battery is also >enabled >> for AXs. >> >> In order to enable battery monitoring the ADC for battery is also >enabled >> for AXP803. > >I'll go with the obvious question... > >Why an RFC rather than a standard patch submission? I'm not immediately >seeing what is controversial! Oh I am just not confident about this patchset, especially the IIO part. > >Jonathan > >> >> Icenowy Zheng (7): >> dt-bindings: add compatibles for AXP803 Battery/USB power supplies >> iio: adc: axp20x-adc: allow to skip ADC rate setup now >> iio: adc: axp20x-adc: add support for AXP803 >> power: supply: axp20x-battery: support AXP803 >> mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery >> arm64: allwinner: a64: add power supply nodes in AXP803 DTSI >> arm64: allwinner: a64: enable AC and Battery for Pine64 >> >> .../bindings/power/supply/axp20x_battery.txt | 1 + >> .../bindings/power/supply/axp20x_usb_power.txt | 1 + >> arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ >> .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ >> drivers/iio/adc/axp20x_adc.c | 114 >- >> drivers/mfd/axp20x.c | 11 ++ >> drivers/power/supply/axp20x_battery.c | 88 >++-- >> 7 files changed, 226 insertions(+), 12 deletions(-) >> > > >___ >linux-arm-kernel mailing list >linux-arm-ker...@lists.infradead.org >http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
On Wed, 20 Sep 2017 23:18:07 +0800 Icenowy Zhengwrote: > The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power inputs: > AC, USB and Battery. > > This patchset adds support for the AC and Battery supplies, which is useful > for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, Pinebook). > > The USB supply is not yet supported in this patchset because it's not > present on Pine series boards. > > In order to enable battery monitoring the ADC for battery is also enabled > for AXs. > > In order to enable battery monitoring the ADC for battery is also enabled > for AXP803. I'll go with the obvious question... Why an RFC rather than a standard patch submission? I'm not immediately seeing what is controversial! Jonathan > > Icenowy Zheng (7): > dt-bindings: add compatibles for AXP803 Battery/USB power supplies > iio: adc: axp20x-adc: allow to skip ADC rate setup now > iio: adc: axp20x-adc: add support for AXP803 > power: supply: axp20x-battery: support AXP803 > mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery > arm64: allwinner: a64: add power supply nodes in AXP803 DTSI > arm64: allwinner: a64: enable AC and Battery for Pine64 > > .../bindings/power/supply/axp20x_battery.txt | 1 + > .../bindings/power/supply/axp20x_usb_power.txt | 1 + > arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ > .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ > drivers/iio/adc/axp20x_adc.c | 114 > - > drivers/mfd/axp20x.c | 11 ++ > drivers/power/supply/axp20x_battery.c | 88 ++-- > 7 files changed, 226 insertions(+), 12 deletions(-) >
Re: [RFC PATCH 0/7] AXP803 AC/Battery support
On Wed, 20 Sep 2017 23:18:07 +0800 Icenowy Zheng wrote: > The AXP803 PMIC, used by most Allwinner A64 boards, features 3 power inputs: > AC, USB and Battery. > > This patchset adds support for the AC and Battery supplies, which is useful > for the boards from Pine64 (Pine64, SoPine w/ baseboard model A, Pinebook). > > The USB supply is not yet supported in this patchset because it's not > present on Pine series boards. > > In order to enable battery monitoring the ADC for battery is also enabled > for AXs. > > In order to enable battery monitoring the ADC for battery is also enabled > for AXP803. I'll go with the obvious question... Why an RFC rather than a standard patch submission? I'm not immediately seeing what is controversial! Jonathan > > Icenowy Zheng (7): > dt-bindings: add compatibles for AXP803 Battery/USB power supplies > iio: adc: axp20x-adc: allow to skip ADC rate setup now > iio: adc: axp20x-adc: add support for AXP803 > power: supply: axp20x-battery: support AXP803 > mfd: axp20x: add cells for AXP803 ADC/AC Power/Battery > arm64: allwinner: a64: add power supply nodes in AXP803 DTSI > arm64: allwinner: a64: enable AC and Battery for Pine64 > > .../bindings/power/supply/axp20x_battery.txt | 1 + > .../bindings/power/supply/axp20x_usb_power.txt | 1 + > arch/arm64/boot/dts/allwinner/axp803.dtsi | 15 +++ > .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++ > drivers/iio/adc/axp20x_adc.c | 114 > - > drivers/mfd/axp20x.c | 11 ++ > drivers/power/supply/axp20x_battery.c | 88 ++-- > 7 files changed, 226 insertions(+), 12 deletions(-) >