Re: [linux-lvm] LVM2 Metadata structure, extents ordering, metadata corruptions
Hello Zdenek Thank you for the explanation May I kindly ask you what/which is the command line API to access and manipulate those metadata? And when you say vi editor, do you kindly mean direct edit of HEX values on the raw metadata? Thank you If you kindly may have some link to some documentation, thank you even more Though here it is not the configuration that got lost Also, additional info, we now got that all the cases do have active the thin-provisionin and looks like that these are additional/different metadata tables So if these got messed/corrupted... In QNAP looks they have made some customization and so thin-provision LVM metadata are on a dedicated partition we observed the HEX inside there and got partially the logic About thin-provisioning, again, any "fsck"-like is available? (I suppose no, but just as confirmation) Thank you R. Il giorno 29 set 2022, 12:52, alle ore 12:52, Zdenek Kabelac ha scritto: >Dne 27. 09. 22 v 12:10 Roberto Fastec napsal(a): >> Dear friends of the LVM mailing list >> >> I suppose this question is for some real LVM2 guru or even developer >> >> Here I kindly make three question with three premises >> >> premises >> 1. I'm a total noob about LVM2 low level logic, so I'm sorry of the >questions >> will sound silly :-) >> 2. The following applies to a whole md RAID (in my example it will be >a RAID5 >> made of 4 drives 1TB each so useful available space more or less >2.7TB) >> 3. I assign whole those 2.7TB to one single PV and one single VG and >one >> single LV. >> >> questions >> 1. Given the premise 3. The corresponding LVM2 metadata/tables are >and will be >> just a (allow me the term) "grid" "mapping that space" in an ordered >sequence >> to in the subsequent use (and filling) of the RAID space "just mark" >the used >> ones and the free ones? Or those grid cells will/could be in a messed >order ? >> And explicitly I mean. In case of metadata corruption (always with >respect of >> premise 3.) , could we just generate a dummy metadata table with all >the >> extents marked as "used" in such a way that we can anyway access them >> And can we expect to have them ordered? > >lvm2 'metadata handling' is purely internal to the lvm2 codebase - >you can't >rely on any 'witnessed/observed' logic. > >There is cmdline API to access and manipulate metadata in most cases. > >Temporarily you can i.e. update/modify your current metadata with 'vi' >editor >and vgcfgrestore them - however this is not a 'guaranteed' operational >mode - >rather a workaround if the 'cmdline' interface is not handling some >error case >well - and it should be used as RFE to enhance lvm2 in such case. > >> >> 2. Does it exist a sort of "fsck" for the LVM2 metadata ? We do >technical >> assistance and recently, specifically with those NAS devices that >make use of > >In general - lvm2 metadata on disk always do have CRC32 checksum - >when >invalid -> metadata is garbage. > >Each loaded CRC32 correct metadata is always then fully validated - yep >it can >be sometimes a bit costly in the case of very large metadata size - but >so far >- no big problems - CPUs are mostly getting faster as well... so >bigger >setups tends to have also powerful hw > >> LVM2, we have experienced really easy metadata corruption in >occurence of just >> nothing or because of a electric power interruption (which is really >> astonishing). We mean no drives failures , no bad SMARTs . Just >corruption >> from "nowhere" and "nocause" > > >Corrupted metadata are always considered unusable - user has to restore >to >previous valid version (and here sometimes all the combinations of >error might >eventually require 'vi editor' assistance - but again - in very very >unusual >circumstances. > >Metadata are archived in /etc/lvm/archive and they are also in >ring-buffer >present on all PVs in a VG - if there are too many PVs - user can >'opt-out' >and consider only a subset of PVs to hold metadata - i.e. 200PVs - and >only >20PVs holding metadata - but these are highly unusual configurations... > >Regards > > >Zdenek ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Re: [linux-lvm] LVM2 Metadata structure, extents ordering, metadata corruptions
Thank you for all the details and for your kind replies I will have a look to the utilities you kindly pointed out Kind regards Il giorno 29 set 2022, 13:41, alle ore 13:41, Zdenek Kabelac ha scritto: >Dne 29. 09. 22 v 13:15 Roberto Fastec napsal(a): >> Hello Zdenek >> Thank you for the explanation >> >> May I kindly ask you what/which is the command line API to access and > >> manipulate those metadata? >> > >'command line API' in the mean of: > >To create LV -- 'lvcreate' >To remove LV -- 'lvremove' > > >Note - many command can actually work without physical interaction with >DM >layer (--driverloaded n) - however in some case some targets require >presence >of DM. > >lvm2 commands are the way how to change your metadata properly. > > >> And when you say vi editor, do you kindly mean direct edit of HEX >values on >> the raw metadata? > >No way - you can't change metadata on disk - unless you would be >basically >precisely copying what lvm2 command does - so what would be the point >?? > >Simply use lvm2 command to make the job. Unless I'm missing some >important >point why would you need to work with lvm2 metadata but without lvm2 >?? > > >> >> Thank you >> >> If you kindly may have some link to some documentation, thank you >even more >> >> Though here it is not the configuration that got lost > >Well yeah - it will take some time - but i.e. RHEL storage >documentation might >be a good way to go through it. > > > >> Also, additional info, we now got that all the cases do have active >the >> thin-provisionin and looks like that these are additional/different >metadata >> tables > >This-provisioning is handled by LVM2 only to provide LVs for metadata >and >data LVs - and then the thinLVs to a user. > >Physical block layout for thin-provisioning is fully stored inside >thin-pool's metadata device. > >To explore those mappings you need to use tools like 'thin_dump', >'thin_ls' > >> >> So if these got messed/corrupted... >> > >If these thin-pool metadata get corrupted, there is tool: >'thin_repair'. > >Note: corruption of some high-level bTree nodes may result a severe >damage to >whole metadata structure -> i.e. lots of thinLVs being lost. > >It's a good idea to keep such metadata on some resilient type of >storage >(raid) and of course rule #1 - create regular backups of your thin >volumes... (snapshot of thinLV is not a backup!). > > >> In QNAP looks they have made some customization and so thin-provision >LVM >> metadata are on a dedicated partition >> >> we observed the HEX inside there and got partially the logic >> >> About thin-provisioning, again, any "fsck"-like is available? (I >suppose no, >> but just as confirmation) > >This tool is called 'thin_check' > >(and this tool is in fact executed with every thin-pool activation & >deactivation by default by lvm2) > >Note: just like with lvm2 metadata - also thin-pool's kernel metadata >are >check-summed (protected agains disc bit corruptions), so again zero >chance >with any 'hex-editor' to manipulate them - unless you would 'recreate' >thin-pool engine... > > >Regards > >Zdenek ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Re: [linux-lvm] LVM2 Metadata structure, extents ordering, metadata corruptions
Il 2022-09-27 12:10 Roberto Fastec ha scritto: questions 1. Given the premise 3. The corresponding LVM2 metadata/tables are and will be just a (allow me the term) "grid" "mapping that space" in an ordered sequence to in the subsequent use (and filling) of the RAID space "just mark" the used ones and the free ones? Or those grid cells will/could be in a messed order ? Classical linear LVM volume (read: not lvmthin) are mostly concatenated 4MB-sized chunk of space, but this is not a given (especially if some volumes changed in size). And explicitly I mean. In case of metadata corruption (always with respect of premise 3.) , could we just generate a dummy metadata table with all the extents marked as "used" in such a way that we can anyway access them For linear volumes, one can try to setup a dmtable (or dummy metadata) to linearly read the data but, as stated above, this is far from reliable. 2. Does it exist a sort of "fsck" for the LVM2 metadata ? We do technical assistance and recently, specifically with those NAS devices that make use of LVM2, we have experienced really easy metadata corruption in occurence of just nothing or because of a electric power interruption (which is really astonishing). We mean no drives failures , no bad SMARTs . Just corruption from "nowhere" and "nocause" For classical LVM, the metadata are actually backed up in ascii format unser /etc/lvm. While LVM itself keep a binary metadata representation, it also accept/store the textual so you can use the latter to restore your volumes. Do you notice how I explicitly talked about *classical* volumes? This is because thin volumes (man lvmthin) use completely different, and much more complex, allocation strategies. Losing such metadata would kill the entire thin pool, and this is the reason a backup metadata volume is required for some operations. thincheck is effectively a sort ot "lvmthin fsck", but if you ever need to use it, be prepared to data loss (ranging from small to massive). I saw various NAS that used custom-patched lvmthin volumes, and I suppose this is the root of your issues. If it is acceptable for your workload, try using classical LVM on these NAS. Regards. -- Danti Gionatan Supporto Tecnico Assyoma S.r.l. - www.assyoma.it email: g.da...@assyoma.it - i...@assyoma.it GPG public key ID: FF5F32A8 ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Re: [linux-lvm] LVM2 Metadata structure, extents ordering, metadata corruptions
Dne 29. 09. 22 v 13:15 Roberto Fastec napsal(a): Hello Zdenek Thank you for the explanation May I kindly ask you what/which is the command line API to access and manipulate those metadata? 'command line API' in the mean of: To create LV -- 'lvcreate' To remove LV -- 'lvremove' Note - many command can actually work without physical interaction with DM layer (--driverloaded n) - however in some case some targets require presence of DM. lvm2 commands are the way how to change your metadata properly. And when you say vi editor, do you kindly mean direct edit of HEX values on the raw metadata? No way - you can't change metadata on disk - unless you would be basically precisely copying what lvm2 command does - so what would be the point ?? Simply use lvm2 command to make the job. Unless I'm missing some important point why would you need to work with lvm2 metadata but without lvm2 ?? Thank you If you kindly may have some link to some documentation, thank you even more Though here it is not the configuration that got lost Well yeah - it will take some time - but i.e. RHEL storage documentation might be a good way to go through it. Also, additional info, we now got that all the cases do have active the thin-provisionin and looks like that these are additional/different metadata tables This-provisioning is handled by LVM2 only to provide LVs for metadata and data LVs - and then the thinLVs to a user. Physical block layout for thin-provisioning is fully stored inside thin-pool's metadata device. To explore those mappings you need to use tools like 'thin_dump', 'thin_ls' So if these got messed/corrupted... If these thin-pool metadata get corrupted, there is tool: 'thin_repair'. Note: corruption of some high-level bTree nodes may result a severe damage to whole metadata structure -> i.e. lots of thinLVs being lost. It's a good idea to keep such metadata on some resilient type of storage (raid) and of course rule #1 - create regular backups of your thin volumes... (snapshot of thinLV is not a backup!). In QNAP looks they have made some customization and so thin-provision LVM metadata are on a dedicated partition we observed the HEX inside there and got partially the logic About thin-provisioning, again, any "fsck"-like is available? (I suppose no, but just as confirmation) This tool is called 'thin_check' (and this tool is in fact executed with every thin-pool activation & deactivation by default by lvm2) Note: just like with lvm2 metadata - also thin-pool's kernel metadata are check-summed (protected agains disc bit corruptions), so again zero chance with any 'hex-editor' to manipulate them - unless you would 'recreate' thin-pool engine... Regards Zdenek ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Re: [linux-lvm] LVM2 Metadata structure, extents ordering, metadata corruptions
Dne 27. 09. 22 v 12:10 Roberto Fastec napsal(a): Dear friends of the LVM mailing list I suppose this question is for some real LVM2 guru or even developer Here I kindly make three question with three premises premises 1. I'm a total noob about LVM2 low level logic, so I'm sorry of the questions will sound silly :-) 2. The following applies to a whole md RAID (in my example it will be a RAID5 made of 4 drives 1TB each so useful available space more or less 2.7TB) 3. I assign whole those 2.7TB to one single PV and one single VG and one single LV. questions 1. Given the premise 3. The corresponding LVM2 metadata/tables are and will be just a (allow me the term) "grid" "mapping that space" in an ordered sequence to in the subsequent use (and filling) of the RAID space "just mark" the used ones and the free ones? Or those grid cells will/could be in a messed order ? And explicitly I mean. In case of metadata corruption (always with respect of premise 3.) , could we just generate a dummy metadata table with all the extents marked as "used" in such a way that we can anyway access them And can we expect to have them ordered? lvm2 'metadata handling' is purely internal to the lvm2 codebase - you can't rely on any 'witnessed/observed' logic. There is cmdline API to access and manipulate metadata in most cases. Temporarily you can i.e. update/modify your current metadata with 'vi' editor and vgcfgrestore them - however this is not a 'guaranteed' operational mode - rather a workaround if the 'cmdline' interface is not handling some error case well - and it should be used as RFE to enhance lvm2 in such case. 2. Does it exist a sort of "fsck" for the LVM2 metadata ? We do technical assistance and recently, specifically with those NAS devices that make use of In general - lvm2 metadata on disk always do have CRC32 checksum - when invalid -> metadata is garbage. Each loaded CRC32 correct metadata is always then fully validated - yep it can be sometimes a bit costly in the case of very large metadata size - but so far - no big problems - CPUs are mostly getting faster as well... so bigger setups tends to have also powerful hw LVM2, we have experienced really easy metadata corruption in occurence of just nothing or because of a electric power interruption (which is really astonishing). We mean no drives failures , no bad SMARTs . Just corruption from "nowhere" and "nocause" Corrupted metadata are always considered unusable - user has to restore to previous valid version (and here sometimes all the combinations of error might eventually require 'vi editor' assistance - but again - in very very unusual circumstances. Metadata are archived in /etc/lvm/archive and they are also in ring-buffer present on all PVs in a VG - if there are too many PVs - user can 'opt-out' and consider only a subset of PVs to hold metadata - i.e. 200PVs - and only 20PVs holding metadata - but these are highly unusual configurations... Regards Zdenek ___ linux-lvm mailing list linux-lvm@redhat.com https://listman.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
