Hi,
On 07/13/2009 08:21 PM, Karicheri, Muralidharan wrote:
Hi,
I need to implement some controls for my driver and would like to understand
the control ioctl framework available today. I am not very sure how the control
ioctls are to be implemented and it is not well defined in the
Hello Hans,
I looked into the patch - just to be informed what's going on and got
confused by such code.
I reimplemented it to test it against side effects and still do not
understand why it is written so complicated. Sure, I don't know the
environment of the code, but does it matter in this case
Hello,
I'm new to v4l-development. I was able to get the raw image into my application
successfully. But the current problem is not only in limited to my
self-developed application.
All of my USB-webcams will get less FPS as darker the image becomes. In optimal
cases I get around 30 frames
Hi!
aldo...@gmx.de wrote:
Hello,
I'm new to v4l-development. I was able to get the raw image into my
application successfully. But the current problem is not only in limited to
my self-developed application.
All of my USB-webcams will get less FPS as darker the image becomes. In
Hello Sergio,
I spoke with you earlier about using the ISP and omap34xxcam drivers with a
micron mt9d111 SOC sensor. I have since been able to take pictures, but the
sensor data is not making it through the ISP data-path correctly. I know the
problem is in the ISP data-path because I am
Hello Zach,
unfortunately I cannot help you, but maybe you can tell me what driver you
use? Where I can find it?
Thanks in advance
/Jesko
-Ursprüngliche Nachricht-
Von: linux-media-ow...@vger.kernel.org
[mailto:linux-media-ow...@vger.kernel.org] Im Auftrag von Zach LeRoy
Gesendet:
Zach,
We've gotten a Aptina MT9P031 driver working with the latest ISP
patchset, both with YUV and RAW data.
I don't know what the problem might be with YUYV data - we get useful
YUYV data without any changes to the ISP defaults.
However, to request RAW data, that simply uses the CCDC and
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Tue Jul 14 19:00:07 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 12243:d003140961a9
gcc version: gcc
Eddy and anyone who may be able to help,
I am currently working on an Omnivision OV5620 and have used the
ov3640 driver as a starting point. I have the June 18( latest ? )
code from the gitorious git repo. I have thouroughly tested my i2c
driver setup using a 500 Mhz oscilloscope and have
There is a bug in DvbStream::gotoX in Kaffeine 0.8.8, which is fixed by
the
attached patch.
Look for example at what happens when azimuth = 15.951. The motor should
be
driven to 16.0 degrees, but when 15.951 is rounded up with if (USALS0.5)
++rd; the carries into the upper nibble of CMD2
As far as I know the hardware of the Hauppauge HVR-4000 (cx24114 demod)
supports DiSEqC 2.x, but there seems to be no implementation
of diseqc_recv_slave_reply to obtain the messages from the slaves.
DiSEqC 1.x works fine as far as I can tell.
Grepping for slave_reply implementations in v4l-dvb
Mauro,
Please pull from http://linuxtv.org/hg/~obi/dmx-add-pid
for the following 2 changesets:
01/02: Add two new ioctls: DMX_ADD_PID and DMX_REMOVE_PID
http://linuxtv.org/hg/~obi/dmx-add-pid?cmd=changeset;node=9498520f2b86
02/02: Remove a useless check from dvb_dmx_swfilter_packet()
Em Tue, 14 Jul 2009 10:24:19 +0530
chaithrika chaithr...@ti.com escreveu:
On Sat, Jul 11, 2009 at 01:49:46, Mauro Carvalho Chehab wrote:
Em Mon, 6 Jul 2009 20:24:44 +0200
Hans Verkuil hverk...@xs4all.nl escreveu:
Hi Mauro,
Please pull from
Hi,
2009/7/12 Hans Verkuil hverk...@xs4all.nl:
On Saturday 11 July 2009 13:02:33 Dongsoo, Nathaniel Kim wrote:
Hi,
The thing is - Is it possible to make the subdev device not to be
turned on in registering process using any of v4l2_i2c_new_subdev*** ?
You can say that I can ignore the i2c
Zitat von Johan Henæs jo...@henes.no:
Hi !
Recently I have bought three TechnoTrend C-2300 for use in my Mythtv-
system. Everything seemed to go smooth, but for a major share of the
channels I have problems getting a channel lock. (Or if I do on some
of them, I get a distorted image with lots
Am Montag, den 13.07.2009, 16:36 +0200 schrieb Samuel Rakitnican:
Hi Hermann,
On Sun, 12 Jul 2009 23:33:06 +0200, hermann pitton
hermann-pit...@arcor.de wrote:
[snip]
Hm, if I get it right, without using windows previously the XCeive at
0x61 is not found and then it is tried in
On Sun, Jul 12, 2009 at 11:23 PM, Devin
Heitmuellerdheitmuel...@kernellabs.com wrote:
Hello Mauro,
Please pull from
http://kernellabs.com/hg/~dheitmueller/pinnacle_hybrid_2881 for the
following:
em28xx: set GPIO properly for Pinnacle Hybrid Pro analog support
em28xx: make support work for
Russell,
Requesting your review and ack on this updated patch.
Regards,
Chaithrika
On Tue, Jul 07, 2009 at 17:22:57, Chaithrika U S wrote:
Platform specific display device setup for DM646x EVM
Add platform device and resource structures. Also define a platform
specific clock setup function
18 matches
Mail list logo
