Hi,
i have some problems getting a technotrend tt-connect s-2400 usb dvb-s
card to work. the problem is not unknown (as mentioned at
http://lkml.org/lkml/2009/5/23/95) but i have no idea how to fix this.
(any help according to the remote of this card would also be appreciated)
dmesg:
usb 2-2
Add a driver for Earthsoft PT1
Eearthsoft PT1 is a PCI card for Japanese broadcasting with two ISDB-S
and ISDB-T demodulators.
This card has neither MPEG decoder nor conditional access module
onboard. It transmits only compressed and possibly encrypted MPEG data
over the PCI bus, so you need an
Add the DTV_ISDB_TS_ID property for ISDB-S
In ISDB-S, time-devision duplex is used to multiplexing several waves
in the same frequency. Each wave is identified by its own transport
stream ID, or TS ID. We need to provide some way to specify this ID
from user applications to handle ISDB-S frontend
On Sun, 2009-08-23 at 02:32 +0200, Fau wrote:
> Greetings,
> I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
> and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
> stable as writing).
>
> Following the manual at http://www.linuxtv.org/wiki/index.php/
On Sat, 2009-08-22 at 10:47 -0400, Andy Walls wrote:
> On Sat, 2009-08-22 at 09:42 +0200, Hans Verkuil wrote:
> > On Saturday 22 August 2009 04:09:00 Andy Walls wrote:
> > > In the course of implementing code to run the Consumer IR circuitry in
> > > the CX2584[0123] chip and similar cores, I need
Am Freitag, den 21.08.2009, 01:49 +0200 schrieb hermann pitton:
> There is a great maintenance mess for those devices currently.
>
> All attempts, to get some further information out of those assumed to be
> closest to the above manufactures, failed.
>
> Against any previous advice, newer produc
Le Sunday 23 August 2009 02:18:14 Norbert Weinhold, vous avez écrit :
> Hi,
>
> I have a floppyDTV S2 and I can't tune to dvb-s2 channels while normal
> dvb-s channel work.
>
> Does anyone have a clue where the problem is.
Are you sure the driver supports S2 at all ?
--
Christophe Thommeret
-
2009/8/23 Devin Heitmueller :
> On Sat, Aug 22, 2009 at 8:32 PM, Fau wrote:
>> Greetings,
>> I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
>> and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
>> stable as writing).
>>
>> Following the manual at htt
On Sat, Aug 22, 2009 at 8:32 PM, Fau wrote:
> Greetings,
> I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
> and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
> stable as writing).
>
> Following the manual at http://www.linuxtv.org/wiki/index.php/Em2
On Sat, Aug 22, 2009 at 8:32 PM, Fau wrote:
> Greetings,
> I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
> and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
> stable as writing).
>
> Following the manual at http://www.linuxtv.org/wiki/index.php/Em2
Greetings,
I have an USB TV adapter identified as Hauppauge WinTV HVR 900 (R2) (card=18)
and I'm using Fedora 11 with linux kernel vanilla 2.6.30.5 (the last
stable as writing).
Following the manual at http://www.linuxtv.org/wiki/index.php/Em28xx_devices
i've extracted and copied xc3028-v27.fw in
Hi Daniel,
Am Samstag, den 22.08.2009, 12:31 +0200 schrieb Daniel Senftleben:
[snip]
>
> G'day all
>
> I've bought myself the "HPC2000 hybrid tv pci card" for one reason because
> x3m
> said it supports linux.. well, it never worked for me (now I'm at Suse 11.1
> 64bit and I used to use the p
Hello,
I saw some old posts on this maillist about someone trying to get some
information on a Linux Avermedia A312 driver around Nov., 2008. I'm
just wondering if any progress has been made towards this driver.
I'm interested since I do have a USB Avermedia A312 (ATSC capable) card
in my
On Sat, Aug 22, 2009 at 4:09 PM, Atlanta Geek wrote:
> Using the linuxtv-dvb-apps
> I find scan generates a file with only six parameters per digital
> channel when generating the channels.conf file.
> However czap requires 8 parameters.
> This is for a cable network.
> Does anyone have any sugges
On Sat, 2009-08-22 at 13:04 -0300, Mauro Carvalho Chehab wrote:
> Em Fri, 21 Aug 2009 22:09:00 -0400
> Andy Walls escreveu:
>
> > In the course of implementing code to run the Consumer IR circuitry in
> > the CX2584[0123] chip and similar cores, I need to add
> > v4l2_subdev_ir_ops for manipulati
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Sat Aug 22 19:00:04 CEST 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 12496:58783152e493
gcc version: gcc
The patch introduces new snd_saa7134_capsrc_set (code taken from
snd_saa7134_capsrc_put) that updates also the ALSA capture controls during
snd_card_saa7134_capture_prepare and snd_saa7134_capsrc_put.
There can be much more work done in order to unify the control of the card
(now the card's captur
On Saturday 22 August 2009 17:37:19 Rath wrote:
> > On Thursday 20 August 2009 16:48:16 Rath wrote:
> > > Can I get higher framerates than 30fps (The webcam supports framerates
> > > up to 90fps)?
> >
> > Not with the SPC1330NC. 90fps is just a marketing claim achieved by
> > software
> > interpola
Hello kernel developers.
I found a bug report from an user in launchpad. I just copy it here. It
includes patch.
I don't own the necessary hardware to test it but the patch looks trivial.
I'm not subscribed to this list, so please CC me. Thanks!
Here is the text:
"""
remote control for my tv c
Em Fri, 21 Aug 2009 22:09:00 -0400
Andy Walls escreveu:
> In the course of implementing code to run the Consumer IR circuitry in
> the CX2584[0123] chip and similar cores, I need to add
> v4l2_subdev_ir_ops for manipulating the device and fetch and send data.
>
> In line below is a proposal at w
Hi,
On Thursday 20 August 2009 16:48:16 Rath wrote:
are the Philips SPC1330NC and SPC2050NC supported by v4l?
The SPC1330NC is supported by the uvcvideo driver. I haven't heard about
the
SPC2050NC yet. My guess is that it would be a UVC device as well. Could
you
please post the output
On Sat, 2009-08-22 at 09:42 +0200, Hans Verkuil wrote:
> On Saturday 22 August 2009 04:09:00 Andy Walls wrote:
> > In the course of implementing code to run the Consumer IR circuitry in
> > the CX2584[0123] chip and similar cores, I need to add
> > v4l2_subdev_ir_ops for manipulating the device and
Hi
I just sent this mail, but that "ML is deprecated" :-(
So here goes to the alternative address given in the mail:
-- Weitergeleitete Nachricht --
Betreff: x3m_HPC2000
Datum: Samstag, 22. August 2009
Von: Daniel S
An: linux-...@linuxtv.org
G'day all
I've bought myself the
On Saturday 22 August 2009 04:09:00 Andy Walls wrote:
> In the course of implementing code to run the Consumer IR circuitry in
> the CX2584[0123] chip and similar cores, I need to add
> v4l2_subdev_ir_ops for manipulating the device and fetch and send data.
>
> In line below is a proposal at what I
24 matches
Mail list logo
