On Wed, May 30, 2012 at 05:05:47PM -0300, Ezequiel Garcia wrote:
On Wed, May 30, 2012 at 4:43 PM, Ezequiel Garcia elezegar...@gmail.com
wrote:
But the subject is *very* wrong. You should set it to something like:
[bt8xx] Remove duplicated pixel format entry.
Sorry this should
Hello,
On 5/30/12 3:42 PM, Ezequiel Garcia wrote:
This patch could ease the job of a few people,
by providing an option they actually need.
OpenWRT [1] and Openembedded [2] are already disabling
qv4l2 by applying ugly patches.
[1]
Signed-off-by: Volokh Konstantin volok...@gmail.com
---
drivers/media/video/bt8xx/bttv-driver.c |6 --
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c
+b/drivers/media/video/bt8xx/bttv-driver.c
index e581b37..b4ee7de 100644
---
On Thu, May 31, 2012 at 11:08:51AM +0400, vol...@telros.ru wrote:
Signed-off-by: Volokh Konstantin volok...@gmail.com
---
drivers/media/video/bt8xx/bttv-driver.c |6 --
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c
Signed-off-by: Volokh Konstantin volok...@gmail.com
---
drivers/media/video/bt8xx/bttv-driver.c |6 --
1 files changed, 0 insertions(+), 6 deletions(-)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c
b/drivers/media/video/bt8xx/bttv-driver.c
index a9cfb0f..4e2f96f 100644
---
Hi Mauro,
These patches improve VIDIOC_S_HW_FREQ_SEEK and add frequency band support.
These changes are needed for both existing drivers (wl128x and radio-cadet)
and new drivers (the Griffin RadioShark driver that Hans de Goede made).
Once this is in these drivers can follow.
Regards,
2012/5/29 Laurent Pinchart laurent.pinch...@ideasonboard.com:
Hi Jean-Philippe,
On Tuesday 29 May 2012 10:24:45 jean-philippe francois wrote:
Hi,
omap3 ISP previewer block can convert a raw bayer image into a UYVY image.
Debayering coefficient are stored in an undocumented table. In the
Hi all,
This patch series implements this RFC:
http://www.spinics.net/lists/linux-media/msg47671.html
The changes since that RFC are:
- Added a start_block to struct v4l2_subdev_edid: this allows you to get
specific EDID blocks
instead of all blocks from the beginning. This field must be 0
From: Hans Verkuil hans.verk...@cisco.com
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/video/v4l2-subdev.c |6 ++
include/media/v4l2-subdev.h |2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/media/video/v4l2-subdev.c
From: Hans Verkuil hans.verk...@cisco.com
These new controls and two new ioctls make it possible to properly support
VGA, DVI-A/D/I, HDMI and DisplayPort connectors. All these controls and the
ioctls are all at the sub-device level. They are meant for V4L2 bridge/platform
drivers or to be
Mauro,
The following patch set adds the media controller based driver TI dm365 SoC.
Patches have gone through RFC and reviews and are pending for some time.
The main support added here:
-CCDC capture
-Previewer
-Resizer
-AEW/AF
-Some media formats supported on dm365
-PIX_FORMATs supported on
Hi Gregor,
On Thu, May 31, 2012 at 4:07 AM, Gregor Jasny gja...@googlemail.com wrote:
Hello,
On 5/30/12 3:42 PM, Ezequiel Garcia wrote:
This patch could ease the job of a few people,
by providing an option they actually need.
OpenWRT [1] and Openembedded [2] are already disabling
qv4l2
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Thu May 31 19:00:18 CEST 2012
git hash:5472d3f17845c4398c6a510b46855820920c2181
gcc version: i686-linux-gcc
Patch id 6016af82eafcb6e086a8f2a2197b46029a843d68 ([media] v4l2: use __u32
rather than enums in ioctl() structs) unintentionally changes the type of
the format field in struct v4l2_create_buffers from struct v4l2_format to
__u32. Revert that change.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
I have an old Intel webcam that shows up as:
Bus 002 Device 005: ID 8086:0431 Intel Corp. Intel Pro Video PC Camera
My hazy memory says that this used to work on linux with the spca_50x driver,
though I think I had to add the vendor/device ID manually to the driver. Is
there any way to
15 matches
Mail list logo