Tim,
Tim Harvey writes:
> What version of kernel are you using and what specific board model do
> you have (full board model and/or serial number so I know if you've
> got an IMX6DL or an IMX6Q) and have you modified the device-tree? I
> tested the adv7180 a couple of
On 05/19/2018 01:19 AM, Boris Ostrovsky wrote:
On 05/17/2018 04:26 AM, Oleksandr Andrushchenko wrote:
From: Oleksandr Andrushchenko
Signed-off-by: Oleksandr Andrushchenko
---
drivers/xen/grant-table.c | 49
On 05/19/2018 01:04 AM, Boris Ostrovsky wrote:
On 05/17/2018 04:26 AM, Oleksandr Andrushchenko wrote:
From: Oleksandr Andrushchenko
A commit message would be useful.
Sure, v1 will have it
Signed-off-by: Oleksandr Andrushchenko
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Mon May 21 05:00:11 CEST 2018
media-tree git hash:7e6b6b945272c20f6b78d319e07f27897a8373c9
media_build
Reviewed-by: Steve Longerbeam
On 05/18/2018 06:56 AM, Jan Luebbe wrote:
By checking and handling the internal IPU formats (ARGB or AYUV) first,
we don't need to check whether it's a bayer format, as we can default to
passing the input format on in all other cases.
Hi,
2018-05-20 16:24 GMT+09:00 Laurent Pinchart
:
> All source files of the vsp1 driver are licensed under the GPLv2+ except
> for vsp1_regs.h which is licensed under GPLv2. This is caused by a bad
> copy that dates back from the initial version of the
The open() operation for the pxa_camera driver always calls s_power()
operation to put its subdevice sensor in normal operation mode, and the
release() operation always call s_power() operation to put the subdevice
in power saving mode.
This requires the subdevice sensor driver to keep track of
DMA requests must be blocked before resetting VDE HW, otherwise it is
possible to get a memory corruption or a machine hang. Use the reset
control provided by the Memory Controller to block DMA before resetting
the VDE HW.
Signed-off-by: Dmitry Osipenko
---
Hook up Memory Client reset of the Video Decoder to the decoders DT node.
Signed-off-by: Dmitry Osipenko
---
arch/arm/boot/dts/tegra30.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
Hook up Memory Client reset of the Video Decoder to the decoders DT node.
Signed-off-by: Dmitry Osipenko
---
arch/arm/boot/dts/tegra20.dtsi | 7 +--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20.dtsi
Hi Mauro,
The following changes since commit 8ed8bba70b4355b1ba029b151ade84475dd12991:
media: imx274: remove non-indexed pointers from mode_table (2018-05-17
06:22:08 -0400)
are available in the Git repository at:
git://linuxtv.org/pinchartl/media.git v4l2/vsp1/next
for you to fetch
Lieber Freund,
Ich bin Herr Richard Wahl der Mega-Gewinner von $ 533M In Mega Millions Jackpot
spende ich an 5 zufällige Personen, wenn Sie diese E-Mail erhalten, dann wurde
Ihre E-Mail nach einem Spinball ausgewählt. Ich habe den größten Teil meines
Vermögens auf eine Reihe von
All source files of the vsp1 driver are licensed under the GPLv2+ except
for vsp1_regs.h which is licensed under GPLv2. This is caused by a bad
copy that dates back from the initial version of the driver. Fix
it.
Cc: Nobuhiro Iwamatsu
Acked-by: Kieran Bingham
Hi Kieran,
On Wednesday, 28 February 2018 22:52:43 EEST Kieran Bingham wrote:
> The display list originally allocated a body of 256 entries to store all
> of the register lists required for each frame.
>
> This has now been separated into fragments for constant stream setup, and
> runtime
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/usb/cx231xx/cx231xx-i2c.c | 2 --
1 file changed, 2 deletions(-)
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/pci/netup_unidvb/netup_unidvb_i2c.c | 5 -
1 file changed, 5
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/usb/em28xx/em28xx-i2c.c | 4
1 file changed, 4 deletions(-)
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/radio/si4713/radio-usb-si4713.c | 3 ---
1 file changed, 3
The core does it now, we can simplify drivers.
Based on v4.17-rc5. buildbot is happy. I'd suggest the media tree.
Thanks,
Wolfram
Wolfram Sang (7):
media: netup_unidvb: don't check number of messages in the driver
media: si4713: don't check number of messages in the driver
media:
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/usb/hdpvr/hdpvr-i2c.c | 3 ---
1 file changed, 3 deletions(-)
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/usb/dvb-usb/m920x.c | 3 ---
1 file changed, 3 deletions(-)
diff
Since commit 1eace8344c02 ("i2c: add param sanity check to
i2c_transfer()"), the I2C core does this check now. We can remove it
from drivers.
Signed-off-by: Wolfram Sang
---
Only build tested.
drivers/media/usb/tm6000/tm6000-i2c.c | 2 --
1 file changed, 2 deletions(-)
22 matches
Mail list logo