Martin Blumenstingl writes:
Currently there are two different commands: the old command which takes
4 parameters, and a newer one with just takes 2 parameters.
Hi,
are you sure about this?
From what I have been told, the 2 parameter command is in the
firmware ROM and older loadable/patch
Em 29-06-2012 12:58, Martin Blumenstingl escreveu:
Hi Ralph,
are you sure about this?
From what I have been told, the 2 parameter command is in the
firmware ROM and older loadable/patch firmwares.
Newer firmwares provided the 4 parameter command.
The firmwares in the ROM are a good point.
Hi,
I didn't tell old command, or at least not in the sense of old firmware. I
told
that the first drivers (ddbridge and mantis), based on drxk_ac3.mc firmware,
use the
4-parameters variant, while the other drivers use the 2-parameters variant.
Oh sorry, I must have gotten that wrong.
Currently there are two different commands: the old command which takes
4 parameters, and a newer one with just takes 2 parameters.
The driver shows an error in dmesg When using the old command with a new
firmware. Unfortunately this happens every time when chaning the
frequency (on DVB-C).
This