---
drivers/media/dvb/frontends/drx_dap_fasi.h | 268 ++++++++++++++++++++++++++++
1 files changed, 268 insertions(+), 0 deletions(-)
create mode 100644 drivers/media/dvb/frontends/drx_dap_fasi.h
diff --git a/drivers/media/dvb/frontends/drx_dap_fasi.h
b/drivers/media/dvb/frontends/drx_dap_fasi.h
new file mode 100644
index 0000000..b1c0eb6
--- /dev/null
+++ b/drivers/media/dvb/frontends/drx_dap_fasi.h
@@ -0,0 +1,268 @@
+/*
+ Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+ * Neither the name of Trident Microsystems nor Hauppauge Computer Works
+ nor the names of its contributors may be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/*******************************************************************************
+* FILENAME: $Id: drx_dap_fasi.h,v 1.5 2009/07/07 14:21:40 justin Exp $
+*
+* DESCRIPTION:
+* Part of DRX driver.
+* Data access protocol: Fast Access Sequential Interface (fasi)
+* Fast access, because of short addressing format (16 instead of 32 bits addr)
+* Sequential, because of I2C.
+*
+* USAGE:
+* Include.
+*
+* NOTES:
+*
+*
+*******************************************************************************/
+
+/*-------- compilation control switches
--------------------------------------*/
+
+#ifndef __DRX_DAP_FASI_H__
+#define __DRX_DAP_FASI_H__
+
+/*-------- Required includes
-------------------------------------------------*/
+
+#include "drx_driver.h"
+
+/*-------- Defines, configuring the API
--------------------------------------*/
+
+/********************************************
+* Allowed address formats
+********************************************/
+
+/*
+* Comments about short/long addressing format:
+*
+* The DAP FASI offers long address format (4 bytes) and short address format
+* (2 bytes). The DAP can operate in 3 modes:
+* (1) only short
+* (2) only long
+* (3) both long and short but short preferred and long only when necesarry
+*
+* These modes must be selected compile time via compile switches.
+* Compile switch settings for the diffrent modes:
+* (1) DRXDAPFASI_LONG_ADDR_ALLOWED=0, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
+* (2) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=0
+* (3) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
+*
+* The default setting will be (3) both long and short.
+* The default setting will need no compile switches.
+* The default setting must be overridden if compile switches are already
+* defined.
+*
+*/
+
+/* set default */
+#if !defined(DRXDAPFASI_LONG_ADDR_ALLOWED)
+#define DRXDAPFASI_LONG_ADDR_ALLOWED 1
+#endif
+
+/* set default */
+#if !defined(DRXDAPFASI_SHORT_ADDR_ALLOWED)
+#define DRXDAPFASI_SHORT_ADDR_ALLOWED 1
+#endif
+
+/* check */
+#if ((DRXDAPFASI_LONG_ADDR_ALLOWED==0) && \
+ (DRXDAPFASI_SHORT_ADDR_ALLOWED==0))
+#error At least one of short- or long-addressing format must be allowed.
+*; /* illegal statement to force compiler error */
+#endif
+
+
+/********************************************
+* Single/master multi master setting
+********************************************/
+/*
+* Comments about SINGLE MASTER/MULTI MASTER modes:
+*
+* Consider the two sides:1) the master and 2)the slave.
+*
+* Master:
+* Single/multimaster operation set via DRXDAP_SINGLE_MASTER compile switch
+* + single master mode means no use of repeated starts
+* + multi master mode means use of repeated starts
+* Default is single master.
+* Default can be overriden by setting the compile switch DRXDAP_SINGLE_MASTER.
+*
+* Slave:
+* Single/multi master selected via the flags in the FASI protocol.
+* + single master means remember memory address between i2c packets
+* + multimaster means flush memory address between i2c packets
+* Default is single master, DAP FASI changes multi-master setting silently
+* into single master setting. This cannot be overrriden.
+*
+*/
+/* set default */
+#ifndef DRXDAP_SINGLE_MASTER
+#define DRXDAP_SINGLE_MASTER 0
+#endif
+
+/********************************************
+* Chunk/mode checking
+********************************************/
+/*
+* Comments about DRXDAP_MAX_WCHUNKSIZE in single or multi master mode and
+* in combination with short and long addressing format. All text below
+* assumes long addressing format. The table also includes information
+* for short ADDRessing format.
+*
+* In single master mode, data can be written by sending the register address
+* first, then two or four bytes of data in the next packet.
+* Because the device address plus a register address equals five bytes,
+* the mimimum chunk size must be five.
+* If ten-bit I2C device addresses are used, the minimum chunk size must be six,
+* because the I2C device address will then occupy two bytes when writing.
+*
+* Data in single master mode is transferred as follows:
+* <S> <devW> a0 a1 a2 a3 <P>
+* <S> <devW> d0 d1 [d2 d3] <P>
+* ..
+* or
+* ..
+* <S> <devW> a0 a1 a2 a3 <P>
+* <S> <devR> --- <P>
+*
+* In multi-master mode, the data must immediately follow the address (an I2C
+* stop resets the internal address), and hence the minimum chunk size is
+* 1 <I2C address> + 4 (register address) + 2 (data to send) = 7 bytes (8 if
+* 10-bit I2C device addresses are used).
+*
+* The 7-bit or 10-bit i2c address parameters is a runtime parameter.
+* The other parameters can be limited via compile time switches.
+*
+*-------------------------------------------------------------------------------
+*
+* Minimum chunk size table (in bytes):
+*
+* +----------------+----------------+
+* | 7b i2c addr | 10b i2c addr |
+* +----------------+----------------+
+* | single | multi | single | multi |
+* ------+--------+-------+--------+-------+
+* short | 3 | 5 | 4 | 6 |
+* long | 5 | 7 | 6 | 8 |
+* ------+--------+-------+--------+-------+
+*
+*/
+
+/* set default */
+#if !defined(DRXDAP_MAX_WCHUNKSIZE)
+#define DRXDAP_MAX_WCHUNKSIZE 254
+#endif
+
+/* check */
+#if ((DRXDAPFASI_LONG_ADDR_ALLOWED==0)&&(DRXDAPFASI_SHORT_ADDR_ALLOWED==1))
+#if DRXDAP_SINGLE_MASTER
+#define DRXDAP_MAX_WCHUNKSIZE_MIN 3
+#else
+#define DRXDAP_MAX_WCHUNKSIZE_MIN 5
+#endif
+#else
+#if DRXDAP_SINGLE_MASTER
+#define DRXDAP_MAX_WCHUNKSIZE_MIN 5
+#else
+#define DRXDAP_MAX_WCHUNKSIZE_MIN 7
+#endif
+#endif
+
+#if DRXDAP_MAX_WCHUNKSIZE < DRXDAP_MAX_WCHUNKSIZE_MIN
+#if ((DRXDAPFASI_LONG_ADDR_ALLOWED==0)&&(DRXDAPFASI_SHORT_ADDR_ALLOWED==1))
+#if DRXDAP_SINGLE_MASTER
+#error DRXDAP_MAX_WCHUNKSIZE must be at least 3 in single master mode
+*; /* illegal statement to force compiler error */
+#else
+#error DRXDAP_MAX_WCHUNKSIZE must be at least 5 in multi master mode
+*; /* illegal statement to force compiler error */
+#endif
+#else
+#if DRXDAP_SINGLE_MASTER
+#error DRXDAP_MAX_WCHUNKSIZE must be at least 5 in single master mode
+*; /* illegal statement to force compiler error */
+#else
+#error DRXDAP_MAX_WCHUNKSIZE must be at least 7 in multi master mode
+*; /* illegal statement to force compiler error */
+#endif
+#endif
+#endif
+
+/* set default */
+#if !defined(DRXDAP_MAX_RCHUNKSIZE)
+#define DRXDAP_MAX_RCHUNKSIZE 254
+#endif
+
+/* check */
+#if DRXDAP_MAX_RCHUNKSIZE < 2
+#error DRXDAP_MAX_RCHUNKSIZE must be at least 2
+*; /* illegal statement to force compiler error */
+#endif
+
+/* check */
+#if DRXDAP_MAX_RCHUNKSIZE & 1
+#error DRXDAP_MAX_RCHUNKSIZE must be even
+*; /* illegal statement to force compiler error */
+#endif
+
+/*-------- Public API functions
----------------------------------------------*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+extern DRXAccessFunc_t drxDapFASIFunct_g;
+
+#define DRXDAP_FASI_RMW 0x10000000
+#define DRXDAP_FASI_BROADCAST 0x20000000
+#define DRXDAP_FASI_CLEARCRC 0x80000000
+#define DRXDAP_FASI_SINGLE_MASTER 0xC0000000
+#define DRXDAP_FASI_MULTI_MASTER 0x40000000
+#define DRXDAP_FASI_SMM_SWITCH 0x40000000 /* single/multi master switch
*/
+#define DRXDAP_FASI_MODEFLAGS 0xC0000000
+#define DRXDAP_FASI_FLAGS 0xF0000000
+
+#define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr)>>22)&0x3F)
+#define DRXDAP_FASI_ADDR2BANK(addr) (((addr)>>16)&0x3F)
+#define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr)&0x7FFF)
+
+#define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr)& 0xFC30FF80)==0)
+#define DRXDAP_FASI_LONG_FORMAT(addr) (((addr)& 0xFC30FF80)!=0)
+#define DRXDAP_FASI_OFFSET_TOO_LARGE(addr) (((addr)& 0x00008000)!=0)
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __DRX_DAP_FASI_H__ */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
