Hi Dragos,
Thank you for the patch.
On Tuesday 24 May 2016 17:33:27 Dragos Bogdan wrote:
> The part can be reset by a low pulse on the RESET pin (i.e. a hardware
> reset) with a minimum width of 5 ms. It is recommended to wait 5 ms
> after the low pulse before an I2C write is performed to the
The part can be reset by a low pulse on the RESET pin (i.e. a hardware
reset) with a minimum width of 5 ms. It is recommended to wait 5 ms
after the low pulse before an I2C write is performed to the part.
For safety reasons, the delays will be between 5 and 10 ms.
The RESET pin can be tied high,
