Problem fixed. Both halves of tuner 2 work. The required drivers are
in www.kernellabs.com/hg/~stoth/saa7164-dev.
Thanks Steve Toth.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://v
On 8/25/09 10:18 PM, s...@cyberseth.com wrote:
Well my card is out the door already. So it'll be a week or so till i can
try again. I'll give it a pretty thorough run down when i get the new
card, maybe I can dig up a repro.
This is probably just a red herring, but FWIW I had never cold booted
Well my card is out the door already. So it'll be a week or so till i can
try again. I'll give it a pretty thorough run down when i get the new
card, maybe I can dig up a repro.
This is probably just a red herring, but FWIW I had never cold booted the
machine (except monday morning when i yanked
On 8/25/09 7:23 PM, Steven Toth wrote:
On 8/25/09 6:59 PM, Steven Toth wrote:
After reading Steven Toth's reply I tried adding 1 and then 2 2-way
splitters before the 2250 input. No joy. I also tried feeding the cable
directly into the 2250 with no splitters. Again - no joy.
Any other ideas?
M
On 8/25/09 6:59 PM, Steven Toth wrote:
After reading Steven Toth's reply I tried adding 1 and then 2 2-way
splitters before the 2250 input. No joy. I also tried feeding the cable
directly into the 2250 with no splitters. Again - no joy.
Any other ideas?
Most likely this is dependent on what fre
After reading Steven Toth's reply I tried adding 1 and then 2 2-way
splitters before the 2250 input. No joy. I also tried feeding the cable
directly into the 2250 with no splitters. Again - no joy.
Any other ideas?
Most likely this is dependent on what frequency the other tuner is tuned to,
e
ay warranty so I figure I'd
give that a try. I'll let you know in a week or so if the new card is any
better.
-Seth
--Original Message--
From: Steve Harrington
Sender: linux-media-ow...@vger.kernel.org
To: linux-media@vger.kernel.org
Subject: Re: Hauppauge 2250 - second tuner i
I have the same problem as Seth. My system will tune RF channel 85 and
below will not tune RF channel 91 and above on the second tuner only.
First tuner works fine on all channels as does the PC HDTV 5500 also in
the system. My normal configuration is a 4-way splitter from the cable
into the
On a side note - Thank you very much for hacking on the saa7164 - other
than this frequency glitch its been working great for me!
You're welcome! :)
--
Steven Toth - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a
On Wed, 2009-08-19 at 07:12 -0700, s...@cyberseth.com wrote:
> >> I'd really appreciate any help or guidance on this problem as i'm fully
> >> perplexed by it.
> >
> > Hey Seth,
> >
> > I ran the same tests on my cable system (channel 103) on 669Mhz and had no
> > issue, and my snr's reported as (0
>> I'd really appreciate any help or guidance on this problem as i'm fully
>> perplexed by it.
>
> Hey Seth,
>
> I ran the same tests on my cable system (channel 103) on 669Mhz and had no
> issue, and my snr's reported as (0x172 and 0x17c).
>
> One possibility is that you're overwhelming the fronte
I'd really appreciate any help or guidance on this problem as i'm fully
perplexed by it.
Hey Seth,
I ran the same tests on my cable system (channel 103) on 669Mhz and had no
issue, and my snr's reported as (0x172 and 0x17c).
One possibility is that you're overwhelming the frontend. Try addin
Hello,
I've run into a problem with my capture card and wanted to solicit
ideas on how to further pinpoint the problem and/or hopefully correct
it. At the risk of being to presumptious/terse - my problem is the
second tuner on the card is unable to lock on any frequency between
609mhz and 69
13 matches
Mail list logo