--- On Mon, 15/8/11, Steve Kerrison wrote:
> It depends on whether the problem is a weak signal or a too strong
> signal.
I suspect that the HD signal is too weak where I am, because I am in the
transmitter's "green area". So it's possible that I'll have to wait until April
before getting a dec
Hi Chris,
Take a look at this breakdown of muxes on the crystal palace
transmitter:
http://www.ukfree.tv/txdetail.php?a=TQ339712
You'll see mixed power levels and FFT sizes. I have the same thing
(albeit with a larger range of power levels) here in Mendip and as a
result its very difficult to ge
That is most likely the em28xx locking bug. It'll happen when you plug a
second em28xx device in, or plug one in for a second time. The steps
you've shown include that process. Try doing `rmmod em28xx-dvb` before
re-plugging the device. If that 'cures' it, you're a victim of the same
problem.
I'm
>> INFO: task khubd:1100 blocked for more than 120 seconds.
>> "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> khubd D 0 1100 2 0x
>> 8801a694e930 0046 8801a691ffd8 8162b020
>> 00010280 f
On 08/15/2011 02:56 AM, Chris Rankin wrote:
tuning status == 0x0f
tuning status == 0x0f
> WARNING: >>> tuning failed!!!
> ERROR: initial tuning failed
> dumping lists (0 services)
> Done.
>
> Although it was working (briefly) on Saturday morning.
>
>> Have you tried it on Windows?
>
>
--- On Mon, 15/8/11, Antti Palosaari wrote:
> T 55400 8MHz + auto auto auto etc.
> is enough.
Hmm, not here it isn't:
$ scandvb -u -vvv uk-CrystalPalace
scanning uk-CrystalPalace
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 55400 0 9 9 6 2 4 4
>
Another thing I've noticed - a successful hotplug outputs the following
messages into the dmesg log:
DVB: registering new adapter (em28xx #0)
DVB: registering adapter 0 frontend 0 (Sony CXD2820R (DVB-T/T2))...
DVB: registering adapter 0 frontend 1 (Sony CXD2820R (DVB-C))...
em28xx #0: Successfull
On 08/15/2011 02:20 AM, Chris Rankin wrote:
> I've been experimenting with my new PCTV 290e DVB-T2 device this weekend, and
> have a couple of observations. For example, the device sometimes has trouble
> initialising itself:
> INFO: task khubd:1100 blocked for more than 120 seconds.
> "echo 0 >
Hi,
I've been experimenting with my new PCTV 290e DVB-T2 device this weekend, and
have a couple of observations. For example, the device sometimes has trouble
initialising itself:
usb 4-2: new high speed USB device number 4 using ehci_hcd
em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps (20
