Hi everyone :)
Here the results, testing with Mplayer:
shell$ sudo modprobe em28xx card=5 tuner=66 --first-time --verbose
shell$ dmesg
[ 2520.516403] usbcore: registered new interface driver em28xx
[ 2520.516413] em28xx driver loaded
[ 2526.068029] usb 1-6: new high speed USB device using ehci_h
Carlos Jenkins wrote:
> Hi :) Thank again for the replies.
>
>> Well, if it actually has a tuner, then it is unlikely that any
>> existing board profile is going to help (ruling out the ability to
>> just use a "card=").
> Profile 5 is for this same card.
>
>> Do you know what tuner it contains?
Hi :) Thank again for the replies.
> Well, if it actually has a tuner, then it is unlikely that any
> existing board profile is going to help (ruling out the ability to
> just use a "card=").
Profile 5 is for this same card.
> Do you know what tuner it contains? Can you
> provide some hi-res pho
Carlos Jenkins wrote:
> 2010/2/10 Devin Heitmueller :
>> On Wed, Feb 10, 2010 at 3:41 PM, Mauro Carvalho Chehab
>> Does the device even have a tuner? I had assumed all the em2862
> It's a em2820 to be exact.
>
>> reference designs just did s-video and composite capture.
>
> This device has S-Vid
Carlos Jenkins wrote:
> As noted on the first mail, NTSC, same as US
> (http://es.wikipedia.org/wiki/Archivo:NTSC-PAL-SECAM.svg)
>
>> So, you may need to adjust the parameters bellow. For NTSC and 6 MHz
>> channels, the command syntax
>> is:
>>
>> mplayer -tv driver=v4l2:device=/dev/video0:norm=P
On Wed, Feb 10, 2010 at 4:10 PM, Carlos Jenkins
wrote:
> 2010/2/10 Devin Heitmueller :
>> On Wed, Feb 10, 2010 at 3:41 PM, Mauro Carvalho Chehab
>> Does the device even have a tuner? I had assumed all the em2862
> It's a em2820 to be exact.
>
>> reference designs just did s-video and composite ca
> The above messages seem ok, but I never tried to use tvtime with xinerama.
> This used to be a very good application, but it is not maintained anymore.
> Not sure if it works fine with newer xorg versions with xinerama. Also,
> by default, tvtime enables channel signal detection, but several tune
2010/2/10 Devin Heitmueller :
> On Wed, Feb 10, 2010 at 3:41 PM, Mauro Carvalho Chehab
> Does the device even have a tuner? I had assumed all the em2862
It's a em2820 to be exact.
> reference designs just did s-video and composite capture.
This device has S-Video, Composite and TVTuner.
This is
Hi, thanks for the replies.
> Try card=9,
Ok, done:
sudo modprobe em28xx card=9
[ 385.566364] Linux video capture interface: v2.00
[ 385.593590] usbcore: registered new interface driver em28xx
[ 385.593599] em28xx driver loaded
[ 400.104029] usb 1-6: new high speed USB device using ehci_hcd
On Wed, Feb 10, 2010 at 3:41 PM, Mauro Carvalho Chehab
wrote:
> The above messages seem ok, but I never tried to use tvtime with xinerama.
> This used to be a very good application, but it is not maintained anymore.
> Not sure if it works fine with newer xorg versions with xinerama. Also,
> by def
Carlos Jenkins wrote:
> Hi everyone.
>
> First of all, great job :)
>
> My name is Carlos Jenkins, and I'm here to help getting to work the
> MSI TV VOX 8609 USB 2.0 device once again. I know it's an old device,
> but here where I live, in Costa Rica, we still have analog TV only.
> So, what I
On Wed, Feb 10, 2010 at 2:02 PM, Carlos Jenkins
wrote:
> Hi everyone.
>
> First of all, great job :)
>
> My name is Carlos Jenkins, and I'm here to help getting to work the
> MSI TV VOX 8609 USB 2.0 device once again. I know it's an old device,
> but here where I live, in Costa Rica, we still have
Hi everyone.
First of all, great job :)
My name is Carlos Jenkins, and I'm here to help getting to work the
MSI TV VOX 8609 USB 2.0 device once again. I know it's an old device,
but here where I live, in Costa Rica, we still have analog TV only.
TV Standard: NTSC
This device is a em2820/SAA7114
13 matches
Mail list logo