Pete Zaitcev wrote:
On Sun, 24 May 2009 22:10:50 -0400 (EDT), Alan Stern
st...@rowland.harvard.edu wrote:
Pete, you should look at this. It appears to be a problem with the DMA
mapping in usbmon. Probably the same sort of thing you were working on
about a week ago (trying to access
Andy Walls wrote:
On Sun, 2009-05-24 at 13:40 +0200, Stefan Below wrote:
Why does the PBM image have this text in it:
# CREATOR: GIMP PNM Filter Version 1.1
if it came from Windows? Also why does the filename have crop in it?
Did you do some manipulation of the output file from
Hi,
On Fri, May 22, 2009 at 03:14:52PM +0200, Valentin Eduardo (Nokia-D/Helsinki)
wrote:
Hi,
There are two 'missing somethings': the first is that you can have a v4l2
driver that uses v4l2_i2c_subdev_board, but the i2c driver that is loaded
by that call can also by used by other
David wrote:
I wonder if CONFIG_HAVE_DMA_API_DEBUG does it (enabled with a select
in arch/x86/Kconfig). Strange that it started happening now.
That is enabled. I'll switch it off and give it another go.
While CONFIG_HAVE_DMA_API_DEBUG was set, DMA_API_DEBUG was not, so I
guess
On Mon, May 25, 2009 at 1:55 PM, Vito vcov...@libero.it wrote:
Hi all.
Hi Vito,
I've bought a Provideo 16 in capture PCI-Experess card for my own DVR
solution.
http://www.provideo.com.tw/DVRCARD_PV988.htm
This card have 8 TW6805 chip installed.
I've installed the card in a PC with Fedora
Em Wed, 20 May 2009 23:22:41 -0400
Devin Heitmueller dheitmuel...@kernellabs.com escreveu:
Hello Mauro,
Please pull from
http://kernellabs.com/hg/~dheitmueller/dvb-frontend-exit-fix for the
following:
dvb_frontend: fix case where fepriv-exit not reset
Didn't work. Please submit me again
Em Mon, 25 May 2009 13:17:02 +0200
Laurent Pinchart laurent.pinch...@skynet.be escreveu:
Hi everybody,
Márton Németh found an integer overflow bug in the extended control ioctl
handling code. This affects both video_usercopy and video_ioctl2. See
Hi Devin,
My queue of em28xx devices I'm adding support for is already three or
four deep. Ask again in a couple of weeks and I will see what I can
do to get this one working.
How are you queue looking? I would be very grateful to get my device
working in Linux :)
And thank you for you rapid
On Mon, May 25, 2009 at 8:51 AM, Mauro Carvalho Chehab
mche...@infradead.org wrote:
Didn't work. Please submit me again after fixing the trouble.
$ ./hgimport http://kernellabs.com/hg/~dheitmueller/dvb-frontend-exit-fix
Pushing from remote site
Manu wrote:
Easiest way to rmmod stb0899 is to go to your v4l-dvb devel directory
and do;
sudo make unload
indeed stb0899 is needed by other drivers (like budget_ci and others).
So this command will remove them all.
Anyway you need to compile all drivers from the same tree else things
will go
Alan Stern wrote:
Okay, here's a patch for you to try. It refreshes the toggle setting
in a linked but otherwise idle QH when a new URB is queued.
Alan Stern
Index: usb-2.6/drivers/usb/host/ehci-q.c
===
---
Hi Mauro,
Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb
for the following 6 changesets:
01/06: gspca - spca508: Cleanup source and update copyright.
http://linuxtv.org/hg/~jfrancois/v4l-dvb?cmd=changeset;node=59d19da68b20
02/06: gspca - spca508: Optimize code.
Devin, Yup, works nice now. Good work! --Neil
Devin Heitmueller wrote:
On Sat, May 23, 2009 at 5:15 PM, N Klepeis li...@klepeis.net wrote:
Hi,
I installed the latest v4l-dvb from CVS with the latest firmware
(dvb-fe-xc5000-1.6.114.fw) for the 801e (XC5000 chip). I can scan for
On Sun, 2009-05-24 at 20:52 -0400, David Ward wrote:
On 05/24/2009 07:10 PM, Matt Doran wrote:
Hi there,
I tried using the latest v4l code on an Mythtv box running 2.6.20, but
the v4l videodev module fails to load with the following warnings:
videodev: Unknown symbol
David wrote:
Alan Stern wrote:
Okay, here's a patch for you to try. It refreshes the toggle setting
in a linked but otherwise idle QH when a new URB is queued.
Alan Stern
Index: usb-2.6/drivers/usb/host/ehci-q.c
===
On Mon, 25 May 2009, Mauro Carvalho Chehab wrote:
+ if (params-frequency = 4800 params-frequency = 15400) \
+ bs = 0x09;
+ if (params-frequency = 16100 params-frequency = 43900)
\
+ bs = 0x0a;
+ if (params-frequency =
On Mon, 25 May 2009, Laurent Pinchart wrote:
diff -r e0d881b21bc9 linux/drivers/media/video/v4l2-ioctl.c
--- a/linux/drivers/media/video/v4l2-ioctl.c Tue May 19 15:12:17 2009 +0200
+++ b/linux/drivers/media/video/v4l2-ioctl.c Sun May 24 18:26:29 2009 +0200
@@ -402,6 +402,10 @@
#define TUNER_PHILIPS_FQ1216ME 24 /* you must actively select
B/G/D/K, I, L, L` */
#define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */
#define TUNER_PHILIPS_FM1216ME_MK3 38
#define TUNER_PHILIPS_FMD1216ME_MK3 63
#define
Igor M. Liplianin wrote:
On 20 May 2009 16:44:22 Simon Kenyon wrote:
mp3geek wrote:
Not even being detected in Linux 2.6.29.1, I have the modules dm1105
loaded, but since its not even being detected by linux..
lspci -vv shows this (I'm assuming this is the card..), dmesg shows
nothing
Am Montag, 25. Mai 2009 21:34:43 schrieb Martin Dauskardt:
#define TUNER_PHILIPS_FM1216MK5 79
result: picture o.k. , but audio disappears every few seconds (for about 1-2
seconds, then comes back)
correction: This is not a problem of tuner type 79. It happens also with tuner
type
Hello
I have some trouble with the initialisation of dvb_usb_nova_t_usb2: the
firmware is loaded about 1 minute after the module is registered by usbcore:
May 25 11:42:30 gandalf kernel: [ 79.511486] usbcore: registered new
interface driver dvb_usb_nova_t_usb2
May 25 11:43:30 gandalf kernel:
On Mon, 25 May 2009, David wrote:
David wrote:
Alan Stern wrote:
Okay, here's a patch for you to try. It refreshes the toggle setting
in a linked but otherwise idle QH when a new URB is queued.
Alan Stern
Index: usb-2.6/drivers/usb/host/ehci-q.c
Hello,
While discovering the bttv code (I'd like to add support to a yet
unsupported bttv derivative, the PMS PDI Deluxe) I found a strange commit:
changeset: 10944:6b90215088f0
user:Mauro Carvalho Chehab mche...@redhat.com
date:Wed Mar 11 08:18:53 2009 -0300
summary:
Hi,
Am Montag, den 25.05.2009, 21:34 +0200 schrieb Martin Dauskardt:
#define TUNER_PHILIPS_FQ1216ME 24 /* you must actively select
B/G/D/K, I, L, L` */
#define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */
#define TUNER_PHILIPS_FM1216ME_MK3 38
Hi Devin,
Do you have the USB trace you used as the basis for this dump? And
did you programatically parse that dump to generate the table, or did
you enter it by hand? Could you please email me the underlying dump
so I can double check the data?
I wrote a program to parse the trace and
Hi,
Am Montag, den 25.05.2009, 22:04 +0200 schrieb Martin Dauskardt:
Am Montag, 25. Mai 2009 21:34:43 schrieb Martin Dauskardt:
#define TUNER_PHILIPS_FM1216MK5 79
result: picture o.k. , but audio disappears every few seconds (for about
1-2
seconds, then comes back)
Hi,
Am Montag, den 25.05.2009, 23:26 +0200 schrieb Nicolas Léveillé:
Hello,
While discovering the bttv code (I'd like to add support to a yet
unsupported bttv derivative, the PMS PDI Deluxe) I found a strange commit:
changeset: 10944:6b90215088f0
user:Mauro Carvalho Chehab
On Mon, May 25, 2009 at 6:03 PM, Frank Dischner
phaedrus...@googlemail.com wrote:
While I'm at it, I thought I'd go ahead and make a patch to remove the
top bits from the vsb table, but I've got a question about that. I
think the first four entries are unnecessary. I'm pretty sure 8090 and
On Mon, 25 May 2009 13:25:55 +0100, David da...@unsolicited.net wrote:
I wonder if CONFIG_HAVE_DMA_API_DEBUG does it (enabled with a select
in arch/x86/Kconfig). Strange that it started happening now.
That is enabled. I'll switch it off and give it another go.
While
Hi,
Am Montag, den 25.05.2009, 23:45 +0200 schrieb hermann pitton:
Hi,
Am Montag, den 25.05.2009, 21:34 +0200 schrieb Martin Dauskardt:
#define TUNER_PHILIPS_FQ1216ME 24 /* you must actively
select
B/G/D/K, I, L, L` */
#define TUNER_PHILIPS_FQ1216AME_MK4 56
Andy Walls wrote:
On Sun, 2009-05-24 at 20:52 -0400, David Ward wrote:
On 05/24/2009 07:10 PM, Matt Doran wrote:
Hi there,
I tried using the latest v4l code on an Mythtv box running 2.6.20, but
the v4l videodev module fails to load with the following warnings:
videodev: Unknown
Hi,
When inserting a SCM/Viaccess CAM, I get the following message:
dvb_ca adapter 0: DVB CAM did not respond :(
According to this:
http://linuxtv.org/hg/v4l-dvb/file/142fd6020df3/linux/Documentation/dvb/ci.txt
this CAM should work.
I'm using kernel 2.6.10.
Any help would be greatly
32 matches
Mail list logo
