On 01:19 Sat 31 Jan 2009, Jan Grmela wrote:
> I've bought some cheap DVB-T USB dongle at eBay last month but after
> some unsuccessful tries to get it working, I've figured out that
> there's no Linux driver for the device available since the chipset is
> quite new. There are a lot of other people
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 6/6] Add support for Sony imx046 to OMAP zoom2
board.
Support for the Sony IMX046 sensor on the OMAP Zoom2 board.
Signed-off-by: Dominic Curran
---
arch/arm/configs/omap_zoom2_defconfig |1
arch/arm/mach-omap2/board-zoom2.c | 206 +++
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 5/6] ZOOM2: Rename the zoom2 i2c struct.
Rename i2c structures to something sensible.
This patch is not specific for imx046 sensor.
Do this in preparation for i2c changes for imx046 sensor.
Signed-off-by: Greg Hofer
Signed-off-by: Dominic Curran
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 4/6] Add support for Sony imx046 to OMAP3430 SDP
board.
Support for the Sony IMX046 sensor on the OMAP3430 SDP board.
Signed-off-by: Greg Hofer
Signed-off-by: Dominic Curran
---
arch/arm/mach-omap2/board-3430sdp.c | 197 +
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 3/6] IMX046: Add support for Sony imx046 sensor.
This patch adds the driver files for the Sony IMX046 8MP camera sensor.
Driver sets up the sensor to send frame data via the MIPI CSI2 i/f.
Sensor is setup to output the following base sizes:
- 328
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 2/6] Increase isp workaround buffer size for 8MP
sensor.
A temporary buffer is created to hold the image while it is written by
Previewer module and then read by Resizer module. This is called LSC
Workaround. To take into account the Sony IMX046
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 1/6] CSI2: Add function to change number of data
lanes used.
Add new CSI2 function.
New function is isp_csi2_complexio_lanes_count().
Sets the number of CSI2 data lanes that should be used.
Signed-off-by: Dominic Curran
Signed-off-by: Greg Hofe
From: Dominic Curran
Subject: [OMAPZOOM][PATCH v2 0/6] Add support for Sony imx046 sensor.
This set of patches adds support for the Sony IMX046 camera.
Submitting version 2 with comments from:
- Vaibhav Hiremath
- Hans Verkuil
Driver supports:
- Sensor output format RAW10 (YUV conversion thr
On Fri, Jan 30, 2009 at 8:58 AM, Mauro Carvalho Chehab
> Devin,
>
> I have one bttv hardware installed here available for testing. This one has 4
> bttv chips and uses 2 different board entries. I intend to test the changeset
> before applying. Anyway, it is good if more people could test it, espec
(This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.)
Results of the daily build of v4l-dvb:
date:Fri Jan 30 19:00:06 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 10402:3541eb5b56f7
gcc version: gcc
Hi Manu,
Hello together,
in the meantime I was able to test the device on windows. It works
without any problems for over an hour.
Also I tried again different SAT- und USB-cables.
Also with all other USB-devices dettached - the error still comes.
First I'm getting "TS continuity errors"
and
Hi Everybody,
i realized that i did not give enough Information in the last mail. I
added a page on the v4l-wiki about the above device, its here:
http://linuxtv.org/wiki/index.php/Technisat_SkyStar_USB_2_HD_CI
There you can find the usb-id. What should i do to get more information
of the device
On Fri, 30 Jan 2009 08:27:20 -0500
Devin Heitmueller wrote:
> On Fri, Jan 30, 2009 at 4:20 AM, Trent Piepho wrote:
> > On Thu, 29 Jan 2009, Devin Heitmueller wrote:
> >> On Thu, Jan 29, 2009 at 8:19 PM, Trent Piepho wrote:
> >> > I haven't been able to test this code. It seems my bt848 card do
Mauro,
Please pull from
http://mercurial.intuxication.org/hg/v4l-dvb-commits/v4l-dvb-commits
for the following changeset:
01/01: Bug fix: Restore HVR-4000 tuning.
http://mercurial.intuxication.org/hg/v4l-dvb-commits/v4l-dvb-commits?cmd=changeset;node=0d95f94028cb
cx24116.c |7 ++-
1
On Fri, Jan 30, 2009 at 4:20 AM, Trent Piepho wrote:
> On Thu, 29 Jan 2009, Devin Heitmueller wrote:
>> On Thu, Jan 29, 2009 at 8:19 PM, Trent Piepho wrote:
>> > I haven't been able to test this code. It seems my bt848 card doesn't work
>> > with my SATA controller and I sort of need the latter
On Freitag, 30. Januar 2009, Carsten Meier wrote:
> Am Fri, 30 Jan 2009 12:51:03 +0100
> >
> > One way of asking udev is this:
> > udevadm info -q path -n /dev/dvb/adapter0/frontend0
> >
> > Regards
> > Matthias
>
> Ok, then I think I'm gonna use it... :) It's much more simple than
> struggling thr
Trent Piepho wrote:
On Thu, 29 Jan 2009, Devin Heitmueller wrote:
On Thu, Jan 29, 2009 at 8:19 PM, Trent Piepho wrote:
I haven't been able to test this code. It seems my bt848 card doesn't work
with my SATA controller and I sort of need the latter to access the
harddrive. But I think
Am Fri, 30 Jan 2009 12:51:03 +0100
schrieb Matthias Schwarzott :
> On Freitag, 30. Januar 2009, Carsten Meier wrote:
> > Am Fri, 30 Jan 2009 03:07:07 +0100
> >
> > schrieb hermann pitton :
> > > Hi,
> > >
> > > Am Mittwoch, den 28.01.2009, 16:46 +0100 schrieb Carsten Meier:
> > > > Hello again,
>
On Freitag, 30. Januar 2009, Carsten Meier wrote:
> Am Fri, 30 Jan 2009 03:07:07 +0100
>
> schrieb hermann pitton :
> > Hi,
> >
> > Am Mittwoch, den 28.01.2009, 16:46 +0100 schrieb Carsten Meier:
> > > Hello again,
> > >
> > > now I've managed to obtain syfs-pathes for v4l2-devices. But what
> > >
Am Fri, 30 Jan 2009 03:07:07 +0100
schrieb hermann pitton :
> Hi,
>
> Am Mittwoch, den 28.01.2009, 16:46 +0100 schrieb Carsten Meier:
> > Hello again,
> >
> > now I've managed to obtain syfs-pathes for v4l2-devices. But what
> > about dvb? I haven't found something like bus_info in the
> > dvb-a
hey,
i have a avermedia hc82. This one should be working with the saa716x
driver, but it isnt. Im trying to get it working on a 64bit Ubuntu
System. I installed the latest driver and loaded kernel moduls
saa716x_core and saa716x_hybrid, but there still is no /dev/dvb
directory.
The output of lsmo
On Fri, 30 Jan 2009, morimoto.kunin...@renesas.com wrote:
>
> Dear Guennadi
>
> > > On my opinion, not only calling set_bus_param but also
> > > try_fmt is important for tw9910.
> > > Because tw9910 needs "INTERLACE" mode, and sh_mobile_ceu
> > > sets "is_interlace flag" in try_fmt.
> >
> > Ooh
On Thu, 29 Jan 2009, Devin Heitmueller wrote:
> On Thu, Jan 29, 2009 at 8:19 PM, Trent Piepho wrote:
> > I haven't been able to test this code. It seems my bt848 card doesn't work
> > with my SATA controller and I sort of need the latter to access the
> > harddrive. But I think everything should
Signed-off-by: Kuninori Morimoto
---
drivers/media/video/sh_mobile_ceu_camera.c |7 +++
include/media/sh_mobile_ceu.h |2 ++
2 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c
b/drivers/media/video/sh_mobile_ceu_cam
Signed-off-by: Kuninori Morimoto
---
include/media/soc_camera.h |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 7440d92..2c7ecdf 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -23
Signed-off-by: Kuninori Morimoto
Signed-off-by: Magnus Damm
---
drivers/media/video/sh_mobile_ceu_camera.c | 27 +--
include/media/sh_mobile_ceu.h |5 +++--
2 files changed, 28 insertions(+), 4 deletions(-)
diff --git a/drivers/media/video/sh_mobile_c
Signed-off-by: Kuninori Morimoto
---
drivers/media/video/tw9910.c | 13 +
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 1a9c6fd..57027c0 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media
Dear Guennadi
> > On my opinion, not only calling set_bus_param but also
> > try_fmt is important for tw9910.
> > Because tw9910 needs "INTERLACE" mode, and sh_mobile_ceu
> > sets "is_interlace flag" in try_fmt.
>
> Ooh, this is wrong. As we discussed before - try_fmt shall not perform any
> co
On Fri, 30 Jan 2009, morimoto.kunin...@renesas.com wrote:
> On my opinion, not only calling set_bus_param but also
> try_fmt is important for tw9910.
> Because tw9910 needs "INTERLACE" mode, and sh_mobile_ceu
> sets "is_interlace flag" in try_fmt.
Ooh, this is wrong. As we discussed before - try_
On Thursday 29 January 2009 22:59:13 Trent Piepho wrote:
> On Thu, 29 Jan 2009, Hans Verkuil wrote:
> > On Thursday 29 January 2009 08:44:20 DongSoo Kim wrote:
> > > Hello.
> > >
> > > > +#define VIDIOC_S_COLOR_SPACE_CONV _IOW('V', 83, struct
> > > > v4l2_color_space_conversion) +#define VIDIO
Dear Guennadi
Thank you for checking patch.
> camera - you will see, that almost all of them have a test "if (pixfmt),"
> i.e., they have to differentiate between the two cases. And not only
(snip)
> cropping for both, but the recently added mt9t031 does support scaling,
> so, it is indeed im
31 matches
Mail list logo
