RFC: PATCH: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board calls

2009-06-11 Thread Hans Verkuil
As per Mauro's request here is the patch adding the new core functionality. To quote from my original pull request: This time I've only added new functions and left the existing ones in place. I did add a bit of code to the existing v4l2_i2c_new_(probed_)subdev functions to call the new

Re: pull requests x patches at linux-media ML - Was: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-subdev2

2009-06-11 Thread Guennadi Liakhovetski
Hi Mauro, thanks for replying and for the explanation. I'll skip most of your message, and just keep the bits I'd like to reply to. On Wed, 10 Jun 2009, Mauro Carvalho Chehab wrote: The same happens here: All patches added at the staging tree are sent to linuxtv-commits ML. So, they are there

Re: [PATCH] ov511.c: video_register_device() return zero on success

2009-06-11 Thread Hans Verkuil
On Thursday 11 June 2009 06:40:14 Mauro Carvalho Chehab wrote: Em Wed, 10 Jun 2009 22:39:51 -0300 Mauro Carvalho Chehab mche...@redhat.com escreveu: Em Sun, 31 May 2009 14:41:52 +0800 Figo.zhang figo1...@gmail.com escreveu: video_register_device() return zero on success, it would not

About V4L2_MEMORY_OVERLAY

2009-06-11 Thread Dongsoo, Nathaniel Kim
Hello everyone, What I'm curious is about what is V4L2_MEMORY_OVERLAY for. Even though I have been using overlay capability before, I always used V4L2_MEMORY_MMAP instead of that. And our v4l2 api document tells nothing about V4L2_MEMORY_MMAP (only [todo] is left..OMG ;-() But looking into

Re: [PATCH] ov511.c: video_register_device() return zero on success

2009-06-11 Thread Figo.zhang
On Thu, 2009-06-11 at 01:40 -0300, Mauro Carvalho Chehab wrote: Em Wed, 10 Jun 2009 22:39:51 -0300 Mauro Carvalho Chehab mche...@redhat.com escreveu: Em Sun, 31 May 2009 14:41:52 +0800 Figo.zhang figo1...@gmail.com escreveu: video_register_device() return zero on success, it would

Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-subdev2

2009-06-11 Thread Guennadi Liakhovetski
On Wed, 10 Jun 2009, Mauro Carvalho Chehab wrote: Em Wed, 10 Jun 2009 23:36:32 +0200 (CEST) Guennadi Liakhovetski g.liakhovet...@gmx.de escreveu: someone writes a script to intercept all hg pull requests from lmml (procmail rule), forward that mail to a special media-patch list, and

[PATCH/RFC 0/4] various filter controls

2009-06-11 Thread Guennadi Liakhovetski
Hi all I asked already before what controls to use for various image filters, have only got replies from one person (thanks, Nate), so, here come patches. One of them, adding the missing control could be applied, I think, if the affected file hasn't changed too much in the last month. Others

[PATCH 1/4] V4L2: add a new V4L2_CID_BAND_STOP_FILTER integer control

2009-06-11 Thread Guennadi Liakhovetski
Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches the band-stop filter off, or sets it to a certain strength. Signed-off-by: Guennadi Liakhovetski g.liakhovet...@gmx.de --- include/linux/videodev2.h |4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff

[PATCH 2/4] ov772x: implement a band-stop filter support

2009-06-11 Thread Guennadi Liakhovetski
The V4L2_CID_BAND_STOP_FILTER control is used to switch the Banding Filter on OV772x cameras on and off and to set the minimum AEC value in BDBASE register. BDBASE default value is 0xff, which makes the use of the filter practically unnoticeable. Reducing BDBASE increases the effect, which may

[PATCH 3/4] soc-camera: add support for camera-host controls

2009-06-11 Thread Guennadi Liakhovetski
Until now soc-camera only supported client (sensor) controls. This patch enables camera-host drivers to implement their own controls too. Signed-off-by: Guennadi Liakhovetski g.liakhovet...@gmx.de --- drivers/media/video/soc_camera.c | 24 include/media/soc_camera.h

[PATCH 4/4] sh_mobile_ceu_camera: add a control for the camera low-pass filter

2009-06-11 Thread Guennadi Liakhovetski
Use the V4L2_CID_SHARPNESS control to switch SH-mobile camera low-pass filter. Signed-off-by: Guennadi Liakhovetski g.liakhovet...@gmx.de --- Is this a suitable control for this filter? drivers/media/video/sh_mobile_ceu_camera.c | 54 +++- 1 files changed, 53

Re: [PATCH] flexcop-pci: add suspend/resume support

2009-06-11 Thread Patrick Boettcher
Hi Matthias, On Tue, 26 May 2009, Matthias Schwarzott wrote: This patch adds suspend/resume support to flexcop-pci driver. I could only test this patch with the bare card, but without having a DVB-S signal. I checked it with and without running szap (obviously getting no lock). It works fine

Re: dib0700 Nova-TD-Stick problem

2009-06-11 Thread Patrick Boettcher
Hi Soeren, On Wed, 3 Jun 2009, soeren.m...@stud.uni-hannover.de wrote: Soeren.Moch wrote: For a few weeks I use a Nova-TD-Stick and was annoyed with dvb stream errors, although the demod bit-error-rate (BER/UNC) was zero. I could track down this problem to dib0700_streaming_ctrl: When one

Re: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Hans Verkuil
Karicheri, Muralidharan a écrit : We need streaming capability in the driver. This is how our driver works with mt9t031 sensor raw-bus (10 bit) vpfe-capture - mt9t031 driver || V

Re: PULL request - http://linuxtv.org/hg/~pb/v4l-dvb/

2009-06-11 Thread Patrick Boettcher
Hi Trent, On Wed, 27 May 2009, Trent Piepho wrote: On Tue, 26 May 2009, Patrick Boettcher wrote: MHz to 161 Mhz as welll as 439-447 MHz. Probably wrong. My guess is the data sheet says, low band 48 to 154 MHz, mid band 161 MHz to 439 MHz, etc., where 154 is the frequency of the last channel

Re: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Hans de Goede
On 06/11/2009 11:33 AM, Hans Verkuil wrote: On 06/11/2009 10:35 AM, Hans Verkuil wrote: snip (a lot) Hmm, Why would we want the *application* to set things like this *at all* ? with sensors hsync and vsync and other timing are something between the bridge and the sensor, actaully in my

About v4l2 output interface

2009-06-11 Thread xie
Dear Dongsoo Nathaniel ~~ In the spec , I have readed this sentence : Video output devices encode stills or image sequences as analog video signal. Can you give me a function-example about output interface in real life ~~ ? Thanks ~ Best regards ~!~ -- To unsubscribe from this list: send the

About v4l2 output interface

2009-06-11 Thread xie
Dear Dongsoo Nathaniel ~~ Does the capture interface get the image and the output interface display the image ~ ? Best regards ~ -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at

Re: About v4l2 output interface

2009-06-11 Thread Dongsoo, Nathaniel Kim
Sorry, I have no idea about that. I have never been that far. The only thing I ever heard about v4l2 output, is on ELC 2009 presentation list. You can find at following URL: http://tree.celinuxforum.org/CelfPubWiki/ELC2009Presentations Just look for Matthew Porter's presentation. Or maintainer

I wish you good luck everyday

2009-06-11 Thread xie
Dear Dongsoo, Nathaniel ~~ Thanks very much for your help ~~ I am very Sorry to have taken up so much of your time and you always be so patient. You must be an angel ~~ I am making progress with the help of yours ~ I wish you good luck everyday with all my heart ~~ 在 2009-06-11四的 19:21

Re: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Hans Verkuil
On 06/11/2009 11:33 AM, Hans Verkuil wrote: On 06/11/2009 10:35 AM, Hans Verkuil wrote: snip (a lot) Hmm, Why would we want the *application* to set things like this *at all* ? with sensors hsync and vsync and other timing are something between the bridge and the sensor, actaully in

Re: dib0700 Nova-TD-Stick problem

2009-06-11 Thread Soeren . Moch
Hi Patrick! Patrick Boettcher wrote: Hi Soeren, For a few weeks I use a Nova-TD-Stick and was annoyed with dvb stream errors, although the demod bit-error-rate (BER/UNC) was zero. I could track down this problem to dib0700_streaming_ctrl: When one channel is streaming and the other channel is

[PATCH v2] tuner-xc2028: Fix 7 MHz DVB-T

2009-06-11 Thread Andy Walls
All, The following patch should fix 7 MHz DVB-T with the XC3028 using the DTV7 firmware from the xc3028-v27.fw firmware image. Comments? Regards, Andy Walls Signed-off-by: Andy Walls awa...@radix.net Tested-by: Terry Wu terrywu2...@gmail.com diff -r fad35ab59848

Re: [PATCH] soc_camera: Fix debug output of supported formats count

2009-06-11 Thread Guennadi Liakhovetski
On Thu, 2 Apr 2009, Stefan Herbrechtsmeier wrote: The supported formats count must be set to 0 after debug output right before the second pass. Hi Stefan, could you please resend with your Sob? Thanks Guennadi diff --git a/linux/drivers/media/video/soc_camera.c

Re: [PATCH 3/4] soc-camera: add support for camera-host controls

2009-06-11 Thread Dongsoo, Nathaniel Kim
Hello Guennadi, It's a very interesting patch. Actually some camera interfaces support for various image effects and I was wondering how to use them in SoC camera subsystem. But here is a question. Is it possible to make a choice with the same CID between icd and ici? I mean, if both of camera

Re: [PATCH] ov511.c: video_register_device() return zero on success

2009-06-11 Thread Mauro Carvalho Chehab
Em Thu, 11 Jun 2009 08:36:00 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: Since I made that change I'm willing to look at this. Some comments definitely need improving at the least. Thanks! Since the behavior changed, it is important to better document it. Also ivtv and cx18 rely on the

Re: [PATCH] ov511.c: video_register_device() return zero on success

2009-06-11 Thread Hans Verkuil
Em Thu, 11 Jun 2009 08:36:00 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: Since I made that change I'm willing to look at this. Some comments definitely need improving at the least. Thanks! Since the behavior changed, it is important to better document it. Also ivtv and cx18 rely on

Re: [PATCH 1/4] V4L2: add a new V4L2_CID_BAND_STOP_FILTER integer control

2009-06-11 Thread Guennadi Liakhovetski
On Thu, 11 Jun 2009, Laurent Pinchart wrote: Hi Guennadi, On Thursday 11 June 2009 09:12:37 Guennadi Liakhovetski wrote: Add a new V4L2_CID_BAND_STOP_FILTER integer control, which either switches the band-stop filter off, or sets it to a certain strength. I'm quoting your e-mail from

[PATCH 1/4] lgs8gxx: lgs8913 fake signal strength option default on

2009-06-11 Thread David Wong
lgs8gxx: lgs8913 fake signal strength option default on. Original calculation is too slow. Signed-off-by: David T.L. Wong davidtlwong at gmail.com diff -r ed3781a79c73 -r b13db1935c48 linux/drivers/media/dvb/frontends/lgs8gxx.c --- a/linux/drivers/media/dvb/frontends/lgs8gxx.c Sat Jun 06 16:31:34

[PATCH 3/4] lgs8gxx: add lgs8g75 support

2009-06-11 Thread David Wong
lgs8gxx: add lgs8g75 demodulator support Signed-off-by: David T.L. Wong davidtlwong at gmail.com diff -r af8ce23f588e -r a92510aad9e2 linux/drivers/media/dvb/frontends/lgs8gxx.c --- a/linux/drivers/media/dvb/frontends/lgs8gxx.c Thu Jun 11 19:05:08 2009 +0800 +++

[PATCH 4/4] cx23885: add card Magic-Pro ProHDTV Extreme 2

2009-06-11 Thread David Wong
cx23885: add card Magic-Pro ProHDTV Extreme 2 PCI-E. Signed-off-by: David T.L. Wong davidtlwong at gmail.com diff -r a92510aad9e2 -r 7195cfbca974 linux/drivers/media/video/cx23885/cx23885-cards.c --- a/linux/drivers/media/video/cx23885/cx23885-cards.c Thu Jun 11 19:07:15 2009 +0800 +++

RE: [PATCH] adding support for setting bus parameters in sub device

2009-06-11 Thread Karicheri, Muralidharan
Why force all platforms to set it if the driver is perfectly capable do this itself? As I said - this is not a platform-specific feature, it's chip-specific. What good would it make to have all platforms using mt9t031 to specify, that yes, the chip can use both falling and rising pclk edge,

Re: pull requests x patches at linux-media ML - Was: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-subdev2

2009-06-11 Thread Mauro Carvalho Chehab
Em Thu, 11 Jun 2009 08:23:37 +0200 (CEST) Guennadi Liakhovetski g.liakhovet...@gmx.de escreveu: Hi Mauro, thanks for replying and for the explanation. I'll skip most of your message, and just keep the bits I'd like to reply to. On Wed, 10 Jun 2009, Mauro Carvalho Chehab wrote: The same

RE: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Karicheri, Muralidharan
Hi, In our experience, I have following cases where we need to set the device to capture/display at certain resolution and fps. Capture side - 1) IP Netcam applications. If the solution uses Micron sensors such as MT9T001/031/P031 etc, application will require to do streaming at

RE: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Karicheri, Muralidharan
- video streaming devices like the davinci videoports where you can hook up HDTV receivers or FPGAs: here you definitely need a new API to setup the streaming parameters, and you want to be able to do that from the application as well. Actually, sensors are also hooked up to these devices

RE: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Karicheri, Muralidharan
On Wed, 10 Jun 2009, Karicheri, Muralidharan wrote: So how do I know what frame-rate I get? Sensor output frame rate depends on the resolution of the frame, blanking, exposure time etc. This is not supported. I am still not clear. You had said in an earlier email that it can support

RE: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Guennadi Liakhovetski
On Thu, 11 Jun 2009, Karicheri, Muralidharan wrote: On Wed, 10 Jun 2009, Karicheri, Muralidharan wrote: So how do I know what frame-rate I get? Sensor output frame rate depends on the resolution of the frame, blanking, exposure time etc. This is not supported. I am still not clear.

RE: mt9t031 (was RE: [PATCH] adding support for setting bus parameters in sub device)

2009-06-11 Thread Karicheri, Muralidharan
I am sorry, I do not know how I can explain myself clearer. Thanks for helping me to understand better :) Yes, you can stream video with mt9t031. No, you neither get the framerate measured by the driver nor can you set a specific framerate. Frames are produced as fast as it goes, depending on

[PATCH 5/10 - v2] ccdc types used across ccdc modules for vpfe capture driver

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com common types used across CCDC modules No change from last version Reviewed By Hans Verkuil. Reviewed By Laurent Pinchart. Signed-off-by: Muralidharan Karicheri m-kariche...@ti.com --- Applies to v4l-dvb repository

[PATCH 6/10 - v2] Makefile and config files for vpfe capture driver

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com Makefile and config files for the driver This adds Makefile and Kconfig changes to build vpfe capture driver. Added configuration variable for vpss driver based on last review Reviewed By Hans Verkuil. Reviewed By Laurent

[PATCH 8/10 - v2] DM6446 platform changes for vpfe capture driver

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com DM644x platform and board setup This adds plarform and board setup changes required to support vpfe capture driver on DM644x Added registration of vpss platform driver based on last comment Reviewed By Hans Verkuil. Reviewed By

[PATCH 7/10 - v2] DM355 platform changes for vpfe capture driver

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com DM355 platform and board setup This has platform and board setup changes to support vpfe capture driver for DM355 EVMs. Added registration of vpss platform driver based on last review Reviewed By Hans Verkuil. Reviewed By Laurent

[PATCH 10/10 - v2] common vpss module for video drivers

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com common voss module for video drivers This is a new module added for vpss library functions that are used for configuring vpss system module. All video drivers will include vpss.h header file and call functions defined in this

[PATCH 9/10 - v2] remove outdated video driver files of dm6446

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com Remove outdated driver files from davinci git tree No change from last patch Reviewed By Hans Verkuil. Reviewed By Laurent Pinchart. Signed-off-by: Muralidharan Karicheri m-kariche...@ti.com --- Applies to Davinci GIT Tree

[PATCH 4/10 - v2] dm644x ccdc module for vpfe capture driver

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com DM644x CCDC hw module This is the hw module for DM644x CCDC. This registers with the vpfe capture driver and provides a set of hw_ops to configure CCDC for a specific decoder device connected to the VPFE Following are some of the

[PATCH 3/10 - v2] dm355 ccdc module for vpfe capture driver

2009-06-11 Thread m-karicheri2
From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com DM355 CCDC hw module Adds ccdc hw module for DM355 CCDC. This registers with the bridge driver a set of hw_ops for configuring the CCDC for a specific decoder device connected to vpfe. Following are some of the major comments

Re: Terratec DT USB XS Diversity/DiB0070+vdr: URB status: Value too large for defined data type+USB reset

2009-06-11 Thread Marco Borm
Hi Patrick, FYI: I tried 2.6.30 now and its still not working. Marco Patrick Boettcher wrote: Hi Marco, On Tue, 2 Jun 2009, Marco Borm wrote: Definitely interesting. This is a known issue for the dib0700 device, which happens on some USB host controllers. Actually which one do you use?

[cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS

2009-06-11 Thread Hans Verkuil
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below. Results of the daily build of v4l-dvb: date:Thu Jun 11 19:00:03 CEST 2009 path:http://www.linuxtv.org/hg/v4l-dvb changeset: 11930:ed3781a79c73 gcc version: gcc

[PATCH] dvb: Fix broken link in get_dvb_firmware for nxt2004 (A180)

2009-06-11 Thread Jan Ceuleers
Due to a reorganisation of AVermedia's websites, get_dvb_firmware no longer works for nxt2004. Fix it. Signed-off-by: Jan Ceuleers jan.ceule...@computer.org --- a/Documentation/dvb/get_dvb_firmware.orig2009-06-07 14:38:20.0 +0200 +++ b/Documentation/dvb/get_dvb_firmware

Re: s5h1411_readreg: readreg error (ret == -5)

2009-06-11 Thread Mike Isely
On Thu, 11 Jun 2009, Steven Toth wrote: Mike Isely wrote: On Sun, 7 Jun 2009, Roger wrote: From looking at linux/drivers/media/dvb/frontends/s5h1411.c, The s5h1411_readreg wants to see 2 but is getting -5 from the i2c bus. --- Snip --- s5h1411_readreg: readreg error

Re: [PATCH v2] tuner-xc2028: Fix 7 MHz DVB-T

2009-06-11 Thread Mauro Carvalho Chehab
Em Thu, 11 Jun 2009 06:57:50 -0400 Andy Walls awa...@radix.net escreveu: All, The following patch should fix 7 MHz DVB-T with the XC3028 using the DTV7 firmware from the xc3028-v27.fw firmware image. DTV7 and DTV78 support were added and tested in Australia by Christopher Pascoe, as can be

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Hans Verkuil
On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote: Hi all, With Linux 2.6.30 the BTTV driver for my WinTV card claims bttv0: audio absent, no audio device found! and audio does not work. This worked up to and including 2.6.29. Is this a known issue? Does anyone have a fix

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Hans Verkuil
On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote: On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote: Hi all, With Linux 2.6.30 the BTTV driver for my WinTV card claims bttv0: audio absent, no audio device found! and audio does not work. This worked up to and

Re: [PATCH 9/10 - v2] remove outdated video driver files of dm6446

2009-06-11 Thread Kevin Hilman
m-kariche...@ti.com writes: From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com Remove outdated driver files from davinci git tree Can you add another patch that removes the old Kconfig/Makfile entries as well (of course, this only applied to davinci git and not mainline.) Also,

Re: [PATCH 7/10 - v2] DM355 platform changes for vpfe capture driver

2009-06-11 Thread David Brownell
On Thursday 11 June 2009, m-kariche...@ti.com wrote: +   I2C_BOARD_INFO(tvp5146, TVP5146_I2C_ADDR), Minor nit: just use 0x5d instead of defining TVP5146_I2C_ADDR. Fix in a v3, iff you make one. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a

Re: [PATCH 0/10 - v2] ARM: DaVinci: Video: DM355/DM6446 VPFE Capture driver

2009-06-11 Thread David Brownell
On Thursday 11 June 2009, m-kariche...@ti.com wrote: VPFE Capture driver for DaVinci Media SOCs :- DM355 and DM6446 This is the version v2 of the patch series. This is the reworked version of the driver based on comments received against the last version of the patch. I'll be glad to see

[PULL] http://linuxtv.org/hg/~dougsland/video4linux

2009-06-11 Thread Douglas Schilling Landgraf
Hello Mauro, Please pull from http://linuxtv.org/hg/~dougsland/video4linux for the following: - dvb: Fix broken link in get_dvb_firmware for nxt2004 (A180) - tvp514x: try_count off by one - v4l: generate KEY_CAMERA instead of BTN_0 key events on input

2.6.30: missing audio device in bttv

2009-06-11 Thread Udo A. Steinberg
Hi all, With Linux 2.6.30 the BTTV driver for my WinTV card claims bttv0: audio absent, no audio device found! and audio does not work. This worked up to and including 2.6.29. Is this a known issue? Does anyone have a fix or a patch for me to try? Cheers, - Udo Output for

Re: cx18, s5h1409: chronic bit errors, only under Linux

2009-06-11 Thread David Ward
On 06/10/2009 10:32 AM, Steven Toth wrote: David Ward wrote: Comcast checked the outlet on channels 2 (41 dB) and 83 (39 dB). I looked afterwards and saw that the first of those is analog programming, but the second just appears as analog noise on my TV set. (??) I asked them to check a

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Udo A. Steinberg
On Thu, 11 Jun 2009 22:18:10 +0200 Hans Verkuil (HV) wrote: HV On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote: HV Hi all, HV HV With Linux 2.6.30 the BTTV driver for my WinTV card claims HV HVbttv0: audio absent, no audio device found! HV HV and audio does not work. This

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Hans Verkuil
On Thursday 11 June 2009 23:38:17 Udo A. Steinberg wrote: On Thu, 11 Jun 2009 22:18:10 +0200 Hans Verkuil (HV) wrote: HV On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote: HV Hi all, HV HV With Linux 2.6.30 the BTTV driver for my WinTV card claims HV HV bttv0: audio

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Mauro Carvalho Chehab
Em Thu, 11 Jun 2009 22:22:50 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote: On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote: Hi all, With Linux 2.6.30 the BTTV driver for my WinTV card claims bttv0: audio

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Hans Verkuil
On Friday 12 June 2009 00:20:52 Mauro Carvalho Chehab wrote: Em Thu, 11 Jun 2009 22:22:50 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote: On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote: Hi all, With Linux 2.6.30

Re: s5h1411_readreg: readreg error (ret == -5)

2009-06-11 Thread Roger
On Thu, 2009-06-11 at 13:48 -0500, Mike Isely wrote: On Thu, 11 Jun 2009, Steven Toth wrote: Mike Isely wrote: On Sun, 7 Jun 2009, Roger wrote: From looking at linux/drivers/media/dvb/frontends/s5h1411.c, The s5h1411_readreg wants to see 2 but is getting -5 from the i2c bus.

Re: PULL request - http://linuxtv.org/hg/~pb/v4l-dvb/

2009-06-11 Thread Trent Piepho
On Thu, 11 Jun 2009, Patrick Boettcher wrote: On Wed, 27 May 2009, Trent Piepho wrote: On Tue, 26 May 2009, Patrick Boettcher wrote: Does this patch to fix these problems look ok? In fact, everything looks correct in my eyes. I'll ask Mauro to pull any minute from now. I even have an

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Udo A. Steinberg
On Thu, 11 Jun 2009 23:46:48 +0200 Hans Verkuil (HV) wrote: HV Hmm, my patch needs a bit more work. But to get your setup working try to HV revert the change you made and do just this: HV HV Go to drivers/media/video/Makefile and move this line: HV HV obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o HV

Re: [PATCH 1/10 - v2] vpfe capture bridge driver for DM355 and DM6446

2009-06-11 Thread Alexey Klimov
Hello, Very small suggestion, please see below. On Thu, Jun 11, 2009 at 9:00 PM, m-kariche...@ti.com wrote: From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com Re-sending since previous one missed a file (vpfe_types.h) VPFE Capture bridge driver This is version, v2 of vpfe

Re: [PATCH] ov511.c: video_register_device() return zero on success

2009-06-11 Thread Mauro Carvalho Chehab
Em Thu, 11 Jun 2009 14:39:56 +0800 Figo.zhang figo1...@gmail.com escreveu: in v2, if insmod without specify 'unit_video', it use autodetect video device. if specify the 'unit_video', it will try to detect start from nr. Signed-off-by: Figo.zhang figo1...@gmail.com ---

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Hans Verkuil
On Friday 12 June 2009 00:35:26 Udo A. Steinberg wrote: On Thu, 11 Jun 2009 23:46:48 +0200 Hans Verkuil (HV) wrote: HV Hmm, my patch needs a bit more work. But to get your setup working try to HV revert the change you made and do just this: HV HV Go to drivers/media/video/Makefile and move

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Mauro Carvalho Chehab
Em Fri, 12 Jun 2009 00:26:13 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: On Friday 12 June 2009 00:20:52 Mauro Carvalho Chehab wrote: Em Thu, 11 Jun 2009 22:22:50 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: On Thursday 11 June 2009 22:18:10 Hans Verkuil wrote: On Thursday

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Hans Verkuil
On Friday 12 June 2009 01:07:46 Mauro Carvalho Chehab wrote: Em Fri, 12 Jun 2009 00:26:13 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: On Friday 12 June 2009 00:20:52 Mauro Carvalho Chehab wrote: Em Thu, 11 Jun 2009 22:22:50 +0200 Hans Verkuil hverk...@xs4all.nl escreveu: On

Re: [PATCH 10/10 - v2] common vpss module for video drivers

2009-06-11 Thread Alexey Klimov
Hello, On Thu, Jun 11, 2009 at 9:00 PM, m-kariche...@ti.com wrote: From: Muralidharan Karicheri a0868...@gt516km11.gt.design.ti.com common voss module for video drivers This is a new module added for vpss library functions that are used for configuring vpss system module. All video drivers

Re: [v4l-dvb-maintainer] 2.6.30: missing audio device in bttv

2009-06-11 Thread Udo A. Steinberg
On Fri, 12 Jun 2009 01:01:59 +0200 Hans Verkuil (HV) wrote: HV I've fixed the problem in my original patch. I've attached the new HV version. It works fine with ivtv, the problems with reading the eeprom HV are now fixed. Please test and if it still doesn't work then I'll have HV to install my

GPL code for Omnivision USB video camera available.

2009-06-11 Thread Erik de Castro Lopo
Hi all, I have a driver for a USB video camera that I'd like to see added to the mainline kernel, mainly so I don't have to fix breakage due to constant changes in the kernel :-). The code is GPL and is available here: http://stage.bcode.com/erikd/ovcamchip and the history of this code is

Re: [PATCH 3/4] soc-camera: add support for camera-host controls

2009-06-11 Thread Dongsoo, Nathaniel Kim
Hello Guennadi, So let's assume that camera interface device can process V4L2_CID_SHARPNESS and even external camera device can process that, then according to your patch both of camera interface and external camera device can be issued to process V4L2_CID_SHARPNESS which I guess will make image