MANTIS / STB0899 / STB6100 card ( Twinhan VP-1041): problems locking to transponder

2009-12-29 Thread Leszek Koltunski
Hello linux dvb gurus, I've got the following setup: 1. current Mythbuntu 9.10 ( kernel 2.6.31-16-generic-pae ) 2. current v4l-dvb drivers ( freshly checked out from http://linuxtv.org/hg/v4l-dvb ; I've also tried with Liplianin drivers from http://mercurial.intuxication.org/hg/s2-liplianin

Re: [patch] fix weird array index in zl10036.c

2009-12-29 Thread Matthias Schwarzott
On Montag, 28. Dezember 2009, Dan Carpenter wrote: I was initially concerned about the weird array index (the 2 bumps into the next row of the array). Matthias Schwarzott look at the datasheet and it turns out it should be zl10036_init_tab[1][0] |= 0x01; Signed-off-by: Dan Carpenter

Re: MANTIS / STB0899 / STB6100 card ( Twinhan VP-1041): problems locking to transponder

2009-12-29 Thread Matthias Wächter
Am 29.12.2009 10:38, schrieb Leszek Koltunski: Now , some more info: 1. I've connected a satellite set-top-box to the signal and the STB can tune to and watch channels from both transponders with no problems at all. That IMHO proves that the signal is all right and the problem lies in the

Re: MANTIS / STB0899 / STB6100 card ( Twinhan VP-1041): problems locking to transponder

2009-12-29 Thread Leszek Koltunski
A few specific questions: 1. Am I right thinking that 'dvbstream -c 1 -f 119 -s 27500 ...' should just work? ( i.e. there's no additinal LNB / 22Khz / tone / voltage magic to do? ) 2. Assuming that I am right about the above, do you think it is dvbstream, stb6100, stb0899 or mantis problem?

pull request: http://linuxtv.org/hg/~hgoede/gspca

2009-12-29 Thread Hans de Goede
Hi Mauro, Please pull from: http://linuxtv.org/hg/~hgoede/gspca For: 1) A high priority (should go to 2.6.33) mr97310a driver fix 2) A new driver for streaming from sn9c2028 cams 3) Some gspca documentation updates Regards, Hans -- To unsubscribe from this list: send the line unsubscribe

Siano SMS1140 problem

2009-12-29 Thread sebax75
Hi, I've already worked with different adapters (Pinnacle 320E with em28xx, Intel CE9500B1, Hauppauge Nova-T Stick and SAA7134), and all have worked without big problem reading the howto I've found online; but now I've a new dvb-adapter, and it's a Siano SMS1140. I've found some howto, but I'm

Re: uvcvideo Logitech patch

2009-12-29 Thread Mitar
Hi! Could be, but I'd like to know if increasing the control streaming timeout is required as well. I had some time now and have tested it and it is enough just to increase UVC_CTRL_STREAMING_TIMEOUT to 5000, I left UVC_CTRL_CONTROL_TIMEOUT at 300. And everything seems to work. Mitar -- To

Re: [PATCH] input: imon driver for SoundGraph iMON/Antec Veris IR devices

2009-12-29 Thread Dan Carpenter
I ran smatch (http://repo.or.cz/w/smatch.git) on it and there are some bugs worth fixing. drivers/input/misc/imon.c +331 free_imon_context(7) error: dereferencing freed memory 'context' Move the debug line earlier. drivers/input/misc/imon.c +1812 imon_probe(216) error: dereferencing undefined:

Re: [PATCH] input: imon driver for SoundGraph iMON/Antec Veris IR devices

2009-12-29 Thread Jarod Wilson
On 12/29/2009 12:01 PM, Dan Carpenter wrote: I ran smatch (http://repo.or.cz/w/smatch.git) on it and there are some bugs worth fixing. drivers/input/misc/imon.c +331 free_imon_context(7) error: dereferencing freed memory 'context' Move the debug line earlier. drivers/input/misc/imon.c +1812

RE: [PATCH - v2 4/6] V4L - vpfe_capture - bug fixes and enhancements

2009-12-29 Thread Karicheri, Muralidharan
Hans, If you are okay with this patch, could you please merge this to your -hg tree and send a pull request to Mauro to merge to the linux-next tree? This depends on the previous patch set which is waiting for Mauro's merge. Murali Karicheri Software Design Engineer Texas Instruments Inc.

Re: Which modules for the VP-2033? Where is the module mantis.ko?

2009-12-29 Thread Aljaž Prusnik
On pon, 2009-12-28 at 21:06 +0100, Aljaž Prusnik wrote: On pon, 2009-12-28 at 20:28 +0100, Aljaž Prusnik wrote: On pon, 2009-12-28 at 02:23 +0400, Manu Abraham wrote: Can you please do a lspci -vn for the Mantis card you have ? Also try loading the mantis.ko module with verbose=5 module

[PATCH] IR: Fix sysfs attributes declaration

2009-12-29 Thread Francesco Lavra
Hi, This patch fixes the declaration of the sysfs attributes for IR's, which must be a NULL-terminated array of struct attribute *. Without this patch, my machine crashes when inserting a DVB card. I'm using a 2.6.32 kernel. Regards, Francesco Signed-off-by: Francesco Lavra

Re: [Bugme-new] [Bug 14564] New: capture-example sleeping function called from invalid context at arch/x86/mm/fault.c

2009-12-29 Thread Sean
Alan Stern wrote: The patch doesn't fix anything. The point was to gather enough information to figure out what's going wrong. Without the debug messages, there's no information. Perhaps things will slow down less if you change the new ohci_info() calls in the patch to ohci_dbg(). Or

[cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: OK

2009-12-29 Thread Hans Verkuil
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below. Results of the daily build of v4l-dvb: date:Tue Dec 29 19:00:09 CET 2009 path:http://www.linuxtv.org/hg/v4l-dvb changeset: 13876:0b9c85378d2f gcc version: gcc

Call for Testers: PCTV 340e support

2009-12-29 Thread Devin Heitmueller
Hello All, If there are any users who have been waiting for the PCTV 340e to be supported, there is now a tree available for testing: http://kernellabs.com/hg/~dheitmueller/pctv-340e-2 Comments welcome. More info can be found here: http://www.kernellabs.com/blog/?p=1247 Cheers, Devin --

Fwd: Compro S300 - ZL10313

2009-12-29 Thread Theunis Potgieter
Hi mailing list, I have a problem with my Compro S300 pci card under Linux 2.6.32. I cannot tune with this card and STR/SNRA is very bad compared to my Technisat SkyStar 2 pci card, connected to the same dish. I have this card and are willing to run tests, tested drivers etc to make this work.

Re: [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: OK

2009-12-29 Thread Németh Márton
Hans Verkuil wrote: Detailed results are available here: http://www.xs4all.nl/~hverkuil/logs/Tuesday.log linux-2.6.33-rc2-armv5: ERRORS In file included from command-line:0: /marune/build/v4l-dvb-master/v4l/config-compat.h:4:28: error: linux/autoconf.h: No such file or directory In file

Re: [Bugme-new] [Bug 14564] New: capture-example sleeping function called from invalid context at arch/x86/mm/fault.c

2009-12-29 Thread Alan Stern
On Tue, 29 Dec 2009, Sean wrote: I changed the debug statements to ohci_dbg and I was able to capture the full output with klogd. It is attached. You did not get the full output. That's why I tell people to use dmesg instead of klogd or the kernel log files. If necessary you can always

[PATCH] gspca: make control descriptors constant

2009-12-29 Thread Németh Márton
From: Márton Németh nm...@freemail.hu The ctrls field of struct sd_desc is declared as const in gspca.h. It is worth to initialize the content also with constant values. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // smpl @m@ identifier x;

Re: [PATCH] input: imon driver for SoundGraph iMON/Antec Veris IR devices

2009-12-29 Thread Dmitry Torokhov
On Tue, Dec 29, 2009 at 12:04:00AM -0500, Jarod Wilson wrote: On Dec 28, 2009, at 4:31 AM, Dmitry Torokhov wrote: Hm, will this work on big-endian? Good question. Not sure offhand. Probably not. Unfortunately, the only devices I have to test with at the moment are integrated into cases

Re: [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: OK

2009-12-29 Thread Mauro Carvalho Chehab
Németh Márton wrote: Hans Verkuil wrote: Detailed results are available here: http://www.xs4all.nl/~hverkuil/logs/Tuesday.log linux-2.6.33-rc2-armv5: ERRORS In file included from command-line:0: /marune/build/v4l-dvb-master/v4l/config-compat.h:4:28: error: linux/autoconf.h: No such

Re: [cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: OK

2009-12-29 Thread Németh Márton
Mauro Carvalho Chehab írta: Németh Márton wrote: Hans Verkuil wrote: Detailed results are available here: http://www.xs4all.nl/~hverkuil/logs/Tuesday.log linux-2.6.33-rc2-armv5: ERRORS In file included from command-line:0: /marune/build/v4l-dvb-master/v4l/config-compat.h:4:28: error:

Re: [Bugme-new] [Bug 14564] New: capture-example sleeping function called from invalid context at arch/x86/mm/fault.c

2009-12-29 Thread Sean
Alan Stern wrote: You did not get the full output. That's why I tell people to use dmesg instead of klogd or the kernel log files. If necessary you can always increase the size of the dmesg log buffer by changing CONFIG_LOG_BUF_SHIFT. I tend to set it to 18; you might want to go even higher.

Compro VideoMate U80 DVB-T USB 2.0 High Definition Digital TV Stick

2009-12-29 Thread drappa
Hi All http://www.comprousa.com/en/product/u80/u80.html I'd be grateful if anyone can tell me if this device is supported yet, and if so, any pointers to getting it working. Thanks Drappa -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to

Re: [Bugme-new] [Bug 14564] New: capture-example sleeping function called from invalid context at arch/x86/mm/fault.c

2009-12-29 Thread Alan Stern
On Tue, 29 Dec 2009, Sean wrote: Alan, Thanks for the debug patch. I'll send you the dmesg.log output in another email. It is 2MB. Got it. It's not good enough; the initial error occurred before the start of your extract. Here's yet another version of the patch; this one will stop