Re: [PATCH] drivers/media/dvb/dvb-core/dvb_net.c: use %pM to show MAC address

2010-01-07 Thread David Miller
From: H Hartley Sweeten hartl...@visionengravers.com Date: Tue, 5 Jan 2010 09:45:21 -0700 Use the %pM kernel extension to display the MAC address and mask. The only difference in the output is that the output is shown in the usual colon-separated hex notation. Signed-off-by: H Hartley

New init DVB-T file for fr-Saint-Jorioz-1 (Saint-Germain / Talloire)]

2010-01-07 Thread Benoît Pourre
Hello, Here is my complete init dvb file for the new location fr-Saint-Jorioz-1 (Saint-Germain / Talloire). Best regards. Benoît France 2:49000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO:120:130:257 France

Re: [RESEND] Re: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) tuning regression

2010-01-07 Thread Terry Wu
Hi, The 6MHz patch is for Taiwan only. It should not change anything for 7MHz and 8MHz. Terry 2010/1/7 Robert Lowery rglow...@exemail.com.au: On Wed, 2010-01-06 at 14:20 +1100, Robert Lowery wrote: On Mon, 2010-01-04 at 21:27 -0500, Andy Walls wrote: On Mon, 2010-01-04 at 15:27

Re: [RESEND] Re: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) tuning regression

2010-01-07 Thread Terry Wu
Hi, And the 6MHz patch you mentioned is a wrong patch. http://linuxtv.org/hg/v4l-dvb/rev/e6a8672631a0 + if (priv-cur_fw.type DTV6) + offset = 175; + if (priv-cur_fw.type DTV7) + offset = 225; + else

Re: [RESEND] Re: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) tuning regression

2010-01-07 Thread Terry Wu
Hi, The following codes in the 6MHz patch are not for 6MHz. Please read the mchehab's comments. 1.28/* 1.29 - * We must adjust the offset by 500kHz in two cases in order 1.30 - * to correctly center the IF output: 1.31 -

Re: [RESEND] Re: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) tuning regression

2010-01-07 Thread Terry Wu
Hi, You can check the dmesg output to verify which XCEIVE firmware/SCODE is using. For examples, (1). DVB-T 7MHz bandwidth, frequency=177.5MHz and BASE F8MHZ/DTV7 firmware is using, SCODE SCODE DTV7 ZARLINK456/HAS_IF_5260 [ 266.008596] xc2028 0-0061: Loading firmware for type=BASE

RE: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver

2010-01-07 Thread Karicheri, Muralidharan
Kevin, OK, I'm not extremely familar with the whole video architecture here, but are all of these drivers expected to be doing clk_get() and clk_enable()? [MK]Many IPs on DaVinci VPFE would require vpss master clock. So it is better to do the way I have done in my patch. So it is expected that

Re: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver

2010-01-07 Thread Kevin Hilman
Karicheri, Muralidharan m-kariche...@ti.com writes: Kevin, OK, I'm not extremely familar with the whole video architecture here, but are all of these drivers expected to be doing clk_get() and clk_enable()? [MK]Many IPs on DaVinci VPFE would require vpss master clock. So it is better to do

Re: DTV2000 H Plus issues

2010-01-07 Thread istva...@mailbox.hu
On 01/05/2010 02:25 AM, Raena Lea-Shannon wrote: Thanks. Will try again later. By the way, for those who would like to test it, here is a patch based on Devin Heitmueller's XC4000 driver and Mirek Slugen's older patch, that adds support for this card:

[cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: OK

2010-01-07 Thread Hans Verkuil
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below. Results of the daily build of v4l-dvb: date:Thu Jan 7 19:00:02 CET 2010 path:http://www.linuxtv.org/hg/v4l-dvb changeset: 13879:b6b82258cf5e gcc version: gcc

Re: DTV2000 H Plus issues

2010-01-07 Thread Devin Heitmueller
On Thu, Jan 7, 2010 at 2:49 PM, istva...@mailbox.hu istva...@mailbox.hu wrote: On 01/05/2010 02:25 AM, Raena Lea-Shannon wrote: Thanks. Will try again later. By the way, for those who would like to test it, here is a patch based on Devin Heitmueller's XC4000 driver and Mirek Slugen's older

Re: DTV2000 H Plus issues

2010-01-07 Thread istva...@mailbox.hu
On 01/07/2010 09:00 PM, Devin Heitmueller wrote: Could you please do me a favor and rename your firmware file, both in the patch and the file you are redistributing (perhaps as dvb-fe-xc4000-1.4.1-istanv.fw)? I worry that by redistributing a file with the exact same name as the official

RE: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver

2010-01-07 Thread Karicheri, Muralidharan
Kevin, Can I remove it through a separate patch? This patch is already merged in Hans tree. Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-kariche...@ti.com -Original Message- From: Kevin Hilman

Re: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver

2010-01-07 Thread Kevin Hilman
Karicheri, Muralidharan m-kariche...@ti.com writes: Can I remove it through a separate patch? This patch is already merged in Hans tree. Hmm, arch patches should not be merged yet as I have not ack'd them. Kevin -Original Message- From: Kevin Hilman

Re: Compro VideoMate U80 DVB-T USB 2.0 High Definition Digital TV Stick

2010-01-07 Thread Jan Hoogenraad
Can you give us the USB ID (type on the command line: lsusb, and report the output) The U90 has a RTL2831 in it. More info on the driver on: http://www.linuxtv.org/wiki/index.php/Rtl2831_devices drappa wrote: Hi All http://www.comprousa.com/en/product/u80/u80.html I'd be grateful if anyone

building v4l-dvb - compilation error

2010-01-07 Thread Karicheri, Muralidharan
Hi, I have installed mercurial and cloned the v4l-dvb tree. I tried doing a build as per instructions and I get the following error. Since I am in the process of validating my build environment, I am not sure if the following is a genuine build error or due to my environment... Other

RE: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver

2010-01-07 Thread Karicheri, Muralidharan
Arch patches are not usually merged in Hans tree. Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-kariche...@ti.com -Original Message- From: Kevin Hilman [mailto:khil...@deeprootsystems.com] Sent: Thursday, January 07,

Re: IR device at I2C address 0x7a

2010-01-07 Thread dave_a
Daro ghost-rider at aster.pl writes: Hi Jean, Thank you for your answer. It is not the error message itself that bothers me but the fact that IR remote control device is not detected and I cannot use it (I checked it on Windows and it's working). After finding this thread I thought it

Re: [RESEND] Re: DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) tuning regression

2010-01-07 Thread Robert Lowery
Hi Terry, Thanks for your comments, my responses are inline below. Hi, You can check the dmesg output to verify which XCEIVE firmware/SCODE is using. For examples, (1). DVB-T 7MHz bandwidth, frequency=177.5MHz and BASE F8MHZ/DTV7 firmware is using, SCODE SCODE DTV7

Kworld 315U and SAA7113?

2010-01-07 Thread Franklin Meng
After some work I have finally gotten the analog inputs to work with the Kworld 315U device.  I have attached the changes/updates to the em28xx driver. Note: I still don't have analog sound working yet.. I am hoping someone can comment on the changes in saa7115.c.  I added a s_power routine to

Re: Compro VideoMate U80 DVB-T USB 2.0 High Definition Digital TV Stick

2010-01-07 Thread drappa
Jan Hoogenraad wrote: Can you give us the USB ID (type on the command line: lsusb, and report the output) The U90 has a RTL2831 in it. More info on the driver on: http://www.linuxtv.org/wiki/index.php/Rtl2831_devices Hi Jan USB ID is : 185b-0150 Compro I built the driver as per the link

Re: Compro VideoMate U80 DVB-T USB 2.0 High Definition Digital TV Stick

2010-01-07 Thread Jan Hoogenraad
So: it is a Realtek 2831 device. Please first check /lib/udev/rules.d/50-udev-default.rules. There seems to be a generic problem with Karmac there. Look at http://ubuntuforums.org/showthread.php?t=1327337 which gives solution for the problem by installing a new rule:-