Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped scancodes,
but rather return KEY_RESERVED.
This fixes breakage with Ubuntu's input-kbd utility that stopped returning
full keymaps for remote controls.
Tested-by: Mauro Carvalho Chehab
Tested-by: Mark Lord
Signed-off-by: Dmitry Tor
Convert the sh_mobile_ceu_camera driver to the videobuf2 API.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/video/Kconfig|2 +-
drivers/media/video/sh_mobile_ceu_camera.c | 249
2 files changed, 104 insertions(+), 147 deletions(-)
diff
Hi all
This is the first early draft of the soc-camera conversion to the
videobuf2 API. For this RFC I've trivially split the conversion into core
and driver, which, actually, we shouldn't do, because after the core is
converted all the soc-camera host drivers are broken. Ideally, we should
be
videobuf2-memops and videobuf2-core can be compiled as modules, in which
case 3 more symbols from videobuf2-memops.c have to be exported.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/video/videobuf2-memops.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/dri
Convert soc-camera core to the videobuf2 API.
Signed-off-by: Guennadi Liakhovetski
---
drivers/media/video/Kconfig |2 +-
drivers/media/video/soc_camera.c | 53 +
include/media/soc_camera.h | 10 ---
3 files changed, 37 insertions(+), 28
Update:
On Wed, Jan 26, 2011 at 6:35 PM, Bjørn Mork wrote:
>
> Sure is. But even if you get past the build errors, you'll soon
> discover that Terratec "forgot" to include the necessary firmware as
> well. You can find it and some other hints in this thread:
> http://www.vdr-portal.de/board/thr
A few questions that would help to diagnose problems:
What version of the ISP drivers and the MT9V032 driver are you using? Kernel
version?
I'm using the ISP drivers and MT9V032 driver from
git://linuxtv.org/pinchartl/media.git head=media-0006-sensors. My kernel
is 2.6.36.
You could try
On 1/27/2011 2:44 PM, Neil MacMunn wrote:
> When I use media-ctl the pipeline gets configured properly. I can generate
> graphs before and after and see the pipeline change. However, my system hangs
> when I attempt to use yavta. I've also tried outputting to video4.
>
>
>
>
> Does anybody k
On Fri, Jan 28, 2011 at 04:03:07PM -0500, Mark Lord wrote:
> On 11-01-28 03:55 PM, Mark Lord wrote:
> > On 11-01-28 11:42 AM, Dmitry Torokhov wrote:
> >> On Thu, Jan 27, 2011 at 11:53:25AM -0800, Dmitry Torokhov wrote:
> >>> On Thu, Jan 27, 2011 at 01:12:48PM -0500, Mark Lord wrote:
> On 11-01
On 11-01-28 03:55 PM, Mark Lord wrote:
> On 11-01-28 11:42 AM, Dmitry Torokhov wrote:
>> On Thu, Jan 27, 2011 at 11:53:25AM -0800, Dmitry Torokhov wrote:
>>> On Thu, Jan 27, 2011 at 01:12:48PM -0500, Mark Lord wrote:
On 11-01-27 11:39 AM, Dmitry Torokhov wrote:
> ..
> Hmm, what about compi
On 11-01-28 11:42 AM, Dmitry Torokhov wrote:
> On Thu, Jan 27, 2011 at 11:53:25AM -0800, Dmitry Torokhov wrote:
>> On Thu, Jan 27, 2011 at 01:12:48PM -0500, Mark Lord wrote:
>>> On 11-01-27 11:39 AM, Dmitry Torokhov wrote:
..
Hmm, what about compiling with debug and getting a core then?
>>>
>>
Dmitry / Mauro,
I'm encouraged by all of the good dialog happening here,
and regret that I am unable to poke any further at the
issue with ir-keytable for now.
The system in question is now getting rebuilt with new/modern
userspace, and I expect the original issue to "vanish" as a result.
If I do
On Fri, Jan 28, 2011 at 11:25:04AM -0800, Charlie X. Liu wrote:
> 1) Is your driver for ASUS TV tuner right?
I assume it is. I had help from various people in my very long
newsgroup/usenet forum thread in
http://groups.google.com/group/comp.os.linux.hardware/browse_frm/thread/eced1d3cf6497abf
Associate the H.264 GUID with an H.264 pixel format so that frame
and stream based format descriptors with this GUID are recognized
by the UVC video driver.
---
drivers/media/video/uvc/uvc_driver.c |5 +
drivers/media/video/uvc/uvcvideo.h |3 +++
include/linux/videodev2.h
Parse the UVC 1.0 and UVC 1.1 VS_FORMAT_MPEG2TS descriptors.
This a stream based format, so we generate a dummy frame descriptor
with a dummy frame interval range.
---
drivers/media/video/uvc/uvc_driver.c | 41 ++
drivers/media/video/uvc/uvcvideo.h |3 ++
2
1) Is your driver for ASUS TV tuner right?
2) tvtime ( http://tvtime.sourceforge.net/ ) may work for you better, as
it's designed for TV tuner type of capture cards.
3) For V4L/V4L2 compliance test, I like Xawtv better (personally). Though
it's old, it's mature and stable.
Best regards,
Charlie X
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri Jan 28 19:00:14 CET 2011
git master: 1b59be2a6cdcb5a12e18d8315c07c94a624de48f
git media-master: gcc version: i6
On Fri, Jan 28, 2011 at 04:15:51PM -0200, Mauro Carvalho Chehab wrote:
> Em 28-01-2011 15:33, Dmitry Torokhov escreveu:
> > On Fri, Jan 28, 2011 at 03:01:58PM -0200, Mauro Carvalho Chehab wrote:
> >> Em 28-01-2011 14:40, Dmitry Torokhov escreveu:
> >>> On Fri, Jan 28, 2011 at 09:55:58AM -0200, Maur
Em 28-01-2011 15:33, Dmitry Torokhov escreveu:
> On Fri, Jan 28, 2011 at 03:01:58PM -0200, Mauro Carvalho Chehab wrote:
>> Em 28-01-2011 14:40, Dmitry Torokhov escreveu:
>>> On Fri, Jan 28, 2011 at 09:55:58AM -0200, Mauro Carvalho Chehab wrote:
>>
The rc-core register (and the corresponding in
On Fri, Jan 28, 2011 at 03:01:58PM -0200, Mauro Carvalho Chehab wrote:
> Em 28-01-2011 14:40, Dmitry Torokhov escreveu:
> > On Fri, Jan 28, 2011 at 09:55:58AM -0200, Mauro Carvalho Chehab wrote:
>
> >> The rc-core register (and the corresponding input register) is done when
> >> the device detecte
Em 28-01-2011 14:40, Dmitry Torokhov escreveu:
> On Fri, Jan 28, 2011 at 09:55:58AM -0200, Mauro Carvalho Chehab wrote:
>> The rc-core register (and the corresponding input register) is done when
>> the device detected a remote controller, so, it should be safe to register
>> on that point. If not
On Thu, Jan 27, 2011 at 11:53:25AM -0800, Dmitry Torokhov wrote:
> On Thu, Jan 27, 2011 at 01:12:48PM -0500, Mark Lord wrote:
> > On 11-01-27 11:39 AM, Dmitry Torokhov wrote:
> > > On Wed, Jan 26, 2011 at 10:18:53PM -0500, Mark Lord wrote:
> > >> No, it does not seem to segfault when I unload/reloa
On Fri, Jan 28, 2011 at 09:55:58AM -0200, Mauro Carvalho Chehab wrote:
> Em 28-01-2011 07:39, Dmitry Torokhov escreveu:
> > On Thu, Jan 27, 2011 at 04:58:57PM -0200, Mauro Carvalho Chehab wrote:
> >> Em 27-01-2011 15:21, Dmitry Torokhov escreveu:
> >>> On Thu, Jan 27, 2011 at 08:30:00AM -0200, Maur
This patch fixes 2 minor bugs in videobuf2 core:
1. Queue should be reallocated if one change the memory access
method without changing the number of buffers.
2. In case of REQBUFS(0), the request should not be passed to the
driver.
Signed-off-by: Marek Szyprowski
Signed-off-by: Kyungmin Park
--
Hello!
This is a small set of bugfixes for videobuf2 framework. It looks that
even review done by 3 other developers can miss some minor bugs. I hope
they can be applied to v2.6.38-rcX kernel series once vb2 finally gets
into Linus tree.
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
From: Andrzej Pietrasiewicz
This patch fixes two minor memory leaks in videobuf2-dma-sg module. They
might happen only in case some other operations (like memory allocation)
failed.
Signed-off-by: Andrzej Pietrasiewicz
Signed-off-by: Kyungmin Park
Signed-off-by: Marek Szyprowski
---
drivers/
Em 28-01-2011 07:39, Dmitry Torokhov escreveu:
> On Thu, Jan 27, 2011 at 04:58:57PM -0200, Mauro Carvalho Chehab wrote:
>> Em 27-01-2011 15:21, Dmitry Torokhov escreveu:
>>> On Thu, Jan 27, 2011 at 08:30:00AM -0200, Mauro Carvalho Chehab wrote:
On my tests here, this is working fine, with
Hi Laurent,
Thanks for the patches!
I've got one comment that I should have made long time ago... Pads are
inputs or outputs... or: are they sinks or sources? I recall that it was
agreed on some occasion that sink and source are much less ambiguous and
they should be used instead.
So we'd have M
On Thu, Jan 27, 2011 at 04:58:57PM -0200, Mauro Carvalho Chehab wrote:
> Em 27-01-2011 15:21, Dmitry Torokhov escreveu:
> > On Thu, Jan 27, 2011 at 08:30:00AM -0200, Mauro Carvalho Chehab wrote:
> >>
> >> On my tests here, this is working fine, with Fedora and RHEL 6, on my
> >> usual test devices,
29 matches
Mail list logo
