Ioctls on the subdevs node currently don't dispatch the register access debug
driver callbacks. Add the dispatching with the same security checks are for
non subdev video nodes (i.e. only capable(CAP_SYS_ADMIN may call the register
access ioctls).
Sigend-off-by: Martin Hostettler martin at
-Original Message-
From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
ow...@vger.kernel.org] On Behalf Of Laurent Pinchart
Sent: Monday, September 19, 2011 3:29 AM
To: Martin Hostettler
Cc: Tony Lindgren; linux-o...@vger.kernel.org; linux-
me...@vger.kernel.org;
Hi Laurent,
I am not representing Sylwester :), But with a similar sensor I use,
Aqua means cool tone which is Cb/Cr manipulations.
Regards,
Subash
On 09/19/2011 04:38 AM, Laurent Pinchart wrote:
Hi Sylwester,
Thanks for the patch.
On Friday 16 September 2011 19:05:28 Sylwester Nawrocki
On Sun, Sep 18, 2011 at 11:58:55PM +0200, Laurent Pinchart wrote:
Hi Martin,
On Saturday 17 September 2011 11:34:57 Martin Hostettler wrote:
Adds board support for an MT9M032 based camera to omap3evm.
Sigend-off-by: Martin Hostettler mar...@neutronstar.dyndns.org
---
On Mon, Sep 19, 2011 at 12:53:07AM +0200, Laurent Pinchart wrote:
Hi Martin,
Thanks for the patch.
On Saturday 17 September 2011 11:26:36 Martin Hostettler wrote:
Ioctls on the subdevs node currently don't dispatch the register access
debug driver callbacks. Add the dispatching with the
Hi Martin,
On Monday 19 September 2011 08:10:19 mar...@neutronstar.dyndns.org wrote:
On Sun, Sep 18, 2011 at 11:58:55PM +0200, Laurent Pinchart wrote:
On Saturday 17 September 2011 11:34:57 Martin Hostettler wrote:
Adds board support for an MT9M032 based camera to omap3evm.
Hi Martin,
On Monday 19 September 2011 08:04:56 Martin Hostettler wrote:
Ioctls on the subdevs node currently don't dispatch the register access
debug driver callbacks. Add the dispatching with the same security checks
are for non subdev video nodes (i.e. only capable(CAP_SYS_ADMIN may call
On Sunday, September 18, 2011 20:05:42 Mauro Carvalho Chehab wrote:
Em 03-08-2010 05:18, mats.randga...@tandberg.com escreveu:
From: Mats Randgaard mats.randga...@tandberg.com
The patch TVP7002: Changed register values depends on http://www.mail-
On 09/19/2011 01:02 AM, Laurent Pinchart wrote:
On Saturday 17 September 2011 14:07:30 Sylwester Nawrocki wrote:
On 09/17/2011 12:54 PM, Laurent Pinchart wrote:
On Friday 16 September 2011 19:28:42 Sylwester Nawrocki wrote:
HREF is a signal indicating valid data during single line
Hi Laurent,
On 09/19/2011 01:05 AM, Laurent Pinchart wrote:
On Saturday 17 September 2011 18:06:20 Sylwester Nawrocki wrote:
On 09/17/2011 02:34 PM, Guennadi Liakhovetski wrote:
On Sat, 17 Sep 2011, Sylwester Nawrocki wrote:
On 09/17/2011 12:54 PM, Laurent Pinchart wrote:
On Friday 16
On Sunday 18 September 2011 11:45:16 Randy Dunlap wrote:
We have fallbacks to Andrew and/or GregKH currently, but GregKH is not
consistent or timely with applying drivers/misc/ patches. It deserves
better.
[added him to Cc: list]
I do try to handle patches sent to me for misc/ in
群发软件+109届广交会买家、海关数据、搜索引擎买家,B2B询盘买家共500万,仅10元每天。
保证每天都有买家回复。
保证每天都有买家回复。
1、群发软件： 操作简单，功能强大，模仿人工操作模式，到达率高，日发送5万封以上。
2、500万广交会买家资源： 赠送的500万买家资源库，每月更新 。
3、超级海外买家Email搜索机： 每天能搜索1-2万以上买家真实EMAIL，成单率高。
要的抓紧联系QQ: 1339625218 或者立即回复邮箱: 1339625...@qq.com
要的抓紧联系QQ: 1339625218 或者立即回复邮箱:
this is a v4l2 bridge driver for Blackfin video capture device,
support ppi interface
Signed-off-by: Scott Jiang scott.jiang.li...@gmail.com
---
drivers/media/video/Kconfig |2 +
drivers/media/video/Makefile|2 +
drivers/media/video/blackfin/Kconfig
no mmu system needs get_unmapped_area file operations to do mmap
Signed-off-by: Scott Jiang scott.jiang.li...@gmail.com
---
drivers/media/video/videobuf2-core.c | 31 +++
include/media/videobuf2-core.h |7 +++
2 files changed, 38 insertions(+), 0
this is a v4l2 sensor-level driver for the ST VS6624 camera
Signed-off-by: Scott Jiang scott.jiang.li...@gmail.com
---
drivers/media/video/Kconfig | 10 +
drivers/media/video/Makefile |1 +
drivers/media/video/vs6624.c | 930 +
this driver is a v4l2 subdevice driver to support
Analog Devices ADV7183 SDTV video decoder
Signed-off-by: Scott Jiang scott.jiang.li...@gmail.com
---
drivers/media/video/Kconfig| 10 +
drivers/media/video/Makefile |1 +
drivers/media/video/adv7183.c | 686
The current decoder for the RC6 IR protocol supports mode 0 (16 bit) and
mode 6A. In mode 6A the decoder supports either 32-bit data (for
Microsoft's MCE RC) or 24 bit.
I would like to support a Sky/Sky+ standard RC which transmits RC6-6-20
i.e. 20 bit data. The transmitted frame format is
On Mon, Sep 19, 2011 at 10:47:50AM +0200, Arnd Bergmann wrote:
On Sunday 18 September 2011 11:45:16 Randy Dunlap wrote:
We have fallbacks to Andrew and/or GregKH currently, but GregKH is not
consistent or timely with applying drivers/misc/ patches. It deserves
better.
[added him to
On Thursday 15 September 2011, Grant Likely wrote:
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 21574bd..1836cdf 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,10 +2,9 @@
# Multifunction miscellaneous devices
#
-menuconfig MFD_SUPPORT
-
On Monday 19 September 2011, Greg KH wrote:
That sounds good to me, I'll be glad to collect the patches and push
them to Linus for both of those trees (might as well keep them in the
same git tree, no need to separate them, right?) and I'll rely on you
for review and acking them. Much like I
-Original Message-
From: Laurent Pinchart [mailto:laurent.pinch...@ideasonboard.com]
Sent: Friday, September 16, 2011 6:36 PM
To: Ravi, Deepthy
Cc: linux-media@vger.kernel.org; t...@atomide.com; li...@arm.linux.org.uk;
linux-o...@vger.kernel.org;
Switch to generic media bus signal polarity flags and allow
configuring the FIELD signal polarity.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Signed-off-by: Kyungmin Park s.nawro...@samsung.com
---
drivers/media/video/s5p-fimc/fimc-reg.c | 14 +-
Hello,
The following patch adds support for FIELD signal polarity configuration
through the parallel media bus flags.
The second one just converts s5p-fimc driver to use generic flags.
Changes since v2:
- dropped V4L2_MBUS_HREF* definitions, added comment on usage of
V4L2_MBUS_[HV]SYNC*
FIELD is an Even/Odd field selection signal, as specified in ITU-R BT.601
standard. Add corresponding flag for configuring the FIELD signal polarity.
Also add a comment about usage of V4L2_MBUS_[HV]SYNC* flags for the hardware
that uses [HV]REF signals.
Signed-off-by: Sylwester Nawrocki
FIELD is an Even/Odd field selection signal, as specified in ITU-R BT.601
standard. Add corresponding flag for configuring the FIELD signal polarity.
Also add a comment about usage of V4L2_MBUS_[HV]SYNC* flags for the hardware
that uses [HV]REF signals.
Signed-off-by: Sylwester Nawrocki
Mauro, please pull from my tree for a few noon01pc30 driver updates.
This is conversion to the pad level ops and the subdev user-space API
and other related modifications.
The following changes since commit e27412f5a5966629e3d4213c78a539068ca0ea26:
[media] mmp_camera: add MODULE_ALIAS
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date:Mon Sep 19 19:00:14 CEST 2011
git hash:e27412f5a5966629e3d4213c78a539068ca0ea26
gcc version: i686-linux-gcc
Hi
On Sun, 18 Sep 2011, Laurent Pinchart wrote:
Hi Martin,
On Saturday 17 September 2011 11:34:57 Martin Hostettler wrote:
Adds board support for an MT9M032 based camera to omap3evm.
Sigend-off-by: Martin Hostettler mar...@neutronstar.dyndns.org
---
arch/arm/mach-omap2/Makefile
On Mon, Sep 19, 2011 at 11:37:37AM +0530, Hiremath, Vaibhav wrote:
-Original Message-
From: linux-omap-ow...@vger.kernel.org [mailto:linux-omap-
ow...@vger.kernel.org] On Behalf Of Laurent Pinchart
Sent: Monday, September 19, 2011 3:29 AM
To: Martin Hostettler
Cc: Tony
Hi Laurent
just one question:
On Mon, 19 Sep 2011, Laurent Pinchart wrote:
diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c
new file mode 100644
index 000..8a64193
--- /dev/null
+++ b/drivers/media/video/mt9m032.c
@@ -0,0 +1,814 @@
[snip]
+static
-Original Message-
From: Taneja, Archit
Sent: Friday, September 16, 2011 12:09 PM
To: Valkeinen, Tomi
Cc: Hiremath, Vaibhav; linux-o...@vger.kernel.org; Taneja, Archit; linux-
me...@vger.kernel.org; Molnar, Lajos
Subject: [PATCH v2 1/3] OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha
-Original Message-
From: mar...@neutronstar.dyndns.org [mailto:mar...@neutronstar.dyndns.org]
Sent: Tuesday, September 20, 2011 12:55 AM
To: Hiremath, Vaibhav
Cc: Laurent Pinchart; Tony Lindgren; linux-o...@vger.kernel.org; linux-
me...@vger.kernel.org;
Am 16.09.2011 08:33, schrieb Jean-Francois Moine:
On Thu, 15 Sep 2011 23:46:57 +0200
Frank Schäferfschaefer@googlemail.com wrote:
For webcam devices, the interface class is meaningful only when set to
USB_CLASS_VIDEO (UVC). Otherwise, I saw many different values.
Does that mean that
Hi Guennadi,
On Monday 19 September 2011 21:28:09 Guennadi Liakhovetski wrote:
Hi Laurent
just one question:
On Mon, 19 Sep 2011, Laurent Pinchart wrote:
diff --git a/drivers/media/video/mt9m032.c
b/drivers/media/video/mt9m032.c new file mode 100644
index 000..8a64193
---
On Tue, 20 Sep 2011, Laurent Pinchart wrote:
Hi Guennadi,
On Monday 19 September 2011 21:28:09 Guennadi Liakhovetski wrote:
Hi Laurent
just one question:
On Mon, 19 Sep 2011, Laurent Pinchart wrote:
diff --git a/drivers/media/video/mt9m032.c
b/drivers/media/video/mt9m032.c
Hi Guennadi, all
mt9t112 camera needs 100 milliseconds for initializing
Special thanks to Phil
Signed-off-by: Kuninori Morimoto morimoto.kunin...@renesas.com
Reported-by: Phil Edworthy phil.edwor...@renesas.com
---
drivers/media/video/mt9t112.c |2 +-
1 files
36 matches
Mail list logo
