Hi Malathi,
On Fri, Nov 9, 2018 at 4:39 PM Malathi Gottam wrote:
>
> Handles target type crop by setting the new active rectangle
> to hardware. The new rectangle should be within YUV size.
>
> Signed-off-by: Malathi Gottam
> ---
> drivers/media/platform/qcom/venus/venc.c | 26 +
The i2c address for the Omnivision OV5645 camera sensor is 0x3c. It is
incorrectly mentioned as 0x78 in binding. Hence fix that.
Fixes: 09c716af36e6 [media] media: i2c/ov5645: add the device tree binding
document
Signed-off-by: Manivannan Sadhasivam
---
Documentation/devicetree/bindings/media/i
Handles target type crop by setting the new active rectangle
to hardware. The new rectangle should be within YUV size.
Signed-off-by: Malathi Gottam
---
drivers/media/platform/qcom/venus/venc.c | 26 ++
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/driver
On 2018-11-02 03:16, Tomasz Figa wrote:
On Fri, Nov 2, 2018 at 12:02 AM Stanimir Varbanov
wrote:
Hi Malathi,
On 11/1/18 3:10 PM, mgot...@codeaurora.org wrote:
> On 2018-10-16 15:11, Stanimir Varbanov wrote:
>> Hi Malathi,
>>
>> On 10/09/2018 10:53 AM, Malathi Gottam wrote:
>>> Handles target
On 11/5/18 7:20 AM, Philipp Zabel wrote:
The CSI subdevice shouldn't have to care about IDMAC line start
address alignment. With compose rectangle support in the capture
driver, it doesn't have to anymore.
Signed-off-by: Philipp Zabel
---
drivers/staging/media/imx/imx-media-capture.c | 9 +
Hi Philipp,
On 11/5/18 7:20 AM, Philipp Zabel wrote:
Prepare for mbus format being smaller than the written rectangle
due to burst size.
Signed-off-by: Philipp Zabel
---
drivers/staging/media/imx/imx-media-capture.c | 55 +--
1 file changed, 38 insertions(+), 17 deletions(-
Hi Philipp,
On 11/5/18 7:20 AM, Philipp Zabel wrote:
Allowing to compose captured images into larger memory buffers
will let us lift alignment restrictions on CSI crop width.
Signed-off-by: Philipp Zabel
---
drivers/staging/media/imx/imx-ic-prpencvf.c | 3 +-
drivers/staging/media/imx/im
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Fri Nov 9 05:00:10 CET 2018
media-tree git hash:fbe57dde7126d1b2712ab5ea93fb9d15f89de708
media_build git
Hi Neil,
On 11/8/18 4:50 AM, Neil Armstrong wrote:
> This patchset adds an optional VCC regulator to the bindings and driver to
> make sure power is enabled to the module before starting attaching to
> the device.
>
> Neil Armstrong (2):
> media: cxd2880-spi: Add optional vcc regulator
> medi
Hi, Sakari,
Thanks for your review and comments.
Bingbu has replied to some of your questions, so I will continue with the rest.
> -Original Message-
> From: Bing Bu Cao [mailto:bingbu@linux.intel.com]
> Sent: Tuesday, November 6, 2018 10:17 PM
> To: Sakari Ailus ; Zhi, Yong
>
> Cc:
Hello Sean,
On Wed, 7 Nov 2018 12:05:45 +, Sean Young wrote:
> Hi Peter,
>
> On Tue, Nov 06, 2018 at 10:43:58PM +0100, Peter Seiderer wrote:
> > On Tue, 6 Nov 2018 10:38:56 +, Sean Young wrote:
> >
> > > On Mon, Nov 05, 2018 at 09:30:47PM +0100, Peter Seiderer wrote:
> > > > Copy
Hello Sean,
On Wed, 7 Nov 2018 12:02:05 +, Sean Young wrote:
> It currently does not build on mips and some platforms do not have
> BPF support yet (risc-v, for example).
>
Thanks for the patch, works for the buildroot use case (disabling
bpf support unconditionally), see [1]...
Regards,
On Thu, 8 Nov 2018 at 14:54, Sasha Levin wrote:
>
> On Thu, Nov 08, 2018 at 10:10:10AM +0200, Dafna Hirschfeld wrote:
> >On Thu, Nov 8, 2018 at 2:51 AM Ezequiel Garcia <
> >ezequ...@vanguardiasur.com.ar> wrote:
> >
> >> Hello Dafna,
> >>
> >> Thanks for the patches.
> >>
> >> Just out of curiosity
On Thu, Nov 08, 2018 at 01:46:06PM +0200, Sakari Ailus wrote:
[ upstream commit 92539d3eda2c090b382699bbb896d4b54e9bdece ]
Patch ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscrip
Hi Kieran,
On Wednesday, 7 November 2018 01:31:29 EET Laurent Pinchart wrote:
> On Tuesday, 6 November 2018 23:27:11 EET Kieran Bingham wrote:
> > From: Kieran Bingham
> >
> > The Linux UVC driver has long provided adequate performance capabilities
> > for web-cams and low data rate video device
text[s] is a signed char, so using that as index into the font8x16 array
can result in negative indices. Cast it to u8 to be safe.
Signed-off-by: Hans Verkuil
Reported-by: syzbot+ccf0a61ed12f2a731...@syzkaller.appspotmail.com
---
diff --git a/drivers/media/common/v4l2-tpg/v4l2-tpg-core.c
b/drive
On 10/19/2018 03:26 PM, Eddie James wrote:
On 10/12/2018 07:22 AM, Hans Verkuil wrote:
On 10/05/2018 09:57 PM, Eddie James wrote:
The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs
can capture and compress video data from digital or analog sources.
With
the Aspeed chip
Hi Yong,
On Mon, Oct 29, 2018 at 03:23:02PM -0700, Yong Zhi wrote:
> The pools are used to store previous parameters set by
> user with the parameter queue. Due to pipelining,
> there needs to be multiple sets (up to four)
> of parameters which are queued in a host-to-sp queue.
>
> Signed-off-by:
Hello,
syzbot found the following crash on:
HEAD commit:85758777c2a2 Merge tag 'hwmon-for-v4.20-rc2' of git://git...
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=157af45d40
kernel config: https://syzkaller.appspot.com/x/.config?x=8f559fee2fc3375a
da
On Mon, Sep 10, 2018 at 03:31:17PM +0100, Biju Das wrote:
> Add the SoC specific information for RZ/G2M(r8a774a1) SoC.
> The VIN module of RZ/G2M is similar to R-Car M3-W.
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
Reviewed-by: Simon Horman
Thank you Simon for getting back to me.
Cheers,
Fab
> Subject: Re: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1
> support
>
> On Thu, Nov 08, 2018 at 12:52:30PM +, Fabrizio Castro wrote:
> > Dear All,
> >
> > Who is the best person to take this patch?
>
> I believe this is f
On Mon, Sep 10, 2018 at 03:31:16PM +0100, Biju Das wrote:
> Document RZ/G2M (R8A774A1) SoC bindings.
>
> The RZ/G2M SoC is similar to R-Car M3-W (R8A7796).
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
Reviewed-by: Simon Horman
On Mon, Sep 10, 2018 at 03:31:15PM +0100, Biju Das wrote:
> Add the MIPI CSI-2 driver support for RZ/G2M(r8a774a1) SoC.
> The CSI-2 module of RZ/G2M is similar to R-Car M3-W.
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
Reviewed-by: Simon Horman
Hello Mauro,
Does this patch look ok to you?
Thanks,
Fab
> From: linux-renesas-soc-ow...@vger.kernel.org
> On Behalf Of Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support
>
> Document RZ/G2M (R8A774A1) SoC bindings.
>
> The
Thank you Simon for getting back to me.
Cheers,
Fab
> Subject: Re: [PATCH 2/5] media: rcar-csi2: Enable support for r8a774a1
>
> On Thu, Nov 08, 2018 at 12:51:29PM +, Fabrizio Castro wrote:
> > Dear All,
> >
> > Who is the best person to take this patch?
>
> I believe this is for Mauro.
Re
Hello Mauro,
Does this patch look ok to you?
Thanks,
Fab
> From: linux-renesas-soc-ow...@vger.kernel.org
> On Behalf Of Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 2/5] media: rcar-csi2: Enable support for r8a774a1
>
> Add the MIPI CSI-2 driver support for RZ/G2M(r8a774a1) SoC.
On Thu, Nov 08, 2018 at 12:52:30PM +, Fabrizio Castro wrote:
> Dear All,
>
> Who is the best person to take this patch?
I believe this is for Mauro.
Thank you Simon for getting back to me.
Cheers,
Fab
> Subject: Re: [PATCH 1/5] media: dt-bindings: media: rcar-csi2: Add r8a774a1
> support
>
> On Thu, Nov 08, 2018 at 12:50:22PM +, Fabrizio Castro wrote:
> > Dear All,
> >
> > Who is the best person to take this patch?
>
> I believe this pat
Hello Mauro,
Does this patch look ok to you?
Thanks,
Fab
> From: Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 1/5] media: dt-bindings: media: rcar-csi2: Add r8a774a1
> support
>
> Document RZ/G2M (R8A774A1) SoC bindings.
>
> The RZ/G2M SoC is similar to R-Car M3-W (R8A7796).
>
>
On Thu, Nov 08, 2018 at 12:51:29PM +, Fabrizio Castro wrote:
> Dear All,
>
> Who is the best person to take this patch?
I believe this is for Mauro.
On Mon, Sep 10, 2018 at 03:31:14PM +0100, Biju Das wrote:
> Document RZ/G2M (R8A774A1) SoC bindings.
>
> The RZ/G2M SoC is similar to R-Car M3-W (R8A7796).
>
> Signed-off-by: Biju Das
> Reviewed-by: Fabrizio Castro
Reviewed-by: Simon Horman
On Thu, Nov 08, 2018 at 12:50:22PM +, Fabrizio Castro wrote:
> Dear All,
>
> Who is the best person to take this patch?
I believe this patch is for Mauro.
On 11/08/2018 02:23 PM, Hans Verkuil wrote:
> Update file paths in MAINTAINERS.
>
> Signed-off-by: Hans Verkuil
> Reported-by: Joe Perches
Reviewed-by: Sylwester Nawrocki
Update file paths in MAINTAINERS.
Signed-off-by: Hans Verkuil
Reported-by: Joe Perches
---
diff --git a/MAINTAINERS b/MAINTAINERS
index a8588dedc683..4ee360fb33ad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2062,7 +2062,6 @@ M:Andrzej Hajda
L: linux-arm-ker...@lists.infradead.or
Dear All,
Who is the best person to take this patch?
Cheers,
Fab
> From: Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 4/5] media: rcar-vin: Enable support for r8a774a1
>
> Add the SoC specific information for RZ/G2M(r8a774a1) SoC.
> The VIN module of RZ/G2M is similar to R-Car M3-
Dear All,
Who is the best person to take this patch?
Thanks,
Fab
> From: linux-renesas-soc-ow...@vger.kernel.org
> On Behalf Of Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 3/5] media: dt-bindings: media: rcar_vin: Add r8a774a1 support
>
> Document RZ/G2M (R8A774A1) SoC bindings.
Dear All,
Who is the best person to take this patch?
Thanks,
Fab
> From: linux-renesas-soc-ow...@vger.kernel.org
> On Behalf Of Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 2/5] media: rcar-csi2: Enable support for r8a774a1
>
> Add the MIPI CSI-2 driver support for RZ/G2M(r8a774a
Dear All,
Who is the best person to take this patch?
Thanks,
Fab
> From: Biju Das
> Sent: 10 September 2018 15:31
> Subject: [PATCH 1/5] media: dt-bindings: media: rcar-csi2: Add r8a774a1
> support
>
> Document RZ/G2M (R8A774A1) SoC bindings.
>
> The RZ/G2M SoC is similar to R-Car M3-W (R8A779
This patchset adds an optional VCC regulator to the driver probe function to
make sure power is enabled to the module before starting attaching to
the device.
Signed-off-by: Neil Armstrong
---
drivers/media/spi/cxd2880-spi.c | 16
1 file changed, 16 insertions(+)
diff --git a/d
This patchset adds an optional VCC regulator to the bindings of the Sony
CXD2880 DVB-T2/T tuner + demodulator adapter.
Signed-off-by: Neil Armstrong
---
Documentation/devicetree/bindings/media/spi/sony-cxd2880.txt | 4
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/b
This patchset adds an optional VCC regulator to the bindings and driver to
make sure power is enabled to the module before starting attaching to
the device.
Neil Armstrong (2):
media: cxd2880-spi: Add optional vcc regulator
media: sony-cxd2880: add optional vcc regulator to bindings
.../devi
When dvb_attach fails, probe returns 0, and remove crashes afterwards.
This patch sets the return value to -ENODEV when attach fails.
Fixes: bd24fcddf6b8 ("media: cxd2880-spi: Add support for CXD2880 SPI
interface")
Signed-off-by: Neil Armstrong
---
drivers/media/spi/cxd2880-spi.c | 1 +
1 file
In order to help writing a media summit report, I'm sending the raw notes
that were at Etherpad after the end of the meeting.
Thanks,
Mauro
Media summit 25-10-2018
Edinburgh
https://www.spinics.net/lists/linux-media/msg141095.html
Attendees
Brad Love
Ezequiel Garcia
Gustavo Pado
vb2_core_create_bufs did not check if the memory model for newly added
buffers is the same as for already existing buffers. It should return an
error if they aren't the same.
Signed-off-by: Hans Verkuil
Reported-by: syzbot+e1fb118a2ebb88031...@syzkaller.appspotmail.com
Cc: # for v4.16 and u
Hi Ben,
The two patches fix a use-after-free issue in V4L2 event handling. The
first patch that fixes that issue is already in the other stable trees (as
well as Linus's tree) whereas the second that fixes a bug in the first
one, is in the media tree only as of yet.
https://git.linuxtv.org/media_
[ upstream commit ad608fbcf166fec809e402d548761768f602702c ]
The event subscriptions are added to the subscribed event list while
holding a spinlock, but that lock is subsequently released while still
accessing the subscription object. This makes it possible to unsubscribe
the event --- and freein
[ upstream commit 92539d3eda2c090b382699bbb896d4b54e9bdece ]
Patch ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the fir
[ upstream commit 92539d3eda2c090b382699bbb896d4b54e9bdece ]
Patch ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the fir
[ upstream commit 92539d3eda2c090b382699bbb896d4b54e9bdece ]
Patch ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the fir
On 08.11.2018 14:02, Colin King wrote:
> From: Colin Ian King
>
> The frame.flags & FLAG_B_FRAME is promoted to a long unsigned because
> of the use of the BIT() macro when defining FLAG_B_FRAME and causing a
> build warning. Fix this by using the %lu format specifer.
>
> Cleans up warning:
> dr
Hi Jacopo,
On 08/11/18 11:11, jacopo mondi wrote:
> Hi Luca, Kieran,
> sorry to jump up, but I feel this should be clarified.
>
> On Wed, Nov 07, 2018 at 06:24:18PM +0100, Luca Ceresoli wrote:
>> Hi Kieran,
>>
>> thanks for the clarification. One additional note below.
>>
>> On 07/11/18 16:06
On Thu, Nov 08, 2018 at 11:02:24AM +, Colin King wrote:
> From: Colin Ian King
>
> The frame.flags & FLAG_B_FRAME is promoted to a long unsigned because
> of the use of the BIT() macro when defining FLAG_B_FRAME and causing a
> build warning. Fix this by using the %lu format specifer.
>
> Cl
From: Colin Ian King
The frame.flags & FLAG_B_FRAME is promoted to a long unsigned because
of the use of the BIT() macro when defining FLAG_B_FRAME and causing a
build warning. Fix this by using the %lu format specifer.
Cleans up warning:
drivers/staging/media/tegra-vde/tegra-vde.c:267:5: warnin
Hi,
On 9/29/18 3:00 PM, Srinu Gorle wrote:
> - In video decoder session, update number of bytes used for
> yuv buffers appropriately for EOS buffers.
>
> Signed-off-by: Srinu Gorle
> ---
> drivers/media/platform/qcom/venus/vdec.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
NACK,
Hi Luca, Kieran,
sorry to jump up, but I feel this should be clarified.
On Wed, Nov 07, 2018 at 06:24:18PM +0100, Luca Ceresoli wrote:
> Hi Kieran,
>
> thanks for the clarification. One additional note below.
>
> On 07/11/18 16:06, Kieran Bingham wrote:
> > Hi Luca
> >
> >
> >
> >> kbingham:
The v4l2_dv_timings_cap struct is used to do sanity checks when setting and
enumerating DV timings, ensuring that only valid timings as per the HW
capabilities are allowed.
However, many drivers just filled in 0 for the minimum width, height or
pixelclock frequency. This can cause timings with e.g
On 11/06/2018 08:59 AM, Maxime Jourdan wrote:
> Amlogic SoCs feature a powerful video decoder unit able to
> decode many formats, with a performance of usually up to 4k60.
>
> This is a driver for this IP that is based around the v4l2 m2m framework.
>
> It features decoding for:
> - MPEG 1
> - MP
57 matches
Mail list logo
