Olivier MENUEL wrote:
Sorry,
I was at work today.
I just downloaded the latest version.
It works a lot better than the previous one (the device_nums are correct in the
af9015.c and it seems the frontend is correctly initialized now). Here is the
/var/log/messages :
Looks just correct!
I
Olivier MENUEL wrote:
Here are my tests :
http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/ :
I found why kaffeine was not working : I needed to check all offset checkboxes
when scanning.
Like Thomas, I get these messages in /var/log/messages when scanning or
changing channel :
Thomas RENARD wrote:
I have tested http://linuxtv.org/hg/~anttip/af9015_aver_a850_2.
*It works for me !*
Here is info for Kernel changelog :
*Tested-by: Thomas Renard thren...@gmail.com *
Thank you and Olivier for testing!
I just have this error message during scan but I don't know the
for AverMedia AVerTV Volar Black HD (A850)
Patches are for the Kernel 2.6.30, only small changes.
regards
Antti Palosaari
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http
Mauro Carvalho Chehab wrote:
On Tue, 31 Mar 2009 23:10:45 +0300
Antti Palosaari cr...@iki.fi wrote:
af9015: add support for AverMedia AVerTV Volar Black HD (A850)
There were a small merge conflict on the last one, due to that patch you've
sent me your ack: two #defines included at the same
C Khmer1 wrote:
Hello,
I'm trying to write a linux driver for my A-Data DT1 USB2 DVB-T card.
This card has the GL861+AF9003+MT2060 chips.
I've the specification of AF9002/3/5 family, and there is a linux driver
for AF9005 chip that is an USB back-end plus AF9003 front-end.
There is already a
Hei Mauro,
Please pull from http://linuxtv.org/hg/~anttip/af9015/
for the following:
af9015: support for DigitalNow TinyTwin remote
Patch is for the Kernel 2.6.30.
thanks
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a
heis Claudio and Vortice,
I added Vortice since he was also asking that driver some months ago.
Claudio Chimera wrote:
Hello Antti,
Il giorno mer, 01/04/2009 alle 19.33 +0300, Antti Palosaari ha scritto:
C Khmer1 wrote:
Hello,
I'm trying to write a linux driver for my A-Data DT1 USB2 DVB-T
Chris Brown wrote:
Hello
This device doesnt seem to work
I've tried several different modules referenced in the dvb-t usb page on
linuxtv
Any ideas?
Bus 001 Device 003: ID 07ca:a805 AVerMedia Technologies, Inc.
Bus 001 Device 004: ID 0471:082d Philips
Bus 001 Device 002: ID 0409:005a NEC
Hei Mauro,
Please pull from http://linuxtv.org/hg/~anttip/af9015/
for the following:
af9015: add new dvb_usb_device_properties entry for upcoming USB IDs
af9015: support for AverMedia AVerTV Volar GPS 805 (A805)
af9015: support for Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0
Patch series adds
Armin Schenker kirjoitti:
-.num_device_descs = 11,
+.num_device_descs = 12,
-struct dvb_usb_device_description devices[11];
+struct dvb_usb_device_description devices[12];
I don't comment about this patch but general.
I didn't realized this value is allowed to
On 04/28/2009 07:11 AM, Jesse Sung wrote:
Acked-by: Antti Palosaari cr...@iki.fi
regards
Aantti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org
On 05/26/2009 09:37 PM, Tu-Tu Yu wrote:
Hello:
this is the output of the status... I would like to know how to
calculate the the SNR DB value. Thank you so much!
The frontend they used for DVB-T DUAL express is Zarlink zl10353 DVB-T
status 1e | signal b788 | snr 0f1f1 | ber | unc
Hei Mauro,
Please pull from http://linuxtv.org/hg/~anttip/af9015/
for the following:
af9015: support for Genius TVGo DVB-T03
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More
Terve Jelle,
On 04/24/2009 04:10 PM, Antti Palosaari wrote:
On 04/24/2009 03:25 PM, Jelle de Jong wrote:
I got an USB ID 14aa:0160 Conceptronic USB2.0 DVB-T CTVDIGRCU V2.0 but I
have no idea what chipsets it contains. Could somebody extract the
drivers to be sure? (see my first mail for driver
Terve Jan,
On 06/05/2009 10:52 AM, Jan Nikitenko wrote:
Hi,
I am trying to get AverMedia AVerTV Volar Black HD (A850) usb dvb-t tuner
running on mips32 little endian platform (to stream dvb-t from home
router on LAN).
[..]
DVB: registering new adapter (AverMedia AVerTV Volar Black HD (A850))
On 06/05/2009 07:03 PM, Jelle de Jong wrote:
That is great news, now lets see what is needed to get the code stable
in the mainstream kernel code. So it will work out of the box with the
upcoming kernel releases.
Yes, waiting for info...
Currently I don't have time for developing this and I
Nikitenkojan.nikite...@gmail.com
Acked-by: Antti Palosaari cr...@iki.fi
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/14/2009 01:48 PM, Simon Kenyon wrote:
just bought one of these on the off-chance that it might work
i did not know what chips were on the car when i bought it
but at €17 for a dual tuner dvb-t pci card i reckoned it was worth a try
i have looked at the card and it has:
the e3c EC188/EC100
---
Antti Palosaari wrote:
On 06/10/2009 01:39 AM, Jan Nikitenko wrote:
Solved with [PATCH] af9015: fix stack corruption bug.
This error leads to the zl10353.c and there it was copied to qt1010.c
and af9015.c.
Antti, thanks for pointing out that the same problem was also in
zl10353.c and qt1010
On 10/13/2009 01:12 AM, Devin Heitmueller wrote:
I was debugging an issue on a user's hybrid board, when I realized
that we are switching the em28xx mode whenever we start and stop dvb
streaming. We already have the ts_bus_ctrl callback implemented which
puts the device into digital mode and
On 10/14/2009 10:12 PM, Andrea wrote:
Hi,
I've read that they are going to start trial for HD DVB on Freeview
http://www.bbc.co.uk/blogs/bbcinternet/2009/06/whats_happening_with_freeview.html
http://www.dtg.org.uk/dtg/press_release.php?id=14
They mention September, October and Decembre 2009,
On 10/20/2009 12:19 AM, Patryk Ściborek wrote:
I have HP/Yuan EC372S DVB-T tuner. I'm trying to make it working under
Linux but without success. I've tried using modules from 2.6.31.3 and
compiling from Mercurial repository.
I have same device here - not working. Last time I tried it said
On 10/20/2009 07:39 PM, Patryk Ściborek wrote:
Dnia 2009-10-20, wto o godzinie 02:26 +0300, Antti Palosaari pisze:
Do you have Windows XP drivers? I think I could fix that device if I get
my device working with Windows. And I only have XP...
Hi,
As far as I remember I've just installed
On 10/14/2009 06:52 AM, Devin Heitmueller wrote:
Hello all,
I have setup a tree that removes the mode switching code when
starting/stopping streaming. If you have one of the em28xx dvb
devices mentioned in the previous thread and volunteered to test,
please try out the following tree:
Terve Devin,
On 10/26/2009 05:36 PM, Devin Heitmueller wrote:
Hello Antti,
Sorry, I'm a couple of days behind on email.
On Sun, Oct 25, 2009 at 2:23 PM, Antti Palosaaricr...@iki.fi wrote:
Reddo DVB-C USB Box works fine with this patch. But whats the status of this
patch, when this is going
On 11/19/2009 06:47 PM, Andy Low wrote:
...kernel: Quantek QT1010 successfully identified.
The reason is QT1010 which does not perform very well. Generally it
locks better to weak signals, you can try weaker antenna and signal
attenuator.
Antti
--
http://palosaari.fi/
--
To unsubscribe
On 12/01/2009 04:59 PM, Patrick Boettcher wrote:
I'm waiting for comments.
GIT
I have never used Git but as it is used by main Linux kernel devel tree
I would prefer that too.
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body
On 12/30/2009 10:12 PM, Novák Levente wrote:
cx23885 (PCIe A/V decoder)
xc3028 (hybrid tuner)
af9013 (demod)
all of these individual chips are already supported under Linux, only
the glue is missing between them, I think.
Yes. Also some code changes for af9013 could be needed. There is no
On 05/05/2010 03:36 PM, Bee Hock Goh wrote:
There is already a patch that will make af9105/tda18218 work. However,
it seem that there is no active effort to merge with the mainstream
code.
I have been running that codes with mythtv(recording only) for quite a
while and its working fine.
Terve!
And sorry I have been out of the office for few months... Now I am
back and I think I have again time for this project...
On 03/21/2010 01:14 PM, matthieu castet wrote:
the af9015 eeprom parsing accept 0x38 as 2nd demodulator. But this is
impossible because the
first one is already
Terve!
On 05/02/2010 06:39 PM, Jose Alberto Reguero wrote:
When I have a af9015 DVB-T stick plugged I can not recover from pc suspend. I
must unplug the stick to suspend work. Even if I remove the modules I cannot
recover from suspend.
Any idea why this happen?
Did you asked this 7 months ago
Terve!
On 05/05/2010 05:00 PM, Simon Kenyon wrote:
as an aside: i bought two of these on ebay and if antti wants one so
that he can support it then just drop me an email with a postal address
and i'll send it
Hou, I have been out of this project some time. But now I have time,
maybe whole
Terve Hans,
On 03/14/2012 05:53 PM, Hans van den Bogert wrote:
The anysee driver works correctly from cold boot and reinsertion of the device,
however, after a suspend resume cycle (S3), the device suddenly is initated as
dvb-t as where it was dvb-c before. Yes this is a combo device, so dvb
Terve Marc,
On 05/13/2010 12:14 AM, marc balta wrote:
* when this happens (stuck device) only a reboot or unplugging the stick
helps. Reloading all dvb modules helps nothing. So the problem might be
the firmware?
Problem : device hangs sometimes. It is known problem and hard to fix
because
Terve Honza,
On 04/28/2010 01:59 AM, Honza Stodola wrote:
I'm trying to use AVerTV Volar HD PRO (A835) in Linux, but it seems the
USB receiver is not supported by current kernel (2.6.34-rc5). Sending
some logs and configuration, let me know if you need some more. Any help
is appreciated.
On 05/14/2010 03:50 AM, Jose Alberto Reguero wrote:
El Jueves, 13 de Mayo de 2010, Antti Palosaari escribió:
Terve!
On 05/02/2010 06:39 PM, Jose Alberto Reguero wrote:
When I have a af9015 DVB-T stick plugged I can not recover from pc
suspend. I must unplug the stick to suspend work. Even
Terve
On 05/14/2010 02:17 PM, marc balta wrote:
would be nice because it is happening rather often : Every second or third day.
Is there a way to reinit the device with a script wihtout restarting my server
and without influencing other usb devices. If yes I could reinit the device say
two
Terve,
On 05/20/2010 12:52 PM, Nikola Pajkovsky wrote:
Signed-off-by: Nikola Pajkovskynpajk...@redhat.com
---
drivers/media/common/tuners/Kconfig |7 +
drivers/media/common/tuners/Makefile|1 +
drivers/media/common/tuners/tda18218.c | 432
Terve Dan,
On 05/31/2010 06:09 PM, Dan Carpenter wrote:
Hi I'm going through some smatch stuff and I had a question.
drivers/media/dvb/dvb-usb/anysee.c +482 anysee_probe(30)
warn: variable dereferenced before check 'd'
466 ret = dvb_usb_device_init(intf,anysee_properties,
On 07/06/2010 04:06 PM, Mauro Carvalho Chehab wrote:
This is the summary of the patches that are currently under review at
Linux Media Mailing Listlinux-media@vger.kernel.org.
Each patch is represented by its submission date, the subject (up to 70
chars) and the patchwork link (if submitted via
Evan Nando wrote:
Hi everyone,
I have the qt1010 based AF9005 and find it has VERY unreliable tuning in
Linux. It just fails to lock onto channels, even after it has
successfully scanned them The problem does not exist at all in WindowsXP
using BlazeDVT. What I've discovered is the *XP
hi Jochen,
Jochen Friedrich wrote:
Changes since v1:
- rebase against official linux tree. v1 was based against a local tree and
didn't apply cleanly.
Now it applies cleanly, but didn't compile. Some header file is missing.
Antti
CC [M]
Jochen Friedrich wrote:
This is definitely a BUG. I'll also fix this. Do you want me to post an
update to the tuner or an incremental patch against your repository?
Post new patch. I hope Mauro will pick up your patch and add it to the
master when no more comments are given. Anyhow, I don't
Daniel Dalton wrote:
On Tue, Jan 20, 2009 at 01:30:57PM +0200, Antti Palosaari wrote:
Daniel Dalton wrote:
Could someone please let me know what I have to do to get my msi 5580
usb digital tv tuner working with linux?
What drivers do I need? What software, what should I do to test
Daniel Dalton wrote:
On Wed, Jan 21, 2009 at 12:46:32AM +0200, Antti Palosaari wrote:
Yes, should work out of the box. No need to install any driver, driver
is included in your Kernel.
/dev/dvb/adapter0/ is created. so does this mean the right modules have
been loaded?
Yes, drivers
Jose Alberto Reguero wrote:
The new Avermedia Volar-X is shipped with a new remote(RM-KS). The attached
patch add a new option to the remote parameter of dvb_usb_af9015 for this
remote.
Signed-off-by: Felipe Morales Moreno felipe.morales.mor...@gmail
Signed-off-by: Jose Alberto Reguero
Jose Alberto Reguero wrote:
Signed-off-by: Felipe Morales Moreno felipe.morales.mor...@gmail
This SOB is broken, can I get correct one.
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
Peter Nemeik wrote:
Hallo,
I am looking for Firmware Drivers for the LogiLink VG0002 USB2.0 DVB-T
Stick.
There is a Tuner Chip Maxlinear MXL 5003S and
a Chip from EC168 (EC168.com) XCMK27819X.
I had the Information from the LogiLink Hotline.
MXL5003 is supported but EC168 is not. There is
Hello Mauro,
Please pull from http://linuxtv.org/hg/~anttip/mc44s803/
for the following:
Add Freescale MC44S803 tuner driver
af9015: add MC44S803 support
Jochen, could you also test with your device that nothing has gone broken.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from
Lindsay Mathieson wrote:
I've had a DigitalNow TinyTwin dual usb tuner working on my
mythbox for a week now (latest v4l-dvb trunk).
A odd problem with the tuner has surfaced. Today Tuner 0
stopped getting a lock on any channel. Signal strength is
95%+, Bit Errors are Zero.
However Tuner 1 is
scholl...@arcor.de wrote:
I've downloaded the af9015 firmware version 4.95.0 from here:
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/
Thats ok
but simply downloading and installing into /lib/firmware seems to be not enough
here (Mandriva 2009.0).
scholl...@arcor.de wrote:
Feb 10 20:10:44 localhost kernel: af9013: firmware version:4.65.0
Still old firmware. What md5sum says?
[r...@localhost ~]# md5sum /lib/firmware/dvb-usb-af9015.fw
dccbc92c9168cc629a88b34ee67ede7b /lib/firmware/dvb-usb-af9015.fw
Antti
--
http://palosaari.fi/
--
To
Tanguy Pruvot wrote:
#define CMD_EC168_RAM 0x00 //RW- Read/Write RAM (Firmware go to addr
0-0x1EFF)
#define CMD_EC168_GETSTATUS 0x01 //R-- ex:
dfu_ctrl_get(device,0x01,0x,0x01A0,buffer,0x1A);
#define CMD_EC168_STREAM0x03 //R-X ex: dfu_ctrl(device,0x03,0/0x20,0xFF00);
Tanguy,
are you still hacking with device? Or is there anyone else who is?
I have done some work but not very much. Basically it now loads firmware
and and have some basic demod and tuner stuff. I have now one one
problem that I have no idea why. After firmware download device
reconnects
Antti Palosaari wrote:
I have done some work but not very much. Basically it now loads firmware
and and have some basic demod and tuner stuff. I have now one one
problem that I have no idea why. After firmware download device
reconnects (upon request as seen from sniff) with vendor and product
Thomas RENARD wrote:
I bought this USB card : AVerTV Volar Black HD (A850) -
http://www.avermedia.com/avertv/Product/ProductDetail.aspx?Id=460tab=APDriver.
I don't find anything relevant about using this card on linux.
Can I use this card on Linux ? How ?
Here is some information :
Looks
Hello,
This patch breaks devices using tuner behind zl10353 i2c-gate.
au6610:
Sigmatek DVB-110 DVB-T USB2.0
gl861:
MSI Mega Sky 55801 DVB-T USB2.0
A-LINK DTU DVB-T USB2.0
Probably some other too.
I think it is better to disable i2c-gate setting callback to NULL after
demod attach like dtv5100
scholl...@arcor.de wrote:
af9013: firmware version:4.65.0
usbcore: registered new interface driver dvb_usb_af9015
This is the same when installing no firmware, or installing the file from
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/
into
Kaan Aksit wrote:
From the address of http://linuxtv.org/hg/v4l-dvb , I have installed my AF9015
USB TV STICK. It works perfect. Thank you very much for the drivers. But I have
a small problem with the remote. When I click on volume up or volume down, it
does it is job. But for example when I
Terve,
DVB-T updates for Finland.
regards
Antti
--
http://palosaari.fi/
diff -r 89ace84489b0 util/scan/dvb-t/fi-Rantalaki
--- a/util/scan/dvb-t/fi-Rantalaki Sun Mar 08 22:28:51 2009 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +
@@ -1,4 +0,0 @@
-# automatically generated from
Dmitri Belimov wrote:
Could one of you please do such patchset?
I haven't a lot expirience with kernel programming. If Antti can it is good.
I'll check it
on our board.
OK, I will do. For the first phase and as a bug fix I will do that
(disable i2c-gate) like dtv5100 driver does. After
Antti Palosaari wrote:
Dmitri Belimov wrote:
Could one of you please do such patchset?
I haven't a lot expirience with kernel programming. If Antti can it is
good. I'll check it
on our board.
OK, I will do. For the first phase and as a bug fix I will do that
(disable i2c-gate) like
moi,
t.Hgch wrote:
I also followed this post to get streams from the EC168:
https://www.dealextreme.com/forums/Default.dx/sku.8325~threadid.278942
However my card is a MinTv usb 2.0 dvb-t DUTV002, which seems to be
using a MT2060 tuner. Some channels where partially received. Let me
Partially
t.Hgch wrote:
Partially received? If there is really MT2060 tuner then channels should
not be received at all.
I checked again and i am getting a couple of dtv channels and some more
radio channels, and they display/sound pretty well.
Then the tuner must be MXL5003S because it is only
Tanguy PRUVOT wrote:
There is a Linux EC168 (with MxL) driver available Where can i find
it ?
http://linuxtv.org/hg/~anttip/ec168/
Antti
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at
hei Stuart,
Stuart wrote:
First of all, thanks to those involved in getting the TinyTwin working!
I haven't found any support for the remote control yet so I would like to offer
what I've managed to do so far (in case I've done something wrong as this is
the first time I've tried to submit a
Hello Mauro,
Please pull http://linuxtv.org/hg/~anttip/ce6230/
for the following:
zl10353: add support for Intel CE6230 and Intel CE6231
Add driver for Intel CE6230 DVB-T USB2.0
Patch series adds new DVB USB driver targeted for 2.6.30.
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe
Seems to be clear bug! Thanks.
Acked-by: Antti Palosaari cr...@iki.fi
On 01/03/2012 07:47 PM, Gianluca Gennari wrote:
This patch fixes an obvious typo in the get_frontend() function
of the af9013 driver, recently rewritten by Antti Palosaari.
Signed-off-by: Gianluca Gennarigennar
Clear bug, I will test it later when applied to master if not already.
Thanks!
Acked-by: Antti Palosaari cr...@iki.fi
On 01/05/2012 08:23 AM, Dan Carpenter wrote:
This is just a cleanup, it doesn't change how the code works. These
are compound conditions and not bitwise operations so
About AF9015
Acked-by: Antti Palosaari cr...@iki.fi
I have already done that for my newer drivers, but not for AF9015 as it
was so old and many device IDs...
Antti
On 01/07/2012 10:11 AM, Jonathan Nieder wrote:
The af9005_properties and af9015_properties tables make use of USB ids
from
DVB-T did not work at all - only 6 MHz was working but it is not
commonly used.
Fix it.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/common/tuners/mxl5007t.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/media/common/tuners/mxl5007t.c
b
Behaviour of new FE is strange for my eyes. Could you look and explain
if it is intentional?
[crope@localhost dvb]$ ./dvb-fe-tool
Device Sony CXD2820R (DVB-T/T2) (/dev/dvb/adapter0/frontend0) capabilities:
CAN_2G_MODULATION CAN_FEC_1_2 CAN_FEC_2_3 CAN_FEC_3_4 CAN_FEC_5_6
CAN_FEC_7_8
On 01/05/2012 05:37 PM, Mauro Carvalho Chehab wrote:
With all these series applied, it is now possible to use frontend 0
for all delivery systems. As the current tools don't support changing
the delivery system, the dvb-fe-tool (on my experimental tree[1]) can now
be used to change between them:
long
unsigned int *’ but argument is of type ‘u8 *’
Antti
The following changes since commit 2f78604a433a12571ec3e54054fbfacc7525b307:
[media] Added model Sveon STV40 (2012-01-07 12:02:20 -0200)
are available in the git repository at:
git://linuxtv.org/anttip/media_tree.git hdic_v2
Antti
On 01/10/2012 03:28 PM, Jim Darby wrote:
I've been using a PCTV Nanostick T2 USB DVB-T2 receiver (one of the few
that supports DVB-T2) for over six months with a 3.0 kernel with no
problems.
The key drivers in use are em28xx, cxd2820r and tda18271.
Seeing the 3.2 kernel I thought I'd upgrade
/media_tree.git hdic_v3
Antti Palosaari (1):
revert patch: HDIC HD29L2 DMB-TH USB2.0 reference design driver
drivers/media/dvb/dvb-usb/Kconfig |7 -
drivers/media/dvb/dvb-usb/Makefile |3 -
drivers/media/dvb/dvb-usb/hdic.c | 365
drivers/media/dvb
Chehab mche...@redhat.com
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/dvb-core/dvb_frontend.c | 14 +++---
drivers/media/dvb/dvb-core/dvb_frontend.h |2 ++
drivers/media/dvb/frontends/atbm8830.c|2 +-
drivers/media/dvb/frontends/lgs8gl5.c |2
On 01/14/2012 05:31 PM, Antti Palosaari wrote:
+typedef enum fe_interleaving {
+ INTERLEAVING_NONE,
+ INTERLEAVING_240,
+ INTERLEAVING_720,
+} fe_interleaving_t;
Checkpatch didn't like that, but I left it as all the others are
similar. I am happy to fix it too if there is idea what it should
cxd2820r implements only one frontend currently which
handles all the standards.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/dvb-usb/anysee.c | 20 +++-
1 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/anysee.c
b
On 01/11/2012 12:00 AM, Mauro Carvalho Chehab wrote:
On 10-01-2012 19:36, Antti Palosaari wrote:
Behaviour of new FE is strange for my eyes. Could you look and explain if it is
intentional?
I still see that it changes delivery system automatically to the DVB-T.
That is the latest commit
Fix another bug introduced by recent multi-frontend to single-frontend
change.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/frontends/cxd2820r_core.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c
b
On 01/15/2012 08:37 PM, Antti Palosaari wrote:
On 01/11/2012 12:00 AM, Mauro Carvalho Chehab wrote:
On 10-01-2012 19:36, Antti Palosaari wrote:
Behaviour of new FE is strange for my eyes. Could you look and
explain if it is intentional?
I still see that it changes delivery system
cxd2820r implements only one frontend currently which
handles all the standards.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/dvb-usb/anysee.c | 20 +++-
1 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb/anysee.c
b
Fix another bug introduced by recent multi-frontend to single-frontend change.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/frontends/cxd2820r_core.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c
b
Fix yet another bug introduced be recent cxd2820r multi-frontend to
single-frontend change.
Finally, we have at least almost working picture for DVB-C too.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/frontends/cxd2820r_core.c |1 +
1 files changed, 1 insertions(+), 0
On 01/15/2012 11:08 PM, Mauro Carvalho Chehab wrote:
Em 15-01-2012 18:03, Antti Palosaari escreveu:
On 01/15/2012 08:37 PM, Antti Palosaari wrote:
On 01/11/2012 12:00 AM, Mauro Carvalho Chehab wrote:
On 10-01-2012 19:36, Antti Palosaari wrote:
That seems to be due to cxd2820r bug
On 01/15/2012 11:08 PM, Mauro Carvalho Chehab wrote:
There was a bug at the error code handling on dvb-fe-tool: basically, if it
can't open
a device, it were using a NULL pointer. It was likely fixed by this commit:
should add logic for dvb-core to drop out illegal calls like that.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/frontends/cxd2820r_core.c |5 +
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c
b/drivers/media
Fix bug introduced by multi-frontend to single-frontend change.
* Add missing DVB-C caps
* Change frontend name as single frontend does all the standards
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/frontends/cxd2820r_core.c |4 +++-
1 files changed, 3 insertions(+), 1
I tested almost all DVB-T/T2/C devices I have and all seems to be
working, excluding Anysee models when using legacy zap.
Anysee anysee_streaming_ctrl() will fail because
mutex_lock_interruptible() returns -EINTR in anysee_ctrl_msg() function
when zap is killed using ctrl+c. This will led
On 01/19/2012 01:33 PM, Mauro Carvalho Chehab wrote:
Em 18-01-2012 20:05, Antti Palosaari escreveu:
I tested almost all DVB-T/T2/C devices I have and all seems to be working,
excluding Anysee models when using legacy zap.
Anysee anysee_streaming_ctrl() will fail because
On 01/19/2012 03:31 PM, Mauro Carvalho Chehab wrote:
Em 19-01-2012 09:57, Antti Palosaari escreveu:
On 01/19/2012 01:33 PM, Mauro Carvalho Chehab wrote:
Em 18-01-2012 20:05, Antti Palosaari escreveu:
I tested almost all DVB-T/T2/C devices I have and all seems to be working,
excluding Anysee
On 01/19/2012 06:08 PM, Mauro Carvalho Chehab wrote:
Em 19-01-2012 13:53, Antti Palosaari escreveu:
On 01/19/2012 03:31 PM, Mauro Carvalho Chehab wrote:
Em 19-01-2012 09:57, Antti Palosaari escreveu:
On 01/19/2012 01:33 PM, Mauro Carvalho Chehab wrote:
Em 18-01-2012 20:05, Antti Palosaari
Fix bug introduced by multi-frontend to single-frontend change.
This parameter is no longer used after multi-frontend to single-frontend change.
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/dvb-usb/anysee.c |3 +--
drivers/media/dvb/frontends/cxd2820r.h
No more error that error seen when device is plugged:
dvb_ca adapter 0: Invalid PC card inserted :(
Signed-off-by: Antti Palosaari cr...@iki.fi
---
drivers/media/dvb/dvb-usb/anysee.c |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/media/dvb/dvb-usb
On 01/20/2012 11:18 PM, Gordon Hecker wrote:
This patch fixes the following error messages with a
Terratec Cinergy T Stick Dual RC DVB-T device.
af9013: i2c wr failed=-1 reg=d607 len=1
af9015: command failed:2
af9013: i2c rd failed=-1 reg=d607 len=1
af9015: command failed:1
It implements
Control message load increased heavily after CI/CAM support due
to dvb_ca_en50221. It looks like CI/CAM drops to non-working
state easily after error is returned to its callbacks. Due to
that, add some logic to avoid errors repeating failed messages.
Signed-off-by: Antti Palosaari cr...@iki.fi
On 01/20/2012 02:38 PM, Mauro Carvalho Chehab wrote:
Basically I would like to ask slow down API changes since it causes all
the problems and extra work.
Rather than always doing API changes of our perspective I would like to
ask if it is possible to ask applications developers to help?
Hello
I picked up again my old RTL2831U tree and upgraded to current level. It
supports only RTL2831U, not RTL2832U or any other. I think I will
pull-request it to the master in hope it get development effort. I have
no time for it. It is working, but does not do anything extra - just
show
201 - 300 of 3449 matches
Mail list logo