...@ideasonboard.com
Cc: linux-media@vger.kernel.org
Cc: Sascha Hauer ker...@pengutronix.de
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
---
include/uapi/linux/videodev2.h |1 +
1 file changed, 1 insertion(+)
diff --git
Hauer ker...@pengutronix.de
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
---
.../bindings/staging/imx-drm/fsl-imx-drm.txt |2 +-
drivers/staging/imx-drm/ipu-v3/ipu-dc.c|9 +
drivers/staging
...@ideasonboard.com
Cc: linux-media@vger.kernel.org
Cc: Sascha Hauer ker...@pengutronix.de
Cc: Shawn Guo shawn@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v2-v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy of the short
description.
- Rebased
...@ideasonboard.com
Cc: linux-media@vger.kernel.org
Cc: Sascha Hauer ker...@pengutronix.de
Cc: Shawn Guo shawn@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v2-v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just a copy of the short
description.
- Rebased
@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v3-v5:
- Use the correct RGB order.
ChangeLog v2-v3:
- Added some interested people in the Cc list.
- Removed the commit message long desciption that was just
...@ideasonboard.com
Cc: linux-media@vger.kernel.org
Cc: Sascha Hauer ker...@pengutronix.de
Cc: Shawn Guo shawn@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
@linaro.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: Eric Bénard e...@eukrea.com
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v5:
- New patch.
---
arch/arm/boot/dts/imx51-apf51dev.dts|2 +-
arch/arm/boot/dts/imx53-m53evk.dts |2 +-
drivers/staging/imx-drm/ipu-v3/ipu-dc.c
...@boundarydevices.com
Cc: linux-media@vger.kernel.org
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
ChangeLog v5-v6:
- Remove people not concerned by this patch from the Cc list.
ChangeLog v3-v4
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Cc: Eric Bénard e...@eukrea.com
CC: Troy Kisky troy.ki...@boundarydevices.com
Cc: linux-media@vger.kernel.org
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Cc: Eric Bénard e...@eukrea.com
Cc: Mauro Carvalho Chehab m.che...@samsung.com
Cc: linux-media@vger.kernel.org
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
---
ChangeLog v8
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
ChangeLog v7-v8:
- Shrinked even
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7-v8:
- Shrinked even more the Cc list.
ChangeLog v6-v7:
- Shrinked even more the Cc list.
ChangeLog v5-v6:
- Remove people not concerned
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v9-v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v8-v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7-v8
If de-active and/or pixelclk-active properties were set in the
display-timings DT node, they were not used.
Instead the data-enable and the pixel data clock polarity
were hardcoded.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch from what's left of:
staging
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Philipp
-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch that was splitted out of:
staging imx-drm: Use de-active and pixelclk-active
display-timings.
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/boot/dts
imx_drm_of_get_extra_timing_flags will be used to
retrive the native-mode and de-active display-timings
node properties in the device tree.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch that was splitted out of
staging: imx-drm: Use de-active and pixelclk
The hardware behaviour was kept.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch that was splitted out of
staging: imx-drm: Use de-active and pixelclk-active
display-timings.
- The IMXDRM_MODE_FLAG_ are now using the BIT macros.
- The SET_CLK_POL and SET_DE_POL
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Philipp
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v8-v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7-v8
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v9-v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch which was splitted out from:
staging: imx-drm: Use de-active and pixelclk-active display-timings..
- Fixes many issues in staging: imx-drm: Use de-active and pixelclk-active
display-timings.:
- More clear meaning
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch that is now needed by the
staging: imx-drm: Use de-active and pixelclk
The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli de...@eukrea.com
---
- New patch, splitting it would be overkill.
---
arch/arm/configs/imx_v6_v7_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6-v7:
- Shrinked even more the Cc list
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Philipp
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v8-v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- Rebased.
ChangeLog v7-v8
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v9-v10:
- Rebased.
- Added Philipp Zabel's Ack.
- Included
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog 11-v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9-v10:
- New patch which was splitted out from:
staging: imx-drm: Use de-active and pixelclk-active
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v11-v12:
- Rebased: This patch now applies against drm_modes.h
- Rebased
According to the datasheet, setting the di0_polarity_disp_clk
field in the GENERAL di register sets the output clock polarity
to active high.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch that is now needed by the
staging: imx-drm: Use de-active and pixelclk
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v11-v12:
- Rebased: It now uses the following new flags defines names:
CLK_POL, ENABLE_POL
- The inversions in ipuv3-crtc.c are now fixed.
- ipuv3-crtc.c was still
-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v10:
- New patch that was splitted out of:
staging imx-drm: Use de-active and pixelclk-active
display-timings.
---
arch/arm/boot/dts/imx51-babbage.dts |2 ++
arch/arm/boot/dts/imx53-m53evk.dts|2 ++
arch/arm/boot/dts
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v11-v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10-v11:
- New patch.
---
.../bindings/panel/eukrea,mbimxsd51-cmo-qvga.txt |7 ++
.../bindings/panel/eukrea,mbimxsd51-dvi-svga.txt |7
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v10-v11:
- Now uses the drm-panel instead of the display-timings.
This is to get regulator support, which is lacking in
the imx-drm driver when using the display-timings.
ChangeLog v9
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v9-v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6-v7:
- Shrinked even more the Cc list
The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v10-v11:
- New patch, splitting it would be overkill.
---
arch/arm/configs/imx_v6_v7_defconfig |2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs
On 04/08/2014 08:36 AM, Andrzej Hajda wrote:
Hi Denis,
Hi,
+#define DRM_MODE_FLAG_POL_PIXDATA_NEGEDGE BIT(1)
+#define DRM_MODE_FLAG_POL_PIXDATA_POSEDGE BIT(2)
+#define DRM_MODE_FLAG_POL_PIXDATA_PRESERVE BIT(3)
What is the purpose of DRM_MODE_FLAG_POL_PIXDATA_PRESERVE?
If
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Philipp
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v9-v13:
- Rebased
ChangeLog v8-v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly
-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v10-v11:
- imx53-tx53-x03x.dts change was removed because it
already had the correct setting.
ChangeLog v9-v10:
- New patch that was splitted out of:
staging imx-drm: Use de-active and pixelclk-active
display-timings.
---
arch/arm/boot/dts
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v10-v13:
- Rebased
ChangeLog v9-v10:
- Rebased.
- Added
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog 12-v13:
- No changes
ChangeLog 11-v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9-v10:
- New patch which was splitted out from:
staging: imx-drm: Use
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v12-v13:
- Added a note explaining why the size is zero in
the eukrea_mbimxsd51_dvi(s)vga structs.
ChangeLog v11-v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10-v11:
- New patch
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v12-v13:
- This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore.
- code cleanup to improve readability:
- ENABLE_POL_PRESERVE is now gone
- Less
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v11-v13:
- No changes
ChangeLog v9-v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot.
ChangeLog v6-v7
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v10-v13:
- Rebased
- Removed enable-active-high in reg_lcd_3v3: its GPIO
already has the GPIO_ACTIVE_HIGH flag.
Without this removal, the display was off at boot
and powering it off
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v12-v13:
- Added Docbook documentation for pol_flags the struct field
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v13-v14:
- Rebased
ChangeLog v9-v13:
- Rebased
ChangeLog v8-v9:
- Rebased.
- Added Philipp Zabel's ack.
- Shortened the patch title.
ChangeLog v8-v9:
- Removed the Cc. They are now set
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Mauro Carvalho Chehab m.che...@samsung.com
Acked-by: Laurent Pinchart laurent.pinch...@ideasonboard.com
Acked-by: Philipp
The current BGR666 is not consistent with the other color mapings like BGR24.
BGR666 should be in the same byte order than BGR24.
Signed-off-by: Denis Carikli de...@eukrea.com
Acked-by: Philipp Zabel p.za...@pengutronix.de
---
ChangeLog v13-v14:
- Rebased
ChangeLog v10-v13:
- Rebased
ChangeLog v9
We need a way to pass signal polarity informations
between DRM panels, and the display drivers.
To do that, a pol_flags field was added to drm_display_mode.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- Fixed DRM_MODE_FLAG_POL_DE_HIGH's description.
ChangeLog v12-v13
The previous hardware behaviour was kept if the
flags are not set.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- Rebased
ChangeLog v12-v13:
- This patch doesn't need the DRM_MODE_FLAG_POL_*_PRESERVE flags anymore.
- code cleanup to improve readability
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- Rebased
ChangeLog 12-v13:
- No changes
ChangeLog 11-v12:
- Improved the define names to match the hardware:
ENABLE_POL is not a clock signal but instead an enable signal.
ChangeLog v9-v10:
- New patch which was splitted out
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- None
ChangeLog v11-v13:
- No changes
ChangeLog v9-v11:
- Now uses the drm-panel instead of the display-timings.
ChangeLog v8-v9:
- Removed the Cc. They are now set in git-send-email directly.
- The backlight is now on at boot
-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- None
ChangeLog v10-v11:
- imx53-tx53-x03x.dts change was removed because it
already had the correct setting.
ChangeLog v9-v10:
- New patch that was splitted out of:
staging imx-drm: Use de-active and pixelclk-active
display-timings
The CMO-QVGA, DVI-SVGA and DVI-VGA are added.
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- None
ChangeLog v10-v13:
- Rebased
- Removed enable-active-high in reg_lcd_3v3: its GPIO
already has the GPIO_ACTIVE_HIGH flag.
Without this removal, the display was off
Signed-off-by: Denis Carikli de...@eukrea.com
---
ChangeLog v13-v14:
- None
ChangeLog v12-v13:
- Added a note explaining why the size is zero in
the eukrea_mbimxsd51_dvi(s)vga structs.
ChangeLog v11-v12:
- Rebased: It now uses the new DRM_MODE_FLAG_POL_DE flags defines names
ChangeLog v10-v11
On 06/16/2014 12:11 PM, Denis Carikli wrote: + reg_lcd_3v3: lcd-en {
+ compatible = regulator-fixed;
+ pinctrl-names = default;
+ pinctrl-0 = pinctrl_reg_lcd_3v3;
+ regulator-name = lcd-3v3;
+ regulator-min-microvolt = 330
On 06/16/2014 02:29 PM, Denis Carikli wrote:
[...]
Which result at the lcd regulator being physically powered on at boot.
I didn't see that because powering it on at boot is what I want.
I fixed that in imx-drm's parallel-display with another patch I just
sent separately.
Denis
On 06/24/2014 05:13 PM, Russell King - ARM Linux wrote:
[...]
If you'd like to send me better commit messages for
these patches, I'll add them to what I already have:
imx-drm: use defines for clock polarity settings
The comment of the clk_pol field of the ipu_di_signal_cfg struct was
On 06/25/2014 12:04 AM, Thierry Reding wrote:
because on this very simple display board, we only have DVI LVDS signals
without the I2C to detect the display.
That's unfortunate. In that case perhaps a better approach would be to
add a video timings node to the device that provides the DVI
On 06/24/2014 05:06 PM, Russell King - ARM Linux wrote:
It would be better if you separate the
binding documentation updates from the other functional changes too.
Fixed.
Denis.
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to
On 06/25/2014 06:48 AM, Sascha Hauer wrote:
+#define ENABLE_POL_LOW 0
+#define ENABLE_POL_HIGH1
Adding defines without a proper namespace (IPU_) outside a driver
private header file is not nice. Anyway, instead of adding the
defines ...
Fixed in imx-drm: use defines for
68 matches
Mail list logo
