On Wed, Aug 28, 2013 at 03:43:04AM +0100, Prabhakar Lad wrote:
Hi Mark,
On Tue, Aug 27, 2013 at 8:54 PM, Mark Rutland mark.rutl...@arm.com wrote:
[fixing up devicetree list address]
Thanks!
On Mon, Aug 26, 2013 at 03:41:45AM +0100, Prabhakar Lad wrote:
Hi Sylwester,
On Fri, Aug
On Mon, Sep 02, 2013 at 05:21:58PM +0100, Sylwester Nawrocki wrote:
Hi Mark,
Hi Sylwester,
On 08/27/2013 11:14 AM, Mark Rutland wrote:
+endpoint node
+-
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. This property can
On Wed, Sep 04, 2013 at 08:13:38AM +0100, Prabhakar Lad wrote:
Hi Mark,
Hi Prabhakar,
On Mon, Sep 2, 2013 at 9:47 PM, Mark Rutland mark.rutl...@arm.com wrote:
On Wed, Aug 28, 2013 at 03:43:04AM +0100, Prabhakar Lad wrote:
Hi Mark,
On Tue, Aug 27, 2013 at 8:54 PM, Mark Rutland
On Thu, Aug 29, 2013 at 01:06:52PM +0100, Srinivas KANDAGATLA wrote:
From: Srinivas Kandagatla srinivas.kandaga...@st.com
This patch adds support to ST RC driver, which is basically a IR/UHF
receiver and transmitter. This IP (IRB) is common across all the ST
parts for settop box platforms.
On Wed, Sep 18, 2013 at 11:11:29AM +0100, Srinivas KANDAGATLA wrote:
Thanks Mark,
On 16/09/13 15:10, Mark Rutland wrote:
+
+Required properties:
+ - compatible: should be st,comms-irb.
This should probably say should contain rather than should be. There
may be future vairants
On Fri, Sep 06, 2013 at 11:31:06AM +0100, Andrzej Hajda wrote:
Driver for Samsung S5K5BAF UXGA 1/5 2M CMOS Image Sensor
with embedded SoC ISP.
The driver exposes the sensor as two V4L2 subdevices:
- S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format,
no controls.
- S5K5BAF-ISP -
On Fri, Sep 27, 2013 at 10:33:11AM +0100, Srinivas KANDAGATLA wrote:
From: Srinivas Kandagatla srinivas.kandaga...@st.com
This patch attempts to collate generic bindings which can be used by
the remote control hardwares. Currently the list is not long as there
are only 2 drivers which are
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
new file mode 100644
index 000..7704a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
@@ -0,0 +1,58 @@
On Fri, Sep 27, 2013 at 02:47:19PM +0100, Mauro Carvalho Chehab wrote:
Em Fri, 27 Sep 2013 12:34:58 +0100
Mark Rutland mark.rutl...@arm.com escreveu:
On Fri, Sep 27, 2013 at 10:33:11AM +0100, Srinivas KANDAGATLA wrote:
From: Srinivas Kandagatla srinivas.kandaga...@st.com
This patch
On Wed, Oct 09, 2013 at 01:17:30PM +0100, srinivas kandagatla wrote:
.../devicetree/bindings/media/remote-control.txt | 31
1 files changed, 31 insertions(+), 0 deletions(-)
create mode 100644
Documentation/devicetree/bindings/media/remote-control.txt
link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.
These don't seem to be in the example and probably should be.
Otherwise, this looks fine. With those points fixed up:
Acked-by: Mark Rutland mark.rutl...@arm.com
Thanks
: should contain the sensor's EXTCLK clock specifier, from
+ the common clock bindings
I would reword this to reference clock-names so as to make the ordering
relationship explicit.
With that, as everything else looks sane:
Acked-by: Mark Rutland mark.rutl...@arm.com
Thanks
Mark
On Fri, Sep 27, 2013 at 11:59:06AM +0100, Arun Kumar K wrote:
From: Shaik Ameer Basha shaik.am...@samsung.com
This patch adds support for media device for EXYNOS5 SoCs.
The current media device supports the following ips to connect
through the media controller framework.
[...]
diff --git
On Fri, Sep 27, 2013 at 11:59:07AM +0100, Arun Kumar K wrote:
The patch adds the DT binding documentation for Samsung
Exynos5 SoC series imaging subsystem (FIMC-IS).
Signed-off-by: Arun Kumar K arun...@samsung.com
Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com
---
On Sun, Nov 03, 2013 at 10:03:15PM +, Sebastian Reichel wrote:
Hi,
This is an early RFC for omap3isp DT support. For now i just created a
potential DT
binding documentation based on the existing platform data:
Binding for the OMAP3 Camera subsystem with the image signal processor
:
Acked-by: Mark Rutland mark.rutl...@arm.com
I think we still need to move the DT binding into a separate patch.
If you're going to post the patch again, then please do split the
binding into a separate patch.
[...]
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
b
On Wed, Aug 14, 2013 at 06:27:01PM +0100, Srinivas KANDAGATLA wrote:
From: Srinivas Kandagatla srinivas.kandaga...@st.com
This patch adds support to ST RC driver, which is basically a IR/UHF
receiver and transmitter. This IP is common across all the ST parts for
settop box platforms. IRB is
On Thu, Aug 15, 2013 at 01:57:13PM +0100, Srinivas KANDAGATLA wrote:
Thanks Mark for your comments.
On 15/08/13 09:49, Mark Rutland wrote:
On Wed, Aug 14, 2013 at 06:27:01PM +0100, Srinivas KANDAGATLA wrote:
From: Srinivas Kandagatla srinivas.kandaga...@st.com
This patch adds support
On Thu, Aug 15, 2013 at 03:06:14PM +0100, Srinivas KANDAGATLA wrote:
On 15/08/13 14:29, Mark Rutland wrote:
On Thu, Aug 15, 2013 at 01:57:13PM +0100, Srinivas KANDAGATLA wrote:
Thanks Mark for your comments.
On 15/08/13 09:49, Mark Rutland wrote:
On Wed, Aug 14, 2013 at 06:27:01PM +0100
On Mon, Aug 19, 2013 at 02:18:27PM +0100, Andrzej Hajda wrote:
Driver for Samsung S5K5BAF UXGA 1/5 2M CMOS Image Sensor
with embedded SoC ISP.
The driver exposes the sensor as two V4L2 subdevices:
- S5K5BAF-CIS - pure CMOS Image Sensor, fixed 1600x1200 format,
no controls.
- S5K5BAF-ISP -
Hi,
[trimming down to relevant context]
+endpoint node
+-
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. This property can be only used to specify number
+ of data lanes, i.e. the array's content is unused, only its length
On Mon, Aug 26, 2013 at 03:41:45AM +0100, Prabhakar Lad wrote:
Hi Sylwester,
On Fri, Aug 23, 2013 at 11:33 PM, Sylwester Nawrocki
s.nawro...@samsung.com wrote:
Cc: DT binding maintainers
Cheers!
On 07/20/2013 08:21 AM, Lad, Prabhakar wrote:
From: Lad, Prabhakar
[fixing up devicetree list address]
On Mon, Aug 26, 2013 at 03:41:45AM +0100, Prabhakar Lad wrote:
Hi Sylwester,
On Fri, Aug 23, 2013 at 11:33 PM, Sylwester Nawrocki
s.nawro...@samsung.com wrote:
Cc: DT binding maintainers
Cheers!
On 07/20/2013 08:21 AM, Lad, Prabhakar wrote:
From:
://www.spinics.net/lists/devicetree/msg11550.html
Please check this and give an ack if it is fine to be merged.
Apologies for the delay.
As far as I can tell this looks ok:
Acked-by: Mark Rutland mark.rutl...@arm.com
Regards
Arun
On Fri, Dec 13, 2013 at 10:42 AM, Arun Kumar K arun
Hi Rob,
On Fri, Feb 07, 2014 at 02:33:27PM +, Rob Herring wrote:
On Thu, Feb 6, 2014 at 8:41 AM, James Hogan james.ho...@imgtec.com wrote:
Hi Rob,
On 06/02/14 14:33, Rob Herring wrote:
On Fri, Jan 17, 2014 at 7:58 AM, James Hogan james.ho...@imgtec.com
wrote:
+Required
kyungmin.p...@samsung.com
---
This patch adds missing documentation [1] for the samsung,s5k6a3
compatible. Rob, can you please merge it through your tree if it
looks OK ?
Anyone cares to Ack this patch so it can be merged through the media
tree ?
It looks fine to me:
Acked-by: Mark
;
+ };
+ };
+ };
+};
+
+spi@1392000 {
+ ...
+ s5c73m3_spi: s5c73m3 {
Nit: this should have a 0 unit-address to match the reg.
+ compatible = samsung,s5c73m3;
+ reg = 0;
+ ...
+ };
+};
Otherwise I don't see anything problematic about the binding.
Acked-by: Mark
On Thu, Feb 20, 2014 at 07:40:30PM +, Sylwester Nawrocki wrote:
This patch documents following updates of the Exynos4 SoC camera subsystem
devicetree binding:
- addition of #clock-cells property to 'camera' node - the #clock-cells
property is needed when the sensor sub-devices use
On Thu, Feb 20, 2014 at 07:40:34PM +, Sylwester Nawrocki wrote:
This patch adds clock provider so the the SCLK_CAM0/1 output clocks
can be accessed by image sensor devices through the clk API.
Signed-off-by: Sylwester Nawrocki s.nawro...@samsung.com
Acked-by: Kyungmin Park
On Tue, Mar 11, 2014 at 04:34:30PM +, Sylwester Nawrocki wrote:
This patch documents following updates of the Exynos4 SoC camera subsystem
devicetree binding:
- addition of #clock-cells and clock-output-names properties to 'camera'
node - these are now needed so the image sensor
On Sat, Jun 21, 2014 at 11:21:47PM +0100, Robert Jarzmik wrote:
Add device-tree support to pxa_camera host driver.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
drivers/media/platform/soc_camera/pxa_camera.c | 77
+-
1 file changed, 75 insertions(+), 2
On Sat, Jun 21, 2014 at 11:21:46PM +0100, Robert Jarzmik wrote:
Add device-tree bindings documentation for pxa_camera driver.
Signed-off-by: Robert Jarzmik robert.jarz...@free.fr
---
.../devicetree/bindings/media/pxa-camera.txt | 39
++
1 file changed, 39
On Wed, Jun 25, 2014 at 08:44:31PM +0100, Robert Jarzmik wrote:
Mark Rutland mark.rutl...@arm.com writes:
On Sat, Jun 21, 2014 at 11:21:46PM +0100, Robert Jarzmik wrote:
+Required properties:
+ - compatible: Should be marvell,pxa27x-qci
Is that x a wildcard? Or is 'x' part of the name
...@samsung.com
Cc: Rob Herring robh...@kernel.org
Cc: Pawel Moll pawel.m...@arm.com
Cc: Mark Rutland mark.rutl...@arm.com
Cc: Ian Campbell ijc+devicet...@hellion.org.uk
Cc: Kumar Gala ga...@codeaurora.org
Cc: devicet...@vger.kernel.org
---
.../bindings/media/exynos-jpeg-codec.txt |9
On Mon, Aug 11, 2014 at 01:05:19PM +0100, Ian Molton wrote:
This patch adds support to the adv7604 driver for reading the default
selected input from the Device tree. If none is provided, the driver will not
select an input without help from userspace.
Tested-by: William Towle
On Wed, Aug 13, 2014 at 01:14:35PM +0100, Ian Molton wrote:
On Mon, 11 Aug 2014 13:19:02 +0100
Mark Rutland mark.rutl...@arm.com wrote:
- - pclk-sample: Pixel clock polarity. Defaults to output on the falling
edge.
+ - pclk-sample: Pixel clock polarity. Defaults to output
Hi,
On Fri, Aug 29, 2014 at 02:28:17PM +0100, Jean-Michel Hautbois wrote:
This patch uses DT in order to parse addresses for dummy devices of adv7604.
If nothing is defined, it uses default addresses.
The main prupose is using two adv76xx on the same i2c bus.
This is rather opaque.
It seems
...@samsung.com
Cc: Rob Herring robh...@kernel.org
Cc: Pawel Moll pawel.m...@arm.com
Cc: Mark Rutland mark.rutl...@arm.com
Cc: Ian Campbell ijc+devicet...@hellion.org.uk
Cc: Kumar Gala ga...@codeaurora.org
Cc: devicet...@vger.kernel.org
---
.../devicetree/bindings/media/samsung-fimc.txt |7
On Fri, Nov 28, 2014 at 12:09:14PM +, Jacek Anaszewski wrote:
On 11/28/2014 12:14 PM, Mark Rutland wrote:
On Fri, Nov 28, 2014 at 09:18:00AM +, Jacek Anaszewski wrote:
This patch adds a description of 'flashes' property
to the samsung-fimc.txt.
Signed-off-by: Jacek Anaszewski
On Fri, Nov 28, 2014 at 02:11:04PM +, Jacek Anaszewski wrote:
On 11/28/2014 01:30 PM, Mark Rutland wrote:
On Fri, Nov 28, 2014 at 12:09:14PM +, Jacek Anaszewski wrote:
On 11/28/2014 12:14 PM, Mark Rutland wrote:
On Fri, Nov 28, 2014 at 09:18:00AM +, Jacek Anaszewski wrote
On Sun, Nov 30, 2014 at 04:26:48PM +, Sakari Ailus wrote:
Document the smiapp device tree properties.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
since v2:
- Cleanups
- Removed clock-names property documentation
- Port node documentation was really endpoint node documentation
Hi,
+Optional properties:
+- maxim,trigger-type : Flash trigger type.
+ Possible trigger types:
+ LEDS_TRIG_TYPE_EDGE (0) - Rising edge of the signal triggers
+ the flash,
+ LEDS_TRIG_TYPE_LEVEL (1) - Strobe pulse length controls duration
+
On Mon, Mar 30, 2015 at 10:52:28AM +0100, Jacek Anaszewski wrote:
This patch adds device tree binding documentation for
the flash cell of the Maxim max77693 multifunctional device.
Signed-off-by: Jacek Anaszewski j.anaszew...@samsung.com
Signed-off-by: Andrzej Hajda a.ha...@samsung.com
On Tue, Nov 17, 2015 at 08:54:38PM +0800, Tiffany Lin wrote:
> From: Andrew-CT Chen
>
> Add a DT binding documentation of Video Processor Unit for the
> MT8173 SoC from Mediatek.
>
> Signed-off-by: Andrew-CT Chen
> ---
>
44 matches
Mail list logo