The firmware loads correctly now!
Which devices requires i2c-dev module? I mean if I want to buy new dvb
devices in addition of hvr-4000 and hvr-1300, should I then avoid some
devices...
Mika
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to
The monitoring application produces a sound indicating the signal quality. The
higher the beep the better the signal quality.
This is useful while mounting the antenna for finding the best position without
having to look at the monitor or without even having a monitor.
Thank you for this! Very
Firstly i built the v4l from: http://linuxtv.org/hg/v4l-dvb (hg clone) as the
card was not detected.
On first reboot after new modules are installed i get a kernel soft lockup
cx88[0]/2: cx2388x based DVB/ATSC card
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1767]
I just merged on
As an owner of cx24116 device you should know that it doesn't allow any AUTO
settings, so you have to create an INI file with all parameters explicitly
specifed (FEC, modulation, rolloff).
I believe this is the main problem.
Also, please take the latest scan-s2, I've done some changes especily
Edgar (gimli) Hucek
Does simple patch work ?
I need your Acked-by :)
Hi, I have only saw one version of your patch in mailing list,
did you send the simpler version somewhere?
Mika
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to
That said, the solution takes the approach of revolutionary as
opposed to evolutionary, which always worries me. While providing a
much more powerful interface, it also means all of the applications
will have to properly support all of the various possible
representations of the data, increasing
True, the ordering is not exactly the same everytime. One will need to
provide PCI Bus related info also to a practical udev configuration to
get things sorted out in a sane way, rather than anything else.
At least in Mandriva, the order and naming of network adapters are
handled by using a