Leadtek Winfast DTV-1000S

[Brad Allen]

Dear Mike,

Have not heard from you in quite some time, has there been any progress on 
getting this card up and running? As I said to you in a previous email it is 
extremely close using the settings for card #156, however it fails to detect 
any DVB-T channels, although the signal strength meter works while its scanning 
for them.

I have not tried the FM component of the card.

Here is lspci -vvv -nn output,

00:0e.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video 
Broadcast Decoder [1131:7130] (rev 01)
Subsystem: LeadTek Research Inc. Device [107d:6655]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR- INTx-
Latency: 32 (21000ns min, 8000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at eb001000 (32-bit, non-prefetchable) [size=1K]
Capabilities: access denied

For anyone else reading this card is a DVB-T and FM receiver using the SAA7130, 
TDA10048 and TDA18271. 

Please let me know if theres anything I can do to be of further assistance.

Thanks,

Brad Allen
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: Leadtek Winfast DTV-1000S

[Brad Allen]

--- mkru...@linuxtv.org wrote:

From: Michael Krufky mkru...@linuxtv.org
To: bra...@tranceaddict.net
Subject: Re: Leadtek Winfast DTV-1000S
Date: Wed, 20 May 2009 18:09:34 -0400

On Tue, May 19, 2009 at 3:50 AM, Brad Allen bra...@tranceaddict.net wrote:
 Dear Michael,

 Ive just bought a Leadtek Winfast DTV-1000S (18271, 14008, 7130 chipset), 
 believing it would work under Linux as the kernel contains drivers for those 
 three chips.

 Upon further investigation neither the SAA7134 or the TDA14008 drivers seem 
 to support the 18271. The SAA7134 driver does however appear to work 
 correctly. It just has no tuner to attach to it.

 I am desperate to get this card working, surely since the drivers for the 
 chips are written its not a huge task. If you would be so kind as to offer 
 your assistance with this issue I have basic C skills and am quite competent 
 in linux so if theres anything at all I can do to assist you please let me 
 know.

 Thanks in advance,

 Brad Allen


Brad,

I pushed support for a similar board today... You may be able to get
your card up and running by using board configuration #156, if you use
my latest code, located here:

http://kernellabs.com/hg/~mk/hvr1110

The board I have uses a saa7131, not a saa7130, so there may be some
minor differences...  Does your board support both analog and DVB-T,
or just DVB-T ?

Apologies for the late reply -- I am usually no better than this :-P

For quicker response, cc the linux-media mailing list in the future :-)

If this works for you, please let me know.  If not, I have some ideas.

Good Luck.

-Mike Krufky

Hi Mike,

Thanks for your reply. I have had a few minutes to try your latest code and I 
have both good and bad news to report.

Firstly all three chips are now correctly detected by the module, previously 
only the SAA7130 was. The DVB device is also now being created whereas before 
it wasn't.

The card is a DVB-T and FM tuner.

Here are the problems:

1) When loading the module I get the error tuner 1-0060: Tuner has no way to 
set tv freq

2) Trying to tune in channels in mythtv fails, it seems to work but nothing is 
detected. The signal strength meter works properly.

3) Attempting to view TV with mplayer fails with the following error:

ERROR OPENING FRONTEND DEVICE /dev/dvb/adapter0/frontend0: ERRNO 
DVB_SET_CHANNEL2, COULDN'T OPEN DEVICES OF CARD: 0, EXIT
ERROR, COULDN'T SET CHANNEL  0: Failed to open dvb://.

Here is the relevant part from dmesg:

[6.453049] Linux video capture interface: v2.00
[7.280900] saa7130/34: v4l2 driver version 0.2.15 loaded
[7.282274] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[7.282345] PCI: setting IRQ 5 as level-triggered
[7.282358] saa7134 :00:0f.0: PCI INT A - Link[LNKC] - GSI 5 (level, 
low) - IRQ 5
[7.282451] saa7130[0]: found at :00:0f.0, rev: 1, irq: 5, latency: 32, 
mmio: 0xea001000
[7.282550] saa7130[0]: subsystem: 107d:6655, board: Hauppauge 
WinTV-HVR1110r3 DVB-T/Hybrid [card=156,insmod option]
[7.282699] saa7130[0]: board init: gpio is 2020009
[7.301147] IRQ 5/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[7.437801] saa7130[0]: i2c eeprom 00: 7d 10 55 66 54 20 1c 00 43 43 a9 1c 
55 d2 b2 92
[7.438219] saa7130[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff 
ff ff ff ff
[7.438541] saa7130[0]: i2c eeprom 20: 01 40 01 01 01 ff 01 03 08 ff 00 8a 
ff ff ff ff
[7.439915] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.440613] saa7130[0]: i2c eeprom 40: ff 35 00 c0 00 10 03 02 ff 04 ff ff 
ff ff ff ff
[7.441307] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.441984] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.442680] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.443374] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.444067] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.444746] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.445441] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.446137] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.446815] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.447511] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.448203] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff
[7.448889] tveeprom 1-0050: Encountered bad packet header [ff]. Corrupt or 
not a Hauppauge eeprom.
[7.448976] saa7130[0]: warning: unknown hauppauge model #0
[7.449059] saa7130[0]: hauppauge eeprom: model=0
[7.517263] tea5767_autodetection: not probed - driver disabled by Kconfig
[7.517359] tuner 1-0060: chip found @ 0xc0 (saa7130[0])
[7.517442] tda829x_attach