True, the ordering is not exactly the same everytime. One will need to
provide PCI Bus related info also to a practical udev configuration to
get things sorted out in a sane way, rather than anything else.
At least in Mandriva, the order and naming of network adapters are
handled by using a thi
The monitoring application produces a sound indicating the signal quality. The
higher the beep the better the signal quality.
This is useful while mounting the antenna for finding the best position without
having to look at the monitor or without even having a monitor.
Thank you for this! Very
The firmware loads correctly now!
Which devices requires i2c-dev module? I mean if I want to buy new dvb
devices in addition of hvr-4000 and hvr-1300, should I then avoid some
devices...
Mika
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message t
That said, the solution takes the approach of "revolutionary" as
opposed to "evolutionary", which always worries me. While providing a
much more powerful interface, it also means all of the applications
will have to properly support all of the various possible
representations of the data, increas
Edgar (gimli) Hucek
Does simple patch work ?
I need your Acked-by :)
Hi, I have only saw one version of your patch in mailing list,
did you send the simpler version somewhere?
Mika
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@
I also can confirm this. Reverting to a previous revision restores
proper tuning to vertical transponders.
I can also confirm it with hvr-4000 and latest drivers v4l-dvb drivers
from linuxtv org. Before I reverted this patch, I could not get lock
with vdr for example to:
Sky News;BT:11597:vC
As an owner of cx24116 device you should know that it doesn't allow any AUTO
settings, so you have to create an INI file with all parameters explicitly
specifed (FEC, modulation, rolloff).
I believe this is the main problem.
Also, please take the latest scan-s2, I've done some changes especily f
I also run it with "-5".
I personaly don't like to use network advertisements (-n switch) since I
don't trust them.
I use a full frequency filled INI file.
Hi
It might be that the signal is not the best possible for me as I can only
scan about 500 channels with scan by using a command:
./scan
Firstly i built the v4l from: http://linuxtv.org/hg/v4l-dvb (hg clone) as the
card was not detected.
On first reboot after new modules are installed i get a kernel soft lockup
cx88[0]/2: cx2388x based DVB/ATSC card
BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1767]
I just merged on htt
I don't think these changes were ever merged in. I noticed newer
activity in your dev tree though since this request. Is it safe to
grab that as well, or should I go back to this date?
They should be safe. Please note that I'm recovering from a hard down
of my main machine [root partition super
I don't have the hardware to test with. Please try this patch.
Hi
I tested the patch and it helped me to get the drivers back to normal
state! My system has hvr-1300 and hvr-4000 and only 1 lnb without diseq.
I am using 2.6.27.7 kernel and I did two test runs.
- First I build the current dr
Hi
I checked out and build today the latest vl4-dvb drivers
(changeset: 10210:985ecd81d993) against the 2.6.27.1 kernel
and the drivers segfaults on load for me.
Attached is the segfault + /proc/interrupts output.
I have in my system both the hvr-1300 and hvr-4000.
Last driver version that I
12 matches
Mail list logo