name.
Signed-off-by: Samuel Rakitničan samuel.rakitni...@gmail.com
k100.diff
Description: Binary data
On Fri, 06 Jan 2012 17:32:06 +0100, Samuel Rakitničan
samuel.rakitni...@gmail.com wrote:
This remote was added with support for card Compro VideoMate M1F.
This remote is shipped with various Compro cards, not this one only.
Furthermore this remote can be bought separately under name Compro
Hi,
Attached updated patch for Croatia. Most of the updates are for MUX D as
it's in phase of implementation. Removed MUX C (experimental HD mux) as
it's no longer emitted.
Best regards,
Samuel
hr-All.patch
Description: Binary data
Hi,
Some channel changed, also added additional mux for all regions. Digital
switch over was done for the whole country so channels should be changing
less frequently now.
Best regards,
Samuel
hr-All.diff
Description: Binary data
On Sun, 24 Oct 2010 13:50:02 +0200, Christoph Pfister
christophpfis...@gmail.com wrote:
2010/10/24 Samuel Rakitničan samuel.rakitni...@gmail.com:
Hi,
Some channel changed, also added additional mux for all regions. Digital
switch over was done for the whole country so channels should
On Mon, 07 Jun 2010 09:07:24 +0200, Jan-Pascal van Best
janpas...@vanbest.org wrote:
Hi all,
Not sure if this is the right list, but here it goes: Google does not
seem
to find pages in the linuxtv.org wiki. Nor does any of the other search
Hi,
I'm not an expert, but I read somewhere
On Wed, 02 Jun 2010 20:27:59 +0200, Davor Emard davorem...@gmail.com
wrote:
HI!
Have you tested my lastest GPIO suggestion, or come up
with your own initialization? Does it allow
to load firmware without windows booting?
Didn't have time to look for gpios, tomorrow I will have. But I can
Sorry, here's the attachments.
On Sun, 16 May 2010 12:38:03 +0200, semiRocket semiroc...@gmail.com
wrote:
On Mon, 10 May 2010 01:15:35 +0200, Emard davorem...@gmail.com wrote:
HI
This is even more cleanup from spaces into tabs
and replacing KEY_BACKSPACE with KEY_BACK
which I think is
Additional build errors found after disabling the non building modules
on todays mercurial tree.
Best regards,
Samuel
bash-3.1# uname -r
2.6.29.6-smp
CC [M] /root/v4l-dvb/v4l/saa7134-input.o
/root/v4l-dvb/v4l/saa7134-input.c: In function 'saa7134_set_i2c_ir':
On Sun, 09 May 2010 19:32:43 +0200, Emard davorem...@gmail.com wrote:
Hmm, power on is pure hardware thing on this card I think, it
doesn't need a driver.
But it seems it needs a driver. Although pin is connected to MB power
switch,
the card has to be in certain state (GPIOs programmed,
--- hr-All 2010-05-02 01:32:22.0 +0200
+++ hr-All.new 2010-05-02 01:30:14.0 +0200
@@ -12,9 +12,9 @@
T 59400 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 61800 8MHz 3/4 NONE QAM64 8k 1/4 NONE
T 64200 8MHz 3/4 NONE QAM64 8k 1/4 NONE
-T 65000 8MHz 2/3 NONE QAM64 8k 1/8
Hi,
I have an old bt878 based analog card. It's 'Hauppauge WinTV Radio' model 44914,
rev C121.
I'm trying to workout support for this shipped remote control. I have
tried to add
following lines to bttv-cards.c and bttv-input.c, but that gived
really bad results
(dmesg output is in attachment).
Hi,
On Sat, 18 Jul 2009 02:58:56 +0200, hermann pitton
hermann-pit...@arcor.de wrote:
(full log: http://pastebin.com/f5f8e6184)
Hi Samuel,
the above link still gives error not found.
Strange, because to me works just fine. I'm going to add it directly as an
email attachement this
13 matches
Mail list logo