On Fri, 12 Jun 2009 01:01:59 +0200 Hans Verkuil (HV) wrote:
HV> I've fixed the problem in my original patch. I've attached the new
HV> version. It works fine with ivtv, the problems with reading the eeprom
HV> are now fixed. Please test and if it still doesn't work then I'll have
HV> to install my
On Thu, 11 Jun 2009 23:46:48 +0200 Hans Verkuil (HV) wrote:
HV> Hmm, my patch needs a bit more work. But to get your setup working try to
HV> revert the change you made and do just this:
HV>
HV> Go to drivers/media/video/Makefile and move this line:
HV>
HV> obj-$(CONFIG_VIDEO_MSP3400) += msp3400
On Thu, 11 Jun 2009 22:18:10 +0200 Hans Verkuil (HV) wrote:
HV> On Thursday 11 June 2009 22:14:02 Udo A. Steinberg wrote:
HV> > Hi all,
HV> >
HV> > With Linux 2.6.30 the BTTV driver for my WinTV card claims
HV> >
HV> > bttv0: audio absent, no audio device f
Hi all,
With Linux 2.6.30 the BTTV driver for my WinTV card claims
bttv0: audio absent, no audio device found!
and audio does not work. This worked up to and including 2.6.29. Is this a
known issue? Does anyone have a fix or a patch for me to try?
Cheers,
- Udo
Output for 2.6
On Thu, 26 Mar 2009 12:45:18 -0400 Steven Toth (ST) wrote:
ST> I too tend to have multiple remotes, I don't think it's that unusual for
ST> long standing Hauppauge customers to have many boards with many types of
ST> remotes.
ST>
ST> > It might be better to have an option to explicitly allow old
Mauro,
This patch allows users with multiple remotes to specify an RC5 address for a
remote from which key codes will be accepted. If no address is specified, the
default value of 0 accepts key codes from any remote. This replaces the current
hard-coded address checks, which are too restrictive.
On Thu, 26 Mar 2009 00:26:47 + Darron Broad (DB) wrote:
DB> It's something I forget to deal with in that patch. A solution
DB> would be to allow a device address to be a module param to
DB> override the more modern addresses of 0x1e and 0x1f.
DB>
DB> I can't remember addresses off the top of
Hi,
The following patch
http://kerneltrap.org/mailarchive/git-commits-head/2008/10/13/3643574
that was added between 2.6.27 and 2.6.28 has resulted in my Hauppauge
WinTV IR remote not working anymore. I've tracked down the breakage to:
if (dev!=0x1e && dev!=0x1f)
return 0;
in drivers/media/vi