An updated patch that includes the PxDVR3200 H (107d:6f39) support is
now available at http://istvanv.users.sourceforge.net/v4l/xc4000.html.
On 03/22/2010 07:33 PM, istva...@mailbox.hu wrote:
On 03/15/2010 05:15 AM, Devin Heitmueller wrote:
I'll try to go through my tree and see if I can get
On 03/15/2010 05:15 AM, Devin Heitmueller wrote:
I'll try to go through my tree and see if I can get something upstream
this week which you could build on.
Are there any news on this ?
By the way, I have just received this mail from Mirek Slugen, with a
patch for PxDVR3200 with XC4000 tuner.
On 03/15/2010 05:15 AM, Devin Heitmueller wrote:
I've done essentially no analysis into the tuning performance of the
current driver - validating different frequency ranges and modulation
types or bandwidths. I've done no testing of tuning lock time,
minimal application validation
Well, so
On 02/18/2010 01:11 AM, Devin Heitmueller wrote:
Yeah, my plan at this point was to submit a PULL request once I felt
the driver is stable
For those particular cards that my patch adds support for, it seems to
be stable, and I have been using it for months. Perhaps stability issues
in xc4000.c
On Sun, Mar 14, 2010 at 1:58 PM, istva...@mailbox.hu
istva...@mailbox.hu wrote:
On 02/18/2010 01:11 AM, Devin Heitmueller wrote:
Yeah, my plan at this point was to submit a PULL request once I felt
the driver is stable
For those particular cards that my patch adds support for, it seems to
I have finally received some feedback on DVB-T, and it reportedly works,
although with a minor bug: it was necessary to use the cable connector
instead of the antenna one. There is an updated patch at the web page
http://www.sharemation.com/IstvanV/v4l/xc4000.html that attempts to
correct this
Well, it is not really a problem, if it is not merged, so this updated
version is only for those who want to test it:
http://www.sharemation.com/IstvanV/v4l/xc4000-winfast-14021dfc00f3.patch
- in xc4000.c, power management may default to on or off depending on
the card type
- autodetects
Hi Istvan,
istva...@mailbox.hu wrote:
The attached new patches contain all the previous changes merged, and
are against the latest v4l-dvb revision.
Please provide your Signed-off-by. This is a basic requirement for your
driver to be accepted. Please read:
On Wed, Feb 17, 2010 at 6:51 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Hi Istvan,
istva...@mailbox.hu wrote:
The attached new patches contain all the previous changes merged, and
are against the latest v4l-dvb revision.
Please provide your Signed-off-by. This is a basic
Devin Heitmueller wrote:
On Wed, Feb 17, 2010 at 6:51 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
Hi Istvan,
istva...@mailbox.hu wrote:
The attached new patches contain all the previous changes merged, and
are against the latest v4l-dvb revision.
Please provide your Signed-off-by.
On Wed, Feb 17, 2010 at 7:08 PM, Mauro Carvalho Chehab
mche...@redhat.com wrote:
OK. Then, I need your SOB for the 95% of the code, and his SOB for the
remaining ;)
Yeah, my plan at this point was to submit a PULL request once I felt
the driver is stable (and I had already offered to apply his
Here is another patch, with a few minor changes. It depends on the
previously posted patches, so those should be applied first.
diff -r -d -N -U4 v4l-dvb-28f5eca12bb0.old/linux/drivers/media/common/tuners/xc4000.c v4l-dvb-28f5eca12bb0/linux/drivers/media/common/tuners/xc4000.c
---
A correction to the previous post: this line:
if (WaitForLock(priv) == 0)
should actually be:
if (WaitForLock(priv) != 1)
It does not have an effect on the operation of the driver, though,
since the value set depending on this line is not used.
--
To unsubscribe
Update: the following patch, which should be applied after the previous
ones, makes a few additional changes to the XC4000 driver:
- adds support for DTV7
- implements power management
- adds a mutex and locking for tuner operations
- some unused or unneeded code has been removed
On
Hi Istanv,
On Thu, Feb 11, 2010 at 2:16 PM, istva...@mailbox.hu
istva...@mailbox.hu wrote:
Update: the following patch, which should be applied after the previous
ones, makes a few additional changes to the XC4000 driver:
- adds support for DTV7
- implements power management
- adds a
I have an updated version now, with these changes:
- the firmware file name can be specified with the firmware_name
module parameter; it defaults to xc4000.fw
- there is another new module parameter (audio_std) for configuring
the audio standard (NICAM, A2, etc.), and switching FM
On Thu, Jan 7, 2010 at 2:49 PM, istva...@mailbox.hu istva...@mailbox.hu wrote:
On 01/05/2010 02:25 AM, Raena Lea-Shannon wrote:
Thanks. Will try again later.
By the way, for those who would like to test it, here is a patch based
on Devin Heitmueller's XC4000 driver and Mirek Slugen's older
On 01/07/2010 09:00 PM, Devin Heitmueller wrote:
Could you please do me a favor and rename your firmware file, both in
the patch and the file you are redistributing (perhaps as
dvb-fe-xc4000-1.4.1-istanv.fw)? I worry that by redistributing a file
with the exact same name as the official
Samuel Rakitnican wrote:
On Sun, 03 Jan 2010 09:21:21 +0100, Raena Lea-Shannon
r...@internode.on.net wrote:
istva...@mailbox.hu wrote:
On 01/02/2010 05:10 PM, Raena Lea-Shannon wrote:
I have 2 TV Cards. The DTV2000 H Plus and a Technisat. The Technisat
works very well. I am trying to
On 01/03/2010 09:21 AM, Raena Lea-Shannon wrote:
That seems odd. This patch on the LinuxTv site
http://www.linuxtv.org/pipermail/linux-dvb/2008-June/026379.html
seems to be using the cx88 drivers?
Unfortunately, this patch is for the older DTV 2000H (not Plus)
card, which uses a Philips
istva...@mailbox.hu wrote:
On 01/03/2010 09:21 AM, Raena Lea-Shannon wrote:
That seems odd. This patch on the LinuxTv site
http://www.linuxtv.org/pipermail/linux-dvb/2008-June/026379.html
seems to be using the cx88 drivers?
Unfortunately, this patch is for the older DTV 2000H (not Plus)
istva...@mailbox.hu wrote:
On 01/02/2010 05:10 PM, Raena Lea-Shannon wrote:
I have 2 TV Cards. The DTV2000 H Plus and a Technisat. The Technisat
works very well. I am trying to get the DVT working for other video
input devices such as VCR to make copies of old Videos and an inteface
for my
On Sun, 03 Jan 2010 09:21:21 +0100, Raena Lea-Shannon
r...@internode.on.net wrote:
istva...@mailbox.hu wrote:
On 01/02/2010 05:10 PM, Raena Lea-Shannon wrote:
I have 2 TV Cards. The DTV2000 H Plus and a Technisat. The Technisat
works very well. I am trying to get the DVT working for
I have 2 TV Cards. The DTV2000 H Plus and a Technisat. The Technisat
works very well. I am trying to get the DVT working for other video
input devices such as VCR to make copies of old Videos and an inteface
for my N95 video out.
I do not seem to be able to get it to find a tuner. Seems to be
PS:
I have tried modprobe and insmode card=51 and card=82 and card=0 with no
luck.
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/02/2010 05:10 PM, Raena Lea-Shannon wrote:
I have 2 TV Cards. The DTV2000 H Plus and a Technisat. The Technisat
works very well. I am trying to get the DVT working for other video
input devices such as VCR to make copies of old Videos and an inteface
for my N95 video out.
I do not
26 matches
Mail list logo