RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-kariche...@ti.com -Original Message- From: Hiremath, Vaibhav Sent: Thursday, May 27, 2010 9:11 AM To: linux-media@vger.kernel.org Cc: mche...@redhat.com; Karicheri, Muralidharan; linux- o...@vger.kernel.org; Hiremath, Vaibhav Subject: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices From: Vaibhav Hiremath hvaib...@ti.com Currently VPFE Capture driver and DM6446 CCDC driver is being reused for AM3517. So this patch is preparing the Kconfig/makefile for re-use of such IP's. Signed-off-by: Vaibhav Hiremath hvaib...@ti.com --- drivers/media/video/Kconfig | 61 +-- drivers/media/video/Makefile|2 +- drivers/media/video/davinci/Kconfig | 93 +++ 3 files changed, 95 insertions(+), 61 deletions(-) create mode 100644 drivers/media/video/davinci/Kconfig diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ad9e6f9..e5d74ae 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -570,66 +570,7 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -config VIDEO_VPSS_SYSTEM - tristate VPSS System module driver - depends on ARCH_DAVINCI - help -Support for vpss system module for video driver - -config VIDEO_VPFE_CAPTURE - tristate VPFE Video Capture Driver - depends on VIDEO_V4L2 ARCH_DAVINCI - select VIDEOBUF_DMA_CONTIG - help -Support for DM VPFE based frame grabber. This is the -common V4L2 module for following DMXXX SoCs from Texas -Instruments:- DM6446 DM355. - Vaibhav, Could you also list DM365 here? This was somehow missed. -To compile this driver as a module, choose M here: the -module will be called vpfe-capture. - -config VIDEO_DM6446_CCDC - tristate DM6446 CCDC HW module - depends on ARCH_DAVINCI_DM644x VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_DM355_CCDC - tristate DM355 CCDC HW module - depends on ARCH_DAVINCI_DM355 VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_ISIF - tristate ISIF HW module - depends on ARCH_DAVINCI_DM365 VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - To compile this driver as a module, choose M here: the - module will be called vpfe. +source drivers/media/video/davinci/Kconfig source drivers/media/video/omap/Kconfig diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index cc93859..aa1ea2f 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o -obj-$(CONFIG_ARCH_DAVINCI)+= davinci/ +obj-y += davinci/ obj-$(CONFIG_ARCH_OMAP) += omap/ diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig new file mode 100644 index 000..97f889d --- /dev/null +++ b/drivers/media/video/davinci/Kconfig @@ -0,0 +1,93 @@ +config DISPLAY_DAVINCI_DM646X_EVM + tristate DM646x EVM Video Display + depends on VIDEO_DEV MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303 + help +Support for DM6467 based display device. + +To compile this driver as a module, choose M here: the +module will be called vpif_display. + +config CAPTURE_DAVINCI_DM646X_EVM + tristate DM646x EVM Video Capture + depends on VIDEO_DEV MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + help +Support for DM6467 based capture device. + +
RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
From: Karicheri, Muralidharan Sent: Wednesday, June 02, 2010 7:23 PM To: Hiremath, Vaibhav; linux-media@vger.kernel.org Cc: mche...@redhat.com; linux-o...@vger.kernel.org Subject: RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-kariche...@ti.com -Original Message- From: Hiremath, Vaibhav Sent: Thursday, May 27, 2010 9:11 AM To: linux-media@vger.kernel.org Cc: mche...@redhat.com; Karicheri, Muralidharan; linux- o...@vger.kernel.org; Hiremath, Vaibhav Subject: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices From: Vaibhav Hiremath hvaib...@ti.com Currently VPFE Capture driver and DM6446 CCDC driver is being reused for AM3517. So this patch is preparing the Kconfig/makefile for re-use of such IP's. Signed-off-by: Vaibhav Hiremath hvaib...@ti.com --- drivers/media/video/Kconfig | 61 +-- drivers/media/video/Makefile|2 +- drivers/media/video/davinci/Kconfig | 93 +++ 3 files changed, 95 insertions(+), 61 deletions(-) create mode 100644 drivers/media/video/davinci/Kconfig diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index ad9e6f9..e5d74ae 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -570,66 +570,7 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. -config VIDEO_VPSS_SYSTEM - tristate VPSS System module driver - depends on ARCH_DAVINCI - help -Support for vpss system module for video driver - -config VIDEO_VPFE_CAPTURE - tristate VPFE Video Capture Driver - depends on VIDEO_V4L2 ARCH_DAVINCI - select VIDEOBUF_DMA_CONTIG - help -Support for DM VPFE based frame grabber. This is the -common V4L2 module for following DMXXX SoCs from Texas -Instruments:- DM6446 DM355. - Vaibhav, Could you also list DM365 here? This was somehow missed. I believe you are referring to Instruments:- DM6446, DM365 DM355 Submitting this patch alone with this change. Thanks, Vaibhav -To compile this driver as a module, choose M here: the -module will be called vpfe-capture. - -config VIDEO_DM6446_CCDC - tristate DM6446 CCDC HW module - depends on ARCH_DAVINCI_DM644x VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_DM355_CCDC - tristate DM355 CCDC HW module - depends on ARCH_DAVINCI_DM355 VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_ISIF - tristate ISIF HW module - depends on ARCH_DAVINCI_DM365 VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - To compile this driver as a module, choose M here: the - module will be called vpfe. +source drivers/media/video/davinci/Kconfig source drivers/media/video/omap/Kconfig diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index cc93859..aa1ea2f 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o -obj-$(CONFIG_ARCH_DAVINCI)+= davinci/ +obj-y += davinci/ obj-$(CONFIG_ARCH_OMAP) += omap/ diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig new file mode 100644 index 000..97f889d --- /dev/null +++ b/drivers/media/video/davinci/Kconfig @@ -0,0 +1,93 @@ +config DISPLAY_DAVINCI_DM646X_EVM + tristate DM646x EVM Video Display + depends on VIDEO_DEV MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303
RE: [PATCH 1/2] Davinci: Create seperate Kconfig file for davinci devices
Vaibhav, Could you also list DM365 here? This was somehow missed. I believe you are referring to Instruments:- DM6446, DM365 DM355 yes. Thanks. Submitting this patch alone with this change. Thanks, Vaibhav -To compile this driver as a module, choose M here: the -module will be called vpfe-capture. - -config VIDEO_DM6446_CCDC - tristate DM6446 CCDC HW module - depends on ARCH_DAVINCI_DM644x VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from slave decoders. - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_DM355_CCDC - tristate DM355 CCDC HW module - depends on ARCH_DAVINCI_DM355 VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables DM355 CCD hw module. DM355 CCDC hw interfaces - with decoder modules such as TVP5146 over BT656 or - sensor module such as MT9T001 over a raw interface. This - module configures the interface and CCDC/ISIF to do - video frame capture from a slave decoders - - To compile this driver as a module, choose M here: the - module will be called vpfe. - -config VIDEO_ISIF - tristate ISIF HW module - depends on ARCH_DAVINCI_DM365 VIDEO_VPFE_CAPTURE - select VIDEO_VPSS_SYSTEM - default y - help - Enables ISIF hw module. This is the hardware module for - configuring ISIF in VPFE to capture Raw Bayer RGB data from - a image sensor or YUV data from a YUV source. - - To compile this driver as a module, choose M here: the - module will be called vpfe. +source drivers/media/video/davinci/Kconfig source drivers/media/video/omap/Kconfig diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index cc93859..aa1ea2f 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -177,7 +177,7 @@ obj-$(CONFIG_VIDEO_SAA7164) += saa7164/ obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o -obj-$(CONFIG_ARCH_DAVINCI)+= davinci/ +obj-y += davinci/ obj-$(CONFIG_ARCH_OMAP) += omap/ diff --git a/drivers/media/video/davinci/Kconfig b/drivers/media/video/davinci/Kconfig new file mode 100644 index 000..97f889d --- /dev/null +++ b/drivers/media/video/davinci/Kconfig @@ -0,0 +1,93 @@ +config DISPLAY_DAVINCI_DM646X_EVM + tristate DM646x EVM Video Display + depends on VIDEO_DEV MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + select VIDEO_ADV7343 + select VIDEO_THS7303 + help +Support for DM6467 based display device. + +To compile this driver as a module, choose M here: the +module will be called vpif_display. + +config CAPTURE_DAVINCI_DM646X_EVM + tristate DM646x EVM Video Capture + depends on VIDEO_DEV MACH_DAVINCI_DM6467_EVM + select VIDEOBUF_DMA_CONTIG + select VIDEO_DAVINCI_VPIF + help +Support for DM6467 based capture device. + +To compile this driver as a module, choose M here: the +module will be called vpif_capture. + +config VIDEO_DAVINCI_VPIF + tristate DaVinci VPIF Driver + depends on DISPLAY_DAVINCI_DM646X_EVM + help +Support for DaVinci VPIF Driver. + +To compile this driver as a module, choose M here: the +module will be called vpif. + +config VIDEO_VPSS_SYSTEM + tristate VPSS System module driver + depends on ARCH_DAVINCI + help +Support for vpss system module for video driver + +config VIDEO_VPFE_CAPTURE + tristate VPFE Video Capture Driver + depends on VIDEO_V4L2 (ARCH_DAVINCI || ARCH_OMAP3) + select VIDEOBUF_DMA_CONTIG + help +Support for DMx/AMx VPFE based frame grabber. This is the +common V4L2 module for following DMx/AMx SoCs from Texas +Instruments:- DM6446, DM355 AM3517/05. + +To compile this driver as a module, choose M here: the +module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate DM6446 CCDC HW module + depends on VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate DM355
