Unfortunately, captions are new on Sphinx for c blocks: it was
added only on version 1.3. Also, it were already bad enough
not being able to auto-numerate them.
So, let's give up and use, instead, titles before the examples.
Not much is lost, and, as a side track, we don't need to
numerate them anymore.
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
Documentation/media/uapi/dvb/dvbproperty.rst | 7 ++++++-
Documentation/media/uapi/dvb/examples.rst | 8 ++++----
Documentation/media/uapi/v4l/audio.rst | 8 ++++++--
Documentation/media/uapi/v4l/control.rst | 11 ++++++++---
Documentation/media/uapi/v4l/crop.rst | 9 +++++++--
Documentation/media/uapi/v4l/dev-osd.rst | 3 ++-
Documentation/media/uapi/v4l/dmabuf.rst | 10 +++++++---
Documentation/media/uapi/v4l/mmap.rst | 7 +++++--
Documentation/media/uapi/v4l/selection-api-006.rst | 9 ++++++---
Documentation/media/uapi/v4l/standard.rst | 9 ++++++---
Documentation/media/uapi/v4l/userp.rst | 3 ++-
Documentation/media/uapi/v4l/video.rst | 8 ++++++--
12 files changed, 65 insertions(+), 27 deletions(-)
diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst
b/Documentation/media/uapi/dvb/dvbproperty.rst
index 9b3782c5bb44..3c348e585729 100644
--- a/Documentation/media/uapi/dvb/dvbproperty.rst
+++ b/Documentation/media/uapi/dvb/dvbproperty.rst
@@ -48,8 +48,13 @@ symbol rate of 5.217 Mbauds, those properties should be sent
to
- :ref:`DTV_TUNE <DTV-TUNE>`
-The code that would do the above is:
+The code that would that would do the above is show in
+:ref:`dtv-prop-example`.
+.. _dtv-prop-example:
+
+Example: Setting digital TV frontend properties
+===============================================
.. code-block:: c
diff --git a/Documentation/media/uapi/dvb/examples.rst
b/Documentation/media/uapi/dvb/examples.rst
index 64e029ecd047..ead3ddf764c0 100644
--- a/Documentation/media/uapi/dvb/examples.rst
+++ b/Documentation/media/uapi/dvb/examples.rst
@@ -17,8 +17,8 @@ updated/recommended examples.
.. _tuning:
-Tuning
-======
+Example: Tuning
+===============
We will start with a generic tuning subroutine that uses the frontend
and SEC, as well as the demux devices. The example is given for QPSK
@@ -238,8 +238,8 @@ switch, and weather conditions this may be necessary.
.. _the_dvr_device:
-The DVR device
-==============
+Example: The DVR device
+========================
The following program code shows how to use the DVR device for
recording.
diff --git a/Documentation/media/uapi/v4l/audio.rst
b/Documentation/media/uapi/v4l/audio.rst
index 71502f0bf8bd..47f8334f071e 100644
--- a/Documentation/media/uapi/v4l/audio.rst
+++ b/Documentation/media/uapi/v4l/audio.rst
@@ -54,8 +54,10 @@ in the struct :ref:`v4l2_capability <v4l2-capability>`
returned by
the :ref:`VIDIOC_QUERYCAP` ioctl.
+Example: Information about the current audio input
+==================================================
+
.. code-block:: c
- :caption: Example 1.3. Information about the current audio input
struct v4l2_audio audio;
@@ -69,8 +71,10 @@ the :ref:`VIDIOC_QUERYCAP` ioctl.
printf("Current input: %s\\n", audio.name);
+Example: Switching to the first audio input
+===========================================
+
.. code-block:: c
- :caption: Example 1.4. Switching to the first audio input
struct v4l2_audio audio;
diff --git a/Documentation/media/uapi/v4l/control.rst
b/Documentation/media/uapi/v4l/control.rst
index 6cf218ab36fb..feb55ac14377 100644
--- a/Documentation/media/uapi/v4l/control.rst
+++ b/Documentation/media/uapi/v4l/control.rst
@@ -373,8 +373,10 @@ more menu type controls.
.. _enum_all_controls:
+Example: Enumerating all user controls
+======================================
+
.. code-block:: c
- :caption: Example 1.8. Enumerating all user controls
struct v4l2_queryctrl queryctrl;
@@ -438,8 +440,10 @@ more menu type controls.
}
+Example: Enumerating all user controls (alternative)
+====================================================
+
.. code-block:: c
- :caption: Example 1.9. Enumerating all user controls (alternative)
memset(&queryctrl, 0, sizeof(queryctrl));
@@ -462,9 +466,10 @@ more menu type controls.
exit(EXIT_FAILURE);
}
+Example: Changing controls
+==========================
.. code-block:: c
- :caption: Example 1.10. Changing controls
struct v4l2_queryctrl queryctrl;
struct v4l2_control control;
diff --git a/Documentation/media/uapi/v4l/crop.rst
b/Documentation/media/uapi/v4l/crop.rst
index ed43b36c51d8..bf1f487250fe 100644
--- a/Documentation/media/uapi/v4l/crop.rst
+++ b/Documentation/media/uapi/v4l/crop.rst
@@ -147,8 +147,10 @@ ensure the parameters are suitable before starting I/O.
**NOTE:** on the next two examples, a video capture device is assumed;
change ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other types of device.
+Example: Resetting the cropping parameters
+==========================================
+
.. code-block:: c
- :caption: Example 1.11. Resetting the cropping parameters
struct v4l2_cropcap cropcap;
struct v4l2_crop crop;
@@ -173,8 +175,11 @@ change ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other types of
device.
exit (EXIT_FAILURE);
}
+
+Example: Simple downscaling
+===========================
+
.. code-block:: c
- :caption: Example 1.12. Simple downscaling
struct v4l2_cropcap cropcap;
struct v4l2_format format;
diff --git a/Documentation/media/uapi/v4l/dev-osd.rst
b/Documentation/media/uapi/v4l/dev-osd.rst
index b9b53fd7eb5d..98570cea63a5 100644
--- a/Documentation/media/uapi/v4l/dev-osd.rst
+++ b/Documentation/media/uapi/v4l/dev-osd.rst
@@ -50,9 +50,10 @@ standard. A V4L2 driver may reject attempts to change the
video standard
(or any other ioctl which would imply a framebuffer size change) with an
``EBUSY`` error code until all applications closed the framebuffer device.
+Example: Finding a framebuffer device for OSD
+---------------------------------------------
.. code-block:: c
- :caption: Example 4.1. Finding a framebuffer device for OSD
#include <linux/fb.h>
diff --git a/Documentation/media/uapi/v4l/dmabuf.rst
b/Documentation/media/uapi/v4l/dmabuf.rst
index 474d8c021507..57917fb98c7a 100644
--- a/Documentation/media/uapi/v4l/dmabuf.rst
+++ b/Documentation/media/uapi/v4l/dmabuf.rst
@@ -37,8 +37,10 @@ driver must be switched into DMABUF I/O mode by calling the
:ref:`VIDIOC_REQBUFS <VIDIOC_REQBUFS>` with the desired buffer type.
+Example: Initiating streaming I/O with DMABUF file descriptors
+==============================================================
+
.. code-block:: c
- :caption: Example 3.4. Initiating streaming I/O with DMABUF file
descriptors
struct v4l2_requestbuffers reqbuf;
@@ -62,9 +64,10 @@ buffers, every plane can be associated with a different
DMABUF
descriptor. Although buffers are commonly cycled, applications can pass
a different DMABUF descriptor at each :ref:`VIDIOC_QBUF <VIDIOC_QBUF>` call.
+Example: Queueing DMABUF using single plane API
+===============================================
.. code-block:: c
- :caption: Example 3.5. Queueing DMABUF using single plane API
int buffer_queue(int v4lfd, int index, int dmafd)
{
@@ -84,9 +87,10 @@ a different DMABUF descriptor at each :ref:`VIDIOC_QBUF
<VIDIOC_QBUF>` call.
return 0;
}
+Example 3.6. Queueing DMABUF using multi plane API
+==================================================
.. code-block:: c
- :caption: Example 3.6. Queueing DMABUF using multi plane API
int buffer_queue_mp(int v4lfd, int index, int dmafd[], int n_planes)
{
diff --git a/Documentation/media/uapi/v4l/mmap.rst
b/Documentation/media/uapi/v4l/mmap.rst
index f7fe26e7ca43..b01f4486499a 100644
--- a/Documentation/media/uapi/v4l/mmap.rst
+++ b/Documentation/media/uapi/v4l/mmap.rst
@@ -52,9 +52,10 @@ allocated in physical memory, as opposed to virtual memory,
which can be
swapped out to disk. Applications should free the buffers as soon as
possible with the :ref:`munmap() <func-munmap>` function.
+Example: Mapping buffers in the single-planar API
+=================================================
.. code-block:: c
- :caption: Example 3.1. Mapping buffers in the single-planar API
struct v4l2_requestbuffers reqbuf;
struct {
@@ -122,8 +123,10 @@ possible with the :ref:`munmap() <func-munmap>` function.
munmap(buffers[i].start, buffers[i].length);
+Example: Mapping buffers in the multi-planar API
+================================================
+
.. code-block:: c
- :caption: Example 3.2. Mapping buffers in the multi-planar API
struct v4l2_requestbuffers reqbuf;
/* Our current format uses 3 planes per buffer */
diff --git a/Documentation/media/uapi/v4l/selection-api-006.rst
b/Documentation/media/uapi/v4l/selection-api-006.rst
index b2ac12f2e3d4..67e0e9aed9e8 100644
--- a/Documentation/media/uapi/v4l/selection-api-006.rst
+++ b/Documentation/media/uapi/v4l/selection-api-006.rst
@@ -8,9 +8,10 @@ Examples
``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other devices; change target to
``V4L2_SEL_TGT_COMPOSE_*`` family to configure composing area)
+Example: Resetting the cropping parameters
+==========================================
.. code-block:: c
- :caption: Example 1.15. Resetting the cropping parameters
struct v4l2_selection sel = {
.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
@@ -27,9 +28,10 @@ Examples
Setting a composing area on output of size of *at most* half of limit
placed at a center of a display.
+Example: Simple downscaling
+===========================
.. code-block:: c
- :caption: Example 1.16. Simple downscaling
struct v4l2_selection sel = {
.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
@@ -55,9 +57,10 @@ placed at a center of a display.
A video output device is assumed; change ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
for other devices
+Example: Querying for scaling factors
+=====================================
.. code-block:: c
- :caption: Example 1.17. Querying for scaling factors
struct v4l2_selection compose = {
.type = V4L2_BUF_TYPE_VIDEO_OUTPUT,
diff --git a/Documentation/media/uapi/v4l/standard.rst
b/Documentation/media/uapi/v4l/standard.rst
index 538588eef317..529891cf3af2 100644
--- a/Documentation/media/uapi/v4l/standard.rst
+++ b/Documentation/media/uapi/v4l/standard.rst
@@ -64,9 +64,10 @@ Applications can make use of the :ref:`input-capabilities`
and
:ref:`output-capabilities` flags to determine whether the video
standard ioctls can be used with the given input or output.
+Example: Information about the current video standard
+=====================================================
.. code-block:: c
- :caption: Example 1.5. Information about the current video standard
v4l2_std_id std_id;
struct v4l2_standard standard;
@@ -100,9 +101,10 @@ standard ioctls can be used with the given input or output.
exit(EXIT_FAILURE);
}
+Example: Listing the video standards supported by the current input
+===================================================================
.. code-block:: c
- :caption: Example 1.6. Listing the video standards supported by the
current input
struct v4l2_input input;
struct v4l2_standard standard;
@@ -139,9 +141,10 @@ standard ioctls can be used with the given input or output.
exit(EXIT_FAILURE);
}
+Example: Selecting a new video standard
+=======================================
.. code-block:: c
- :caption: Example 1.7. Selecting a new video standard
struct v4l2_input input;
v4l2_std_id std_id;
diff --git a/Documentation/media/uapi/v4l/userp.rst
b/Documentation/media/uapi/v4l/userp.rst
index 2f0002bfbc3f..0871c204dc6c 100644
--- a/Documentation/media/uapi/v4l/userp.rst
+++ b/Documentation/media/uapi/v4l/userp.rst
@@ -26,9 +26,10 @@ No buffers (planes) are allocated beforehand, consequently
they are not
indexed and cannot be queried like mapped buffers with the
:ref:`VIDIOC_QUERYBUF <VIDIOC_QUERYBUF>` ioctl.
+Example: Initiating streaming I/O with user pointers
+====================================================
.. code-block:: c
- :caption: Example 3.3. Initiating streaming I/O with user pointers
struct v4l2_requestbuffers reqbuf;
diff --git a/Documentation/media/uapi/v4l/video.rst
b/Documentation/media/uapi/v4l/video.rst
index e38ebe192614..d3f00715fbc1 100644
--- a/Documentation/media/uapi/v4l/video.rst
+++ b/Documentation/media/uapi/v4l/video.rst
@@ -28,8 +28,10 @@ applications call the :ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>`
and
implement all the input ioctls when the device has one or more inputs,
all the output ioctls when the device has one or more outputs.
+Example: Information about the current video input
+==================================================
+
.. code-block:: c
- :caption: Example 1.1. Information about the current video input
struct v4l2_input input;
int index;
@@ -50,8 +52,10 @@ all the output ioctls when the device has one or more
outputs.
printf("Current input: %s\\n", input.name);
+Example: Switching to the first video input
+===========================================
+
.. code-block:: c
- :caption: Example 1.2. Switching to the first video input
int index;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
