On 08/26/2015 03:23 PM, Steven Toth wrote:
Has anyone tested the patch and validated each of the controls continue
to work?
As I said: my saa7146 card is no longer recognized (not sure why), so I
was hoping
you could test it.
OK, will do. I probably won't get to this until the weekend,
On 08/28/2015 09:59 AM, Hans Verkuil wrote:
On 08/26/2015 03:23 PM, Steven Toth wrote:
Has anyone tested the patch and validated each of the controls continue
to work?
As I said: my saa7146 card is no longer recognized (not sure why), so I
was hoping
you could test it.
OK, will do. I
On 08/28/2015 02:44 PM, Steven Toth wrote:
Send me your shipping address _privately_, I talk to Hauppauge about a
replacement.
No need, I managed to get it working if I use a PCI-to-PCIe adapter card.
Very
strange, it won't work in the PCIe slot of my motherboard, but using the PCI
slot
but the default firmware with size 4919072 fails to work (image corrupt),
instead
I need to use the firmware with size 4038864 (v4l-saa7164-1.0.3-3.fw).
That's v4l-saa7164-1.0.2-3.fw, sorry for the confusion.
Right, you need to load the -02 firmware on a -02 board.
Googling suggests that
Send me your shipping address _privately_, I talk to Hauppauge about a
replacement.
No need, I managed to get it working if I use a PCI-to-PCIe adapter card. Very
strange, it won't work in the PCIe slot of my motherboard, but using the PCI
slot
and that adapter it works fine.
Excellent.
but the default firmware with size 4919072 fails to work (image corrupt),
instead
I need to use the firmware with size 4038864 (v4l-saa7164-1.0.3-3.fw).
For that I have to patch the driver.
Take a look at your board, on the main large PCIe IC, its probably
marked as either a REV2 or a
On Sat, Aug 22, 2015 at 8:46 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 08/22/2015 02:06 PM, Steven Toth wrote:
On Sat, Aug 22, 2015 at 6:47 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 08/22/2015 09:24 AM, Ricardo Ribalda Delgado wrote:
Hello Hans
With this patch I guess two of my
On 08/26/15 15:08, Steven Toth wrote:
On Sat, Aug 22, 2015 at 8:46 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 08/22/2015 02:06 PM, Steven Toth wrote:
On Sat, Aug 22, 2015 at 6:47 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 08/22/2015 09:24 AM, Ricardo Ribalda Delgado wrote:
Hello Hans
Has anyone tested the patch and validated each of the controls continue to
work?
As I said: my saa7146 card is no longer recognized (not sure why), so I was
hoping
you could test it.
OK, will do. I probably won't get to this until the weekend, but I'll
put this on my todo list.
That's
On 08/22/2015 09:24 AM, Ricardo Ribalda Delgado wrote:
Hello Hans
With this patch I guess two of my previous patches are not needed.
Shall i resend the patchset or you just cherry pick the appropriate
ones?
Let's see how long it takes before I get an Ack (or not) from Steve. If that's
On Sat, Aug 22, 2015 at 6:47 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 08/22/2015 09:24 AM, Ricardo Ribalda Delgado wrote:
Hello Hans
With this patch I guess two of my previous patches are not needed.
Shall i resend the patchset or you just cherry pick the appropriate
ones?
Let's see
Hello Hans
With this patch I guess two of my previous patches are not needed.
Shall i resend the patchset or you just cherry pick the appropriate
ones?
Thanks!
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More
On 08/22/2015 02:06 PM, Steven Toth wrote:
On Sat, Aug 22, 2015 at 6:47 AM, Hans Verkuil hverk...@xs4all.nl wrote:
On 08/22/2015 09:24 AM, Ricardo Ribalda Delgado wrote:
Hello Hans
With this patch I guess two of my previous patches are not needed.
Shall i resend the patchset or you just
Convert this driver to the control framework. Note that the VBI device
nodes have no controls as there is nothing to control.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
Steve, can you test this patch? For some reason my saa7164 isn't seen anymore
on the PCIe bus, so I can't test it
14 matches
Mail list logo
