Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
Hans, is this commit anywhere in any git repository at the moment? -- Bluecherry developer. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
On 12/17/2014 09:54 PM, Andrey Utkin wrote: Hans, is this commit anywhere in any git repository at the moment? The pull request will go out to Mauro tomorrow. Regards, Hans -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
On 11/05/2014 09:11 PM, Andrey Utkin wrote:
Dropping code (introduced in 316d9e84a72069e04e483de0d5934c1d75f6a44c)
which intends to make raising of motion events more smooth(?).
It made motion event never appear in my installation.
That code is complicated, so I couldn't figure out quickly how to fix
it, so dropping it seems better to me.
Another justification is that anyway application would implement
motion signal stabilization if required, it is not necessarily kernel
driver's job.
Signed-off-by: Andrey Utkin andrey.ut...@corp.bluecherry.net
Acked-by: Hans Verkuil hans.verk...@cisco.com
I have tested this and it looks good. I am not sure what problems I had
originally that caused me to write that code, since it is now functioning
as expected.
So you can expect this patch to be part of the next 3.20 pull request I'll
post.
Sorry for the delay.
Regards,
Hans
---
drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 30
+-
drivers/media/pci/solo6x10/solo6x10.h | 2 --
2 files changed, 1 insertion(+), 31 deletions(-)
diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
index 30e09d9..866f7b3 100644
--- a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
+++ b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
@@ -239,8 +239,6 @@ static int solo_enc_on(struct solo_enc_dev *solo_enc)
if (solo_enc-bw_weight solo_dev-enc_bw_remain)
return -EBUSY;
solo_enc-sequence = 0;
- solo_enc-motion_last_state = false;
- solo_enc-frames_since_last_motion = 0;
solo_dev-enc_bw_remain -= solo_enc-bw_weight;
if (solo_enc-type == SOLO_ENC_TYPE_EXT)
@@ -555,36 +553,12 @@ static int solo_enc_fillbuf(struct solo_enc_dev
*solo_enc,
}
if (!ret) {
- bool send_event = false;
-
vb-v4l2_buf.sequence = solo_enc-sequence++;
vb-v4l2_buf.timestamp.tv_sec = vop_sec(vh);
vb-v4l2_buf.timestamp.tv_usec = vop_usec(vh);
/* Check for motion flags */
- if (solo_is_motion_on(solo_enc)) {
- /* It takes a few frames for the hardware to detect
- * motion. Once it does it clears the motion detection
- * register and it takes again a few frames before
- * motion is seen. This means in practice that when the
- * motion field is 1, it will go back to 0 for the next
- * frame. This leads to motion detection event being
- * sent all the time, which is not what we want.
- * Instead wait a few frames before deciding that the
- * motion has halted. After some experimentation it
- * turns out that waiting for 5 frames works well.
- */
- if (enc_buf-motion == 0
- solo_enc-motion_last_state
- solo_enc-frames_since_last_motion++ 5)
- send_event = true;
- else if (enc_buf-motion) {
- solo_enc-frames_since_last_motion = 0;
- send_event = !solo_enc-motion_last_state;
- }
- }
-
- if (send_event) {
+ if (solo_is_motion_on(solo_enc) enc_buf-motion) {
struct v4l2_event ev = {
.type = V4L2_EVENT_MOTION_DET,
.u.motion_det = {
@@ -594,8 +568,6 @@ static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
},
};
- solo_enc-motion_last_state = enc_buf-motion;
- solo_enc-frames_since_last_motion = 0;
v4l2_event_queue(solo_enc-vfd, ev);
}
}
diff --git a/drivers/media/pci/solo6x10/solo6x10.h
b/drivers/media/pci/solo6x10/solo6x10.h
index 72017b7..dc503fd 100644
--- a/drivers/media/pci/solo6x10/solo6x10.h
+++ b/drivers/media/pci/solo6x10/solo6x10.h
@@ -159,8 +159,6 @@ struct solo_enc_dev {
u16 motion_thresh;
boolmotion_global;
boolmotion_enabled;
- boolmotion_last_state;
- u8 frames_since_last_motion;
u16 width;
u16 height;
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
On Fri, Dec 12, 2014 at 3:30 PM, Hans Verkuil hverk...@xs4all.nl wrote: Acked-by: Hans Verkuil hans.verk...@cisco.com I have tested this and it looks good. I am not sure what problems I had originally that caused me to write that code, since it is now functioning as expected. So you can expect this patch to be part of the next 3.20 pull request I'll post. Sorry for the delay. Thanks. -- Bluecherry developer. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
On Fri, Nov 14, 2014 at 1:10 PM, Hans Verkuil hverk...@xs4all.nl wrote:
Hi Andrew,
FYI: I need to test this myself and understand it better, so it will take some
time before I get to this. It is in my TODO list, so it won't be forgotten.
Regards,
Hans
On 11/05/2014 09:11 PM, Andrey Utkin wrote:
Dropping code (introduced in 316d9e84a72069e04e483de0d5934c1d75f6a44c)
which intends to make raising of motion events more smooth(?).
It made motion event never appear in my installation.
That code is complicated, so I couldn't figure out quickly how to fix
it, so dropping it seems better to me.
Another justification is that anyway application would implement
motion signal stabilization if required, it is not necessarily kernel
driver's job.
Signed-off-by: Andrey Utkin andrey.ut...@corp.bluecherry.net
---
drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 30
+-
drivers/media/pci/solo6x10/solo6x10.h | 2 --
2 files changed, 1 insertion(+), 31 deletions(-)
diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
index 30e09d9..866f7b3 100644
--- a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
+++ b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
@@ -239,8 +239,6 @@ static int solo_enc_on(struct solo_enc_dev *solo_enc)
if (solo_enc-bw_weight solo_dev-enc_bw_remain)
return -EBUSY;
solo_enc-sequence = 0;
- solo_enc-motion_last_state = false;
- solo_enc-frames_since_last_motion = 0;
solo_dev-enc_bw_remain -= solo_enc-bw_weight;
if (solo_enc-type == SOLO_ENC_TYPE_EXT)
@@ -555,36 +553,12 @@ static int solo_enc_fillbuf(struct solo_enc_dev
*solo_enc,
}
if (!ret) {
- bool send_event = false;
-
vb-v4l2_buf.sequence = solo_enc-sequence++;
vb-v4l2_buf.timestamp.tv_sec = vop_sec(vh);
vb-v4l2_buf.timestamp.tv_usec = vop_usec(vh);
/* Check for motion flags */
- if (solo_is_motion_on(solo_enc)) {
- /* It takes a few frames for the hardware to detect
- * motion. Once it does it clears the motion detection
- * register and it takes again a few frames before
- * motion is seen. This means in practice that when the
- * motion field is 1, it will go back to 0 for the next
- * frame. This leads to motion detection event being
- * sent all the time, which is not what we want.
- * Instead wait a few frames before deciding that the
- * motion has halted. After some experimentation it
- * turns out that waiting for 5 frames works well.
- */
- if (enc_buf-motion == 0
- solo_enc-motion_last_state
- solo_enc-frames_since_last_motion++ 5)
- send_event = true;
- else if (enc_buf-motion) {
- solo_enc-frames_since_last_motion = 0;
- send_event = !solo_enc-motion_last_state;
- }
- }
-
- if (send_event) {
+ if (solo_is_motion_on(solo_enc) enc_buf-motion) {
struct v4l2_event ev = {
.type = V4L2_EVENT_MOTION_DET,
.u.motion_det = {
@@ -594,8 +568,6 @@ static int solo_enc_fillbuf(struct solo_enc_dev
*solo_enc,
},
};
- solo_enc-motion_last_state = enc_buf-motion;
- solo_enc-frames_since_last_motion = 0;
v4l2_event_queue(solo_enc-vfd, ev);
}
}
diff --git a/drivers/media/pci/solo6x10/solo6x10.h
b/drivers/media/pci/solo6x10/solo6x10.h
index 72017b7..dc503fd 100644
--- a/drivers/media/pci/solo6x10/solo6x10.h
+++ b/drivers/media/pci/solo6x10/solo6x10.h
@@ -159,8 +159,6 @@ struct solo_enc_dev {
u16 motion_thresh;
boolmotion_global;
boolmotion_enabled;
- boolmotion_last_state;
- u8 frames_since_last_motion;
u16 width;
u16 height;
Hi Hans, how is it proceeding with the subject of this patch?
--
Bluecherry developer.
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
On 12/11/2014 05:08 PM, Andrey Utkin wrote: On Fri, Nov 14, 2014 at 1:10 PM, Hans Verkuil hverk...@xs4all.nl wrote: Hi Andrew, FYI: I need to test this myself and understand it better, so it will take some time before I get to this. It is in my TODO list, so it won't be forgotten. Regards, Hans On 11/05/2014 09:11 PM, Andrey Utkin wrote: Dropping code (introduced in 316d9e84a72069e04e483de0d5934c1d75f6a44c) which intends to make raising of motion events more smooth(?). It made motion event never appear in my installation. That code is complicated, so I couldn't figure out quickly how to fix it, so dropping it seems better to me. Another justification is that anyway application would implement motion signal stabilization if required, it is not necessarily kernel driver's job. Signed-off-by: Andrey Utkin andrey.ut...@corp.bluecherry.net --- drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 30 +- drivers/media/pci/solo6x10/solo6x10.h | 2 -- 2 files changed, 1 insertion(+), 31 deletions(-) snip Hi Hans, how is it proceeding with the subject of this patch? Still haven't had the time to check this, other than a very quick test run. Don't worry, it's in my TODO list, so I can't forget, but it has been busier than usual lately. And this is one patch I really like to test before committing. Fingers crossed that I might be able to do it either tomorrow or on Monday. If that fails, then the next opportunity will be after Christmas as I won't have access to the hardware for awhile. Regards, Hans -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
Hi Andrew,
FYI: I need to test this myself and understand it better, so it will take some
time before I get to this. It is in my TODO list, so it won't be forgotten.
Regards,
Hans
On 11/05/2014 09:11 PM, Andrey Utkin wrote:
Dropping code (introduced in 316d9e84a72069e04e483de0d5934c1d75f6a44c)
which intends to make raising of motion events more smooth(?).
It made motion event never appear in my installation.
That code is complicated, so I couldn't figure out quickly how to fix
it, so dropping it seems better to me.
Another justification is that anyway application would implement
motion signal stabilization if required, it is not necessarily kernel
driver's job.
Signed-off-by: Andrey Utkin andrey.ut...@corp.bluecherry.net
---
drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 30
+-
drivers/media/pci/solo6x10/solo6x10.h | 2 --
2 files changed, 1 insertion(+), 31 deletions(-)
diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
index 30e09d9..866f7b3 100644
--- a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
+++ b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
@@ -239,8 +239,6 @@ static int solo_enc_on(struct solo_enc_dev *solo_enc)
if (solo_enc-bw_weight solo_dev-enc_bw_remain)
return -EBUSY;
solo_enc-sequence = 0;
- solo_enc-motion_last_state = false;
- solo_enc-frames_since_last_motion = 0;
solo_dev-enc_bw_remain -= solo_enc-bw_weight;
if (solo_enc-type == SOLO_ENC_TYPE_EXT)
@@ -555,36 +553,12 @@ static int solo_enc_fillbuf(struct solo_enc_dev
*solo_enc,
}
if (!ret) {
- bool send_event = false;
-
vb-v4l2_buf.sequence = solo_enc-sequence++;
vb-v4l2_buf.timestamp.tv_sec = vop_sec(vh);
vb-v4l2_buf.timestamp.tv_usec = vop_usec(vh);
/* Check for motion flags */
- if (solo_is_motion_on(solo_enc)) {
- /* It takes a few frames for the hardware to detect
- * motion. Once it does it clears the motion detection
- * register and it takes again a few frames before
- * motion is seen. This means in practice that when the
- * motion field is 1, it will go back to 0 for the next
- * frame. This leads to motion detection event being
- * sent all the time, which is not what we want.
- * Instead wait a few frames before deciding that the
- * motion has halted. After some experimentation it
- * turns out that waiting for 5 frames works well.
- */
- if (enc_buf-motion == 0
- solo_enc-motion_last_state
- solo_enc-frames_since_last_motion++ 5)
- send_event = true;
- else if (enc_buf-motion) {
- solo_enc-frames_since_last_motion = 0;
- send_event = !solo_enc-motion_last_state;
- }
- }
-
- if (send_event) {
+ if (solo_is_motion_on(solo_enc) enc_buf-motion) {
struct v4l2_event ev = {
.type = V4L2_EVENT_MOTION_DET,
.u.motion_det = {
@@ -594,8 +568,6 @@ static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
},
};
- solo_enc-motion_last_state = enc_buf-motion;
- solo_enc-frames_since_last_motion = 0;
v4l2_event_queue(solo_enc-vfd, ev);
}
}
diff --git a/drivers/media/pci/solo6x10/solo6x10.h
b/drivers/media/pci/solo6x10/solo6x10.h
index 72017b7..dc503fd 100644
--- a/drivers/media/pci/solo6x10/solo6x10.h
+++ b/drivers/media/pci/solo6x10/solo6x10.h
@@ -159,8 +159,6 @@ struct solo_enc_dev {
u16 motion_thresh;
boolmotion_global;
boolmotion_enabled;
- boolmotion_last_state;
- u8 frames_since_last_motion;
u16 width;
u16 height;
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] solo6x10: just pass frame motion flag from hardware, drop additional handling as complicated and unstable
Dropping code (introduced in 316d9e84a72069e04e483de0d5934c1d75f6a44c)
which intends to make raising of motion events more smooth(?).
It made motion event never appear in my installation.
That code is complicated, so I couldn't figure out quickly how to fix
it, so dropping it seems better to me.
Another justification is that anyway application would implement
motion signal stabilization if required, it is not necessarily kernel
driver's job.
Signed-off-by: Andrey Utkin andrey.ut...@corp.bluecherry.net
---
drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c | 30 +-
drivers/media/pci/solo6x10/solo6x10.h | 2 --
2 files changed, 1 insertion(+), 31 deletions(-)
diff --git a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
index 30e09d9..866f7b3 100644
--- a/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
+++ b/drivers/media/pci/solo6x10/solo6x10-v4l2-enc.c
@@ -239,8 +239,6 @@ static int solo_enc_on(struct solo_enc_dev *solo_enc)
if (solo_enc-bw_weight solo_dev-enc_bw_remain)
return -EBUSY;
solo_enc-sequence = 0;
- solo_enc-motion_last_state = false;
- solo_enc-frames_since_last_motion = 0;
solo_dev-enc_bw_remain -= solo_enc-bw_weight;
if (solo_enc-type == SOLO_ENC_TYPE_EXT)
@@ -555,36 +553,12 @@ static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
}
if (!ret) {
- bool send_event = false;
-
vb-v4l2_buf.sequence = solo_enc-sequence++;
vb-v4l2_buf.timestamp.tv_sec = vop_sec(vh);
vb-v4l2_buf.timestamp.tv_usec = vop_usec(vh);
/* Check for motion flags */
- if (solo_is_motion_on(solo_enc)) {
- /* It takes a few frames for the hardware to detect
-* motion. Once it does it clears the motion detection
-* register and it takes again a few frames before
-* motion is seen. This means in practice that when the
-* motion field is 1, it will go back to 0 for the next
-* frame. This leads to motion detection event being
-* sent all the time, which is not what we want.
-* Instead wait a few frames before deciding that the
-* motion has halted. After some experimentation it
-* turns out that waiting for 5 frames works well.
-*/
- if (enc_buf-motion == 0
- solo_enc-motion_last_state
- solo_enc-frames_since_last_motion++ 5)
- send_event = true;
- else if (enc_buf-motion) {
- solo_enc-frames_since_last_motion = 0;
- send_event = !solo_enc-motion_last_state;
- }
- }
-
- if (send_event) {
+ if (solo_is_motion_on(solo_enc) enc_buf-motion) {
struct v4l2_event ev = {
.type = V4L2_EVENT_MOTION_DET,
.u.motion_det = {
@@ -594,8 +568,6 @@ static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
},
};
- solo_enc-motion_last_state = enc_buf-motion;
- solo_enc-frames_since_last_motion = 0;
v4l2_event_queue(solo_enc-vfd, ev);
}
}
diff --git a/drivers/media/pci/solo6x10/solo6x10.h
b/drivers/media/pci/solo6x10/solo6x10.h
index 72017b7..dc503fd 100644
--- a/drivers/media/pci/solo6x10/solo6x10.h
+++ b/drivers/media/pci/solo6x10/solo6x10.h
@@ -159,8 +159,6 @@ struct solo_enc_dev {
u16 motion_thresh;
boolmotion_global;
boolmotion_enabled;
- boolmotion_last_state;
- u8 frames_since_last_motion;
u16 width;
u16 height;
--
1.8.5.5
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
