Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
drivers/media/rc/ati_remote.c | 3 +--
drivers/media/rc/ene_ir.c | 3 +--
drivers/media/rc/imon.c | 43 ++++++++++++++----------------------------
drivers/media/rc/ite-cir.c | 9 +++------
drivers/media/rc/mceusb.c | 4 +---
drivers/media/rc/rc-main.c | 3 +--
drivers/media/rc/redrat3.c | 18 ++++++------------
drivers/media/rc/streamzap.c | 9 +++------
drivers/media/rc/winbond-cir.c | 9 +++------
9 files changed, 33 insertions(+), 68 deletions(-)
diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c
index 9f5b59706741..0884b7dc0e71 100644
--- a/drivers/media/rc/ati_remote.c
+++ b/drivers/media/rc/ati_remote.c
@@ -527,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb)
remote_num = (data[3] >> 4) & 0x0f;
if (channel_mask & (1 << (remote_num + 1))) {
dbginfo(&ati_remote->interface->dev,
- "Masked input from channel 0x%02x: data %02x, "
- "mask= 0x%02lx\n",
+ "Masked input from channel 0x%02x: data %02x, mask=
0x%02lx\n",
remote_num, data[2], channel_mask);
return;
}
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index d1c61cd035f6..bd5512e64aea 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -1210,8 +1210,7 @@ MODULE_PARM_DESC(txsim,
MODULE_DEVICE_TABLE(pnp, ene_ids);
MODULE_DESCRIPTION
- ("Infrared input driver for KB3926B/C/D/E/F "
- "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
+ ("Infrared input driver for KB3926B/C/D/E/F (aka
ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
MODULE_AUTHOR("Maxim Levitsky");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index d62b1f38292c..bff834f5e018 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -441,13 +441,11 @@ MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes
(default: no)");
/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
static int display_type;
module_param(display_type, int, S_IRUGO);
-MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
- "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
+MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, 1=vfd,
2=lcd, 3=vga, 4=none (default: autodetect)");
static int pad_stabilize = 1;
module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
- "presses in arrow key mode. 0=disable, 1=enable (default).");
+MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD
presses in arrow key mode. 0=disable, 1=enable (default).");
/*
* In certain use cases, mouse mode isn't really helpful, and could actually
@@ -455,14 +453,12 @@ MODULE_PARM_DESC(pad_stabilize, "Apply stabilization
algorithm to iMON PAD "
*/
static bool nomouse;
module_param(nomouse, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
- "open. 0=don't disable, 1=disable. (default: don't disable)");
+MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is
open. 0=don't disable, 1=disable. (default: don't disable)");
/* threshold at which a pad push registers as an arrow key in kbd mode */
static int pad_thresh;
module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
- "arrow key in kbd mode (default: 28)");
+MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an
arrow key in kbd mode (default: 28)");
static void free_imon_context(struct imon_context *ictx)
@@ -785,9 +781,7 @@ static ssize_t show_associate_remote(struct device *d,
else
strcpy(buf, "closed\n");
- dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
- "instructions on how to associate your iMON 2.4G DT/LT "
- "remote\n");
+ dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for
instructions on how to associate your iMON 2.4G DT/LT remote\n");
mutex_unlock(&ictx->lock);
return strlen(buf);
}
@@ -1115,8 +1109,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64
*rc_type)
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
if (*rc_type && !(*rc_type & rc->allowed_protocols))
- dev_warn(dev, "Looks like you're trying to use an IR protocol "
- "this device does not support\n");
+ dev_warn(dev, "Looks like you're trying to use an IR protocol
this device does not support\n");
if (*rc_type & RC_BIT_RC6_MCE) {
dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
@@ -1129,8 +1122,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64
*rc_type)
/* ir_proto_packet[0] = 0x00; // already the default */
*rc_type = RC_BIT_OTHER;
} else {
- dev_warn(dev, "Unsupported IR protocol specified, overriding "
- "to iMON IR protocol\n");
+ dev_warn(dev, "Unsupported IR protocol specified, overriding to
iMON IR protocol\n");
if (!pad_stabilize)
dev_dbg(dev, "PAD stabilize functionality disabled\n");
/* ir_proto_packet[0] = 0x00; // already the default */
@@ -1719,8 +1711,7 @@ static void imon_incoming_packet(struct imon_context
*ictx,
not_input_data:
if (len != 8) {
- dev_warn(dev, "imon %s: invalid incoming packet "
- "size (len = %d, intf%d)\n", __func__, len, intf);
+ dev_warn(dev, "imon %s: invalid incoming packet size (len = %d,
intf%d)\n", __func__, len, intf);
return;
}
@@ -1876,8 +1867,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
allowed_protos = RC_BIT_RC6_MCE;
break;
default:
- dev_info(ictx->dev, "Unknown 0xffdc device, "
- "defaulting to VFD and iMON IR");
+ dev_info(ictx->dev, "Unknown 0xffdc device, defaulting to VFD
and iMON IR");
detected_display_type = IMON_DISPLAY_TYPE_VFD;
/* We don't know which one it is, allow user to set the
* RC6 one from userspace if OTHER wasn't correct. */
@@ -1934,8 +1924,7 @@ static void imon_set_display_type(struct imon_context
*ictx)
ictx->display_supported = false;
else
ictx->display_supported = true;
- dev_info(ictx->dev, "%s: overriding display type to %d via "
- "modparam\n", __func__, display_type);
+ dev_info(ictx->dev, "%s: overriding display type to %d via
modparam\n", __func__, display_type);
}
ictx->display_type = configured_display_type;
@@ -2156,8 +2145,7 @@ static bool imon_find_endpoints(struct imon_context *ictx,
if (!display_ep_found) {
tx_control = true;
display_ep_found = true;
- dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
- "interface OUT endpoint\n", __func__);
+ dev_dbg(ictx->dev, "%s: device uses control endpoint, not
interface OUT endpoint\n", __func__);
}
/*
@@ -2366,8 +2354,7 @@ static void imon_init_display(struct imon_context *ictx,
/* set up sysfs entry for built-in clock */
ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
if (ret)
- dev_err(ictx->dev, "Could not create display sysfs "
- "entries(%d)", ret);
+ dev_err(ictx->dev, "Could not create display sysfs
entries(%d)", ret);
if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
ret = usb_register_dev(intf, &imon_lcd_class);
@@ -2375,8 +2362,7 @@ static void imon_init_display(struct imon_context *ictx,
ret = usb_register_dev(intf, &imon_vfd_class);
if (ret)
/* Not a fatal error, so ignore */
- dev_info(ictx->dev, "could not get a minor number for "
- "display\n");
+ dev_info(ictx->dev, "could not get a minor number for
display\n");
}
@@ -2456,8 +2442,7 @@ static int imon_probe(struct usb_interface *interface,
mutex_unlock(&ictx->lock);
}
- dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
- "usb<%d:%d> initialized\n", vendor, product, ifnum,
+ dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d>
initialized\n", vendor, product, ifnum,
usbdev->bus->busnum, usbdev->devnum);
mutex_unlock(&driver_lock);
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index 0f301903aa6f..c5e8e3885766 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -55,14 +55,12 @@ MODULE_PARM_DESC(debug, "Enable debugging output");
/* low limit for RX carrier freq, Hz, 0 for no RX demodulation */
static int rx_low_carrier_freq;
module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, "
- "0 for no RX demodulation");
+MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz,
0 for no RX demodulation");
/* high limit for RX carrier freq, Hz, 0 for no RX demodulation */
static int rx_high_carrier_freq;
module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, "
- "Hz, 0 for no RX demodulation");
+MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency,
Hz, 0 for no RX demodulation");
/* override tx carrier frequency */
static int tx_carrier_freq;
@@ -1484,8 +1482,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct
pnp_device_id
if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) {
model_no = model_number;
- ite_pr(KERN_NOTICE, "The model has been fixed by a module "
- "parameter.");
+ ite_pr(KERN_NOTICE, "The model has been fixed by a module
parameter.");
}
ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model);
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index 4f8c7effdcee..f813b77c595d 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -604,9 +604,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir,
char *buf,
break;
case MCE_RSP_EQWAKEVERSION:
if (!out)
- dev_dbg(dev, "Wake version, proto: 0x%02x, "
- "payload: 0x%02x, address: 0x%02x, "
- "version: 0x%02x",
+ dev_dbg(dev, "Wake version, proto: 0x%02x,
payload: 0x%02x, address: 0x%02x, version: 0x%02x",
data1, data2, data3, data4);
break;
case MCE_RSP_GETPORTSTATUS:
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d9c1f2ff7119..b241e5f569ef 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -660,8 +660,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_type
protocol,
dev->last_toggle = toggle;
dev->last_keycode = keycode;
- IR_dprintk(1, "%s: key down event, "
- "key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
+ IR_dprintk(1, "%s: key down event, key 0x%04x, protocol 0x%04x,
scancode 0x%08x\n",
dev->input_name, keycode, protocol, scancode);
input_report_key(dev->input_dev, keycode, 1);
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 05ba47bc0b61..3b0ed1c3f2d8 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -265,8 +265,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3,
int code)
/* Codes 0x20 through 0x2f are IR Firmware Errors */
case 0x20:
- pr_cont("Initial signal pulse not long enough "
- "to measure carrier frequency\n");
+ pr_cont("Initial signal pulse not long enough to measure
carrier frequency\n");
break;
case 0x21:
pr_cont("Not enough length values allocated for signal\n");
@@ -278,18 +277,15 @@ static void redrat3_dump_fw_error(struct redrat3_dev
*rr3, int code)
pr_cont("Too many signal repeats\n");
break;
case 0x28:
- pr_cont("Insufficient memory available for IR signal "
- "data memory allocation\n");
+ pr_cont("Insufficient memory available for IR signal data
memory allocation\n");
break;
case 0x29:
- pr_cont("Insufficient memory available "
- "for IrDa signal data memory allocation\n");
+ pr_cont("Insufficient memory available for IrDa signal data
memory allocation\n");
break;
/* Codes 0x30 through 0x3f are USB Firmware Errors */
case 0x30:
- pr_cont("Insufficient memory available for bulk "
- "transfer structure\n");
+ pr_cont("Insufficient memory available for bulk transfer
structure\n");
break;
/*
@@ -301,8 +297,7 @@ static void redrat3_dump_fw_error(struct redrat3_dev *rr3,
int code)
pr_cont("Signal capture has been terminated\n");
break;
case 0x41:
- pr_cont("Attempt to set/get and unknown signal I/O "
- "algorithm parameter\n");
+ pr_cont("Attempt to set/get and unknown signal I/O algorithm
parameter\n");
break;
case 0x42:
pr_cont("Signal capture already started\n");
@@ -917,8 +912,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct
redrat3_dev *rr3)
goto out;
}
- snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s "
- "Infrared Remote Transceiver (%04x:%04x)",
+ snprintf(rr3->name, sizeof(rr3->name), "RedRat3%s Infrared Remote
Transceiver (%04x:%04x)",
prod == USB_RR3IIUSB_PRODUCT_ID ? "-II" : "",
le16_to_cpu(rr3->udev->descriptor.idVendor), prod);
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 4004260a7c69..d61a620b6fd5 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -297,8 +297,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct
streamzap_ir *sz)
goto out;
}
- snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
- "Receiver (%04x:%04x)",
+ snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared
Receiver (%04x:%04x)",
le16_to_cpu(sz->usbdev->descriptor.idVendor),
le16_to_cpu(sz->usbdev->descriptor.idProduct));
usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
@@ -364,15 +363,13 @@ static int streamzap_probe(struct usb_interface *intf,
sz->endpoint = &(iface_host->endpoint[0].desc);
if (!usb_endpoint_dir_in(sz->endpoint)) {
- dev_err(&intf->dev, "%s: endpoint doesn't match input device "
- "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+ dev_err(&intf->dev, "%s: endpoint doesn't match input device
02%02x\n", __func__, sz->endpoint->bEndpointAddress);
retval = -ENODEV;
goto free_sz;
}
if (!usb_endpoint_xfer_int(sz->endpoint)) {
- dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
- "02%02x\n", __func__, sz->endpoint->bmAttributes);
+ dev_err(&intf->dev, "%s: endpoint attributes don't match xfer
02%02x\n", __func__, sz->endpoint->bmAttributes);
retval = -ENODEV;
goto free_sz;
}
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 95ae60e659a1..cdcd6e38b295 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -227,8 +227,7 @@ struct wbcir_data {
static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
- "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
+MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command (0 =
RC5, 1 = NEC, 2 = RC6A, default)");
static bool invert; /* default = 0 */
module_param(invert, bool, 0444);
@@ -244,8 +243,7 @@ MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR
command");
static unsigned int wake_rc6mode = 6;
module_param(wake_rc6mode, uint, 0644);
-MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
- "(0 = 0, 6 = 6A, default)");
+MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command (0 = 0, 6 =
6A, default)");
@@ -1050,8 +1048,7 @@ wbcir_probe(struct pnp_dev *device, const struct
pnp_device_id *dev_id)
goto exit_free_data;
}
- dev_dbg(&device->dev, "Found device "
- "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
+ dev_dbg(&device->dev, "Found device (w: 0x%lX, e: 0x%lX, s: 0x%lX, i:
%u)\n",
data->wbase, data->ebase, data->sbase, data->irq);
data->led.name = "cir::activity";
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
