Hello.
On 01/29/2015 07:19 PM, William Towle wrote:
No signed off? Although, looking at the patch, I'm not very surprised...
---
arch/arm/boot/dts/r8a7790-lager.dts | 51 +++
1 file changed, 34 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
b/arch/arm/boot/dts/r8a7790-lager.dts
index be44493..c20b6cb 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -249,9 +249,9 @@
renesas,function = usb2;
};
- vin1_pins: vin {
- renesas,groups = vin1_data8, vin1_clk;
- renesas,function = vin1;
I'm not sure why are you removing the VIN1 pins while adding VIN0 pins.
+ vin0_pins: vin0 {
+ renesas,groups = vin0_data24, vin0_sync, vin0_field, vin0_clkenb,
vin0_clk;
+ renesas,function = vin0;
};
};
@@ -391,15 +391,15 @@
pinctrl-0 = iic2_pins;
pinctrl-names = default;
- composite-in@20 {
- compatible = adi,adv7180;
- reg = 0x20;
- remote = vin1;
Why remove it?
+ adv7612: adv7612@0x4c {
We don't call the nodes with chip names. According to the ePAPR standard
section 2.2.2, node names should reflect the general function of the device.
And drop 0x prefix from unit-address prt of the name please.
+ compatible = adi,adv7612;
+ reg = 0x4c;
+ remote = vin0;
port {
- adv7180: endpoint {
- bus-width = 8;
- remote-endpoint = vin1ep0;
+ adv7612_1: endpoint {
+ remote-endpoint = vin0ep0;
+ default-input = 0;
};
};
};
@@ -419,6 +419,19 @@
i2c-gpio,delay-us = 1; /* ~100 kHz */
#address-cells = 1;
#size-cells = 0;
+
+ adv7612: adv7612@0x4c {
Two identical labels? Do we really have 2 ADV7162 chips on the board?
And the same comments on the node name...
+ compatible = adi,adv7612;
+ reg = 0x4c;
+ remote = vin0;
+
+ port {
+ adv7612_1: endpoint {
Two identical labels?
+ remote-endpoint = vin0ep0;
+ default-input = 0;
+ };
+ };
+ };
};
};
#endif
@@ -457,9 +470,9 @@
pinctrl-names = default;
};
-/* composite video input */
-vin1 {
- pinctrl-0 = vin1_pins;
Why remove it?
+/* HDMI video input */
+vin0 {
+ pinctrl-0 = vin0_pins;
pinctrl-names = default;
status = ok;
@@ -468,9 +481,13 @@
#address-cells = 1;
#size-cells = 0;
- vin1ep0: endpoint {
- remote-endpoint = adv7180;
- bus-width = 8;
+ vin0ep0: endpoint {
+ remote-endpoint = adv7612_1;
+ bus-width = 24;
+ hsync-active = 0;
+ vsync-active = 0;
+ pclk-sample = 1;
+ data-active = 1;
};
};
[...]
WBR, Sergei
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html