Re: [PATCH v10 11/12] V4L: Add DT binding doc for s5k4e5 image sensor
On Fri, Oct 18, 2013 at 06:37:38AM +0100, Arun Kumar K wrote: S5K4E5 is a Samsung raw image sensor controlled via I2C. This patch adds the DT binding documentation for the same. Signed-off-by: Arun Kumar K arun...@samsung.com Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com --- .../devicetree/bindings/media/samsung-s5k4e5.txt | 45 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k4e5.txt diff --git a/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt b/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt new file mode 100644 index 000..0fca087 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt @@ -0,0 +1,45 @@ +* Samsung S5K4E5 Raw Image Sensor + +S5K4E5 is a raw image sensor with maximum resolution of 2560x1920 +pixels. Data transfer is carried out via MIPI CSI-2 port and controls +via I2C bus. + +Required Properties: +- compatible : must be samsung,s5k4e5 s/must be/should contain/ +- reg: I2C device address +- reset-gpios: specifier of a GPIO connected to the RESET pin +- clocks : should contain the sensor's EXTCLK clock specifier, from + the common clock bindings I would reword this to reference clock-names so as to make the ordering relationship explicit. With that, as everything else looks sane: Acked-by: Mark Rutland mark.rutl...@arm.com Thanks Mark. -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v10 11/12] V4L: Add DT binding doc for s5k4e5 image sensor
S5K4E5 is a Samsung raw image sensor controlled via I2C. This patch adds the DT binding documentation for the same. Signed-off-by: Arun Kumar K arun...@samsung.com Reviewed-by: Sylwester Nawrocki s.nawro...@samsung.com --- .../devicetree/bindings/media/samsung-s5k4e5.txt | 45 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k4e5.txt diff --git a/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt b/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt new file mode 100644 index 000..0fca087 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung-s5k4e5.txt @@ -0,0 +1,45 @@ +* Samsung S5K4E5 Raw Image Sensor + +S5K4E5 is a raw image sensor with maximum resolution of 2560x1920 +pixels. Data transfer is carried out via MIPI CSI-2 port and controls +via I2C bus. + +Required Properties: +- compatible : must be samsung,s5k4e5 +- reg : I2C device address +- reset-gpios : specifier of a GPIO connected to the RESET pin +- clocks : should contain the sensor's EXTCLK clock specifier, from + the common clock bindings +- clock-names : should contain extclk entry +- svdda-supply : core voltage supply +- svddio-supply: I/O voltage supply + +Optional Properties: +- clock-frequency : the frequency at which the extclk clock should be + configured to operate, in Hz; if this property is not + specified default 24 MHz value will be used + +The device node should be added to respective control bus controller +(e.g. I2C0) nodes and linked to the csis port node, using the common +video interfaces bindings, defined in video-interfaces.txt. + +Example: + + i2c-isp@1313 { + s5k4e5@20 { + compatible = samsung,s5k4e5; + reg = 0x20; + reset-gpios = gpx1 2 1; + clock-frequency = 2400; + clocks = clock 129; + clock-names = extclk + svdda-supply = ...; + svddio-supply = ...; + port { + is_s5k4e5_ep: endpoint { + data-lanes = 1 2 3 4; + remote-endpoint = csis0_ep; + }; + }; + }; + }; -- 1.7.9.5 -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html