[PATCH v3 4/6] dt-bindings: media: mt9m111: adapt documentation to be more clear

[Marco Felsch]

Replace the vague binding by a more verbose. Remove the remote property
from the example since the driver don't support such a property. Also
remove the bus-width property from the endpoint since the driver don't
take care of it.

Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
Reviewed-by: Rob Herring <r...@kernel.org>

---
Changelog:

v3:
- drop remote-endpoint docu, since it is documented by
  video-interfaces.txt.

v2:
- initial commit

 Documentation/devicetree/bindings/media/i2c/mt9m111.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt 
b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
index 6b910036b57e..a431fb45704b 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
@@ -9,8 +9,10 @@ Required Properties:
 - clocks: reference to the master clock.
 - clock-names: shall be "mclk".
 
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
 
@@ -21,10 +23,8 @@ Example:
                        clocks = <&mclk>;
                        clock-names = "mclk";
 
-                       remote = <&pxa_camera>;
                        port {
                                mt9m111_1: endpoint {
-                                       bus-width = <8>;
                                        remote-endpoint = <&pxa_camera>;
                                };
                        };
-- 
2.19.1