Re: [RFC v2 01/10] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
Hi Arun, On 07/09/2013 01:08 PM, Arun Kumar K wrote: On Fri, Jun 21, 2013 at 4:15 AM, Sylwester Nawrocki sylvester.nawro...@gmail.com wrote: On 05/31/2013 03:03 PM, Arun Kumar K wrote: [...] Signed-off-by: Arun Kumar Karun...@samsung.com --- .../devicetree/bindings/media/exynos5-fimc-is.txt | 41 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 000..9fd4646 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,41 @@ [...] +--- + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node + + +Required properties: + +- compatible: must be samsung,exynos5250-fimc-is +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : Parent interrupt controller +- interrupts: fimc-is interrupt to the parent combiner +- clocks: list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain isp, mcu_isp, isp_div0, isp_div1, + isp_divmpwm, mcu_isp_div0, mcu_isp_div1 entries, + matching entries in the clocks property. + + +Board specific properties: + +- pinctrl-names: pinctrl names for camera port pinmux control, at least +default needs to be specified. +- pinctrl-0...N : pinctrl properties corresponding to pinctrl-names What pins exactly are supposed to be covered by these properties ? For what devices ? Aren't the camera port pins supposed to be specified at the common 'camera' node ? I believe the camera ports are not specific to the FIMC-IS. These are for the sensor controls (especially clock lines). I think I should move these to the sensor node. This doesn't sound right either. These pins are not a property of an external image sensor device, they are specific to the AP SoC. So IMO these pinctrl properties belong to some SoC's internal device node. I think we could add a clock provider for the sclk_cam clocks and then the pinmux of those clock outputs could be configurable from with the clock ops. E.g. we set the pinumx into CAM_?_CLKOUT function only when a clock is enabled. Disabling a clock would put CLKOUT pin pinmux e.g. into input with pull down state. This would ensure proper CLKOUT pin configuration when image sensor is suspended or entirely powered off. I'm working on something like this for exynos4. +pmu subnode +--- + +Required properties: + - reg : should contain PMU physical base address and size of the memory + mapped registers. What about other devices, like ISP I2C, SPI ? Don't you want to list at least the ones currently used (I2C bus controllers) ? The present driver doesnt make use of the SPI bus as its used only for sensor calibration which is not yet added. Is it only going to be used by the Cortex-A5 firmware, similarly to the I2C bus ? If so then it is likely not needed to specify it here right now. But I believe for complete H/W description we should reserve a possibility to add those various peripheral device nodes here. I2C bus is used by the sensor which has its own node. May be I should explain one of the sensor nodes over here? I would describe at least I2C bus controller node and add a note that image sensor nodes can be specified there. Also, it would be good to start adding separate sensor drivers for each sensor, like s5k6a3, s5k4e3, etc. Ideally we should not have duplicated fimc-is-sensor.[ch] that would handle various sensors, i.e. same set of sensors to drivers/media/platform/exynos4-is and drivers/media/platform/ exynos5-is. After you post the next iteration of this series I could have a look how it could be done. -- Thanks, Sylwester -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC v2 01/10] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
Hi Sylwester, On Wed, Jul 17, 2013 at 2:53 AM, Sylwester Nawrocki sylvester.nawro...@gmail.com wrote: Hi Arun, On 07/09/2013 01:08 PM, Arun Kumar K wrote: On Fri, Jun 21, 2013 at 4:15 AM, Sylwester Nawrocki sylvester.nawro...@gmail.com wrote: On 05/31/2013 03:03 PM, Arun Kumar K wrote: [...] Signed-off-by: Arun Kumar Karun...@samsung.com --- .../devicetree/bindings/media/exynos5-fimc-is.txt | 41 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 000..9fd4646 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,41 @@ [...] +--- + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node + + +Required properties: + +- compatible: must be samsung,exynos5250-fimc-is +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : Parent interrupt controller +- interrupts: fimc-is interrupt to the parent combiner +- clocks: list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain isp, mcu_isp, isp_div0, isp_div1, + isp_divmpwm, mcu_isp_div0, mcu_isp_div1 entries, + matching entries in the clocks property. + + +Board specific properties: + +- pinctrl-names: pinctrl names for camera port pinmux control, at least +default needs to be specified. +- pinctrl-0...N : pinctrl properties corresponding to pinctrl-names What pins exactly are supposed to be covered by these properties ? For what devices ? Aren't the camera port pins supposed to be specified at the common 'camera' node ? I believe the camera ports are not specific to the FIMC-IS. These are for the sensor controls (especially clock lines). I think I should move these to the sensor node. This doesn't sound right either. These pins are not a property of an external image sensor device, they are specific to the AP SoC. So IMO these pinctrl properties belong to some SoC's internal device node. Ok. Time being I will move it to the camera node pinctrl properties. I think we could add a clock provider for the sclk_cam clocks and then the pinmux of those clock outputs could be configurable from with the clock ops. E.g. we set the pinumx into CAM_?_CLKOUT function only when a clock is enabled. Disabling a clock would put CLKOUT pin pinmux e.g. into input with pull down state. This would ensure proper CLKOUT pin configuration when image sensor is suspended or entirely powered off. I'm working on something like this for exynos4. Ok that would be great. I will refer your exynos4 implementation for doing this. +pmu subnode +--- + +Required properties: + - reg : should contain PMU physical base address and size of the memory + mapped registers. What about other devices, like ISP I2C, SPI ? Don't you want to list at least the ones currently used (I2C bus controllers) ? The present driver doesnt make use of the SPI bus as its used only for sensor calibration which is not yet added. Is it only going to be used by the Cortex-A5 firmware, similarly to the I2C bus ? If so then it is likely not needed to specify it here right now. But I believe for complete H/W description we should reserve a possibility to add those various peripheral device nodes here. Yes its going to be used by the firmware and is done for sensor calibration. The sensor works well even without it and so I didnt include it in my initial patchset and kept it as a todo. I2C bus is used by the sensor which has its own node. May be I should explain one of the sensor nodes over here? I would describe at least I2C bus controller node and add a note that image sensor nodes can be specified there. I havent created a dummy i2c device driver for handling the i2c clock part and everything was handled in the fimc-is-sensor itself. I was checking your exynos4 implementation and will try to do in similar lines. Also, it would be good to start adding separate sensor drivers for each sensor, like s5k6a3, s5k4e3, etc. Ideally we should not have duplicated fimc-is-sensor.[ch] that would handle various
Re: [RFC v2 01/10] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
Hi Sylwester, Thank you for the review and sorry for the delayed response. On Fri, Jun 21, 2013 at 4:15 AM, Sylwester Nawrocki sylvester.nawro...@gmail.com wrote: Hi Arun, On 05/31/2013 03:03 PM, Arun Kumar K wrote: Please add at least one sentence here. All in all this patch adds DT binding documentation for a fairly complex subsystem. And please Cc devicetree-disc...@lists.ozlabs.org next time. Ok will do that. Signed-off-by: Arun Kumar Karun...@samsung.com --- .../devicetree/bindings/media/exynos5-fimc-is.txt | 41 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 000..9fd4646 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,41 @@ +Samsung EXYNOS SoC Camera Subsystem Shouldn't it be, e.g.: Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) Or do you intend this file to be describing also the other sub-devices, like GScaler ? Probably not. WIll change it to Imaging subsystem. +--- + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node + + +Required properties: + +- compatible: must be samsung,exynos5250-fimc-is +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : Parent interrupt controller +- interrupts: fimc-is interrupt to the parent combiner +- clocks: list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain isp, mcu_isp, isp_div0, isp_div1, + isp_divmpwm, mcu_isp_div0, mcu_isp_div1 entries, + matching entries in the clocks property. + + +Board specific properties: + +- pinctrl-names: pinctrl names for camera port pinmux control, at least +default needs to be specified. +- pinctrl-0...N : pinctrl properties corresponding to pinctrl-names What pins exactly are supposed to be covered by these properties ? For what devices ? Aren't the camera port pins supposed to be specified at the common 'camera' node ? I believe the camera ports are not specific to the FIMC-IS. These are for the sensor controls (especially clock lines). I think I should move these to the sensor node. +pmu subnode +--- + +Required properties: + - reg : should contain PMU physical base address and size of the memory + mapped registers. What about other devices, like ISP I2C, SPI ? Don't you want to list at least the ones currently used (I2C bus controllers) ? The present driver doesnt make use of the SPI bus as its used only for sensor calibration which is not yet added. I2C bus is used by the sensor which has its own node. May be I should explain one of the sensor nodes over here? Regards Arun -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [RFC v2 01/10] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
Hi Arun, On 05/31/2013 03:03 PM, Arun Kumar K wrote: Please add at least one sentence here. All in all this patch adds DT binding documentation for a fairly complex subsystem. And please Cc devicetree-disc...@lists.ozlabs.org next time. Signed-off-by: Arun Kumar Karun...@samsung.com --- .../devicetree/bindings/media/exynos5-fimc-is.txt | 41 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 000..9fd4646 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,41 @@ +Samsung EXYNOS SoC Camera Subsystem Shouldn't it be, e.g.: Samsung EXYNOS5 SoC series Imaging Subsystem (FIMC-IS) Or do you intend this file to be describing also the other sub-devices, like GScaler ? +--- + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node + + +Required properties: + +- compatible: must be samsung,exynos5250-fimc-is +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : Parent interrupt controller +- interrupts: fimc-is interrupt to the parent combiner +- clocks: list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain isp, mcu_isp, isp_div0, isp_div1, + isp_divmpwm, mcu_isp_div0, mcu_isp_div1 entries, + matching entries in the clocks property. + + +Board specific properties: + +- pinctrl-names: pinctrl names for camera port pinmux control, at least +default needs to be specified. +- pinctrl-0...N : pinctrl properties corresponding to pinctrl-names What pins exactly are supposed to be covered by these properties ? For what devices ? Aren't the camera port pins supposed to be specified at the common 'camera' node ? I believe the camera ports are not specific to the FIMC-IS. +pmu subnode +--- + +Required properties: + - reg : should contain PMU physical base address and size of the memory + mapped registers. What about other devices, like ISP I2C, SPI ? Don't you want to list at least the ones currently used (I2C bus controllers) ? Regards, Sylwester -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[RFC v2 01/10] exynos5-fimc-is: Add Exynos5 FIMC-IS device tree bindings documentation
Signed-off-by: Arun Kumar K arun...@samsung.com --- .../devicetree/bindings/media/exynos5-fimc-is.txt | 41 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/exynos5-fimc-is.txt diff --git a/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt new file mode 100644 index 000..9fd4646 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-fimc-is.txt @@ -0,0 +1,41 @@ +Samsung EXYNOS SoC Camera Subsystem +--- + +The camera subsystem on Samsung Exynos5 SoC has some changes relative +to previous SoC versions. Exynos5 has almost similar MIPI-CSIS and +FIMC-LITE IPs but has a much improved version of FIMC-IS which can +handle sensor controls and camera post-processing operations. The +Exynos5 FIMC-IS has a dedicated ARM Cortex A5 processor, many +post-processing blocks (ISP, DRC, FD, ODC, DIS, 3DNR) and two +dedicated scalers (SCC and SCP). + +fimc-is node + + +Required properties: + +- compatible: must be samsung,exynos5250-fimc-is +- reg : physical base address and size of the memory mapped + registers +- interrupt-parent : Parent interrupt controller +- interrupts: fimc-is interrupt to the parent combiner +- clocks: list of clock specifiers, corresponding to entries in + clock-names property; +- clock-names : must contain isp, mcu_isp, isp_div0, isp_div1, + isp_divmpwm, mcu_isp_div0, mcu_isp_div1 entries, + matching entries in the clocks property. + + +Board specific properties: + +- pinctrl-names: pinctrl names for camera port pinmux control, at least +default needs to be specified. +- pinctrl-0...N : pinctrl properties corresponding to pinctrl-names + +pmu subnode +--- + +Required properties: + - reg : should contain PMU physical base address and size of the memory + mapped registers. + -- 1.7.9.5 -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
