This card was working in Fedora 12 with the Atrpms V4l from a 201090401 snapshot. With Fedora 14 kernel 2.6.35.9-64.fc14.x86_64 the tuner does not find any ATSC channels. I two other cards that still work.
Relevant from dmesg: [ 0.000000] Command line: ro root=UUID=1a37f5f8-8794-4f5b-af11-5d9b67438bd8 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rdblacklist=nouveau vga=31B rdblacklist=cx8800 rdblacklist=cx8802 rdblacklist=cx88-alsa rdblacklist=cx88-dvb [ 0.000000] Kernel command line: ro root=UUID=1a37f5f8-8794-4f5b-af11-5d9b67438bd8 SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us rdblacklist=nouveau vga=31B rdblacklist=cx8800 rdblacklist=cx8802 rdblacklist=cx88-alsa rdblacklist=cx88-dvb [ 45.098855] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded [ 45.101130] cx88[0]: subsystem: 17de:08c1, board: Kworld PlusTV HD PCI 120 (ATSC 120) [card=67,autodetected], frontend(s): 1 [ 45.101972] cx88[0]: TV tuner type 71, Radio tuner type -1 [ 45.102825] cx88[0]: cx88_reset [ 45.214124] cx88[0]: i2c register ok [ 45.282964] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 45.283837] cx88[0]/2: cx2388x 8802 Driver Manager [ 45.284740] cx88-mpeg driver manager 0000:04:07.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 45.285646] cx88[0]/2: found at 0000:04:07.2, rev: 5, irq: 22, latency: 64, mmio: 0xfb000000 [ 45.294888] cx88/2: cx2388x dvb driver version 0.0.8 loaded [ 45.295784] cx88/2: registering cx8802 driver, type: dvb access: shared [ 45.296700] cx88[0]/2: subsystem: 17de:08c1, board: Kworld PlusTV HD PCI 120 (ATSC 120) [card=67] [ 45.296714] cx88[0]/2-dvb: cx8802_dvb_probe [ 45.296717] cx88[0]/2-dvb: ->being probed by Card=67 Name=cx88[0], PCI 04:07 [ 45.296719] cx88[0]/2: cx2388x based DVB/ATSC card [ 45.296720] cx8802_alloc_frontends() allocating 1 frontend(s) [ 45.392133] cx88[0]/2: xc3028 attached [ 45.394621] DVB: registering new adapter (cx88[0]) [ 106.834823] cx88[0]/2-dvb: cx8802_dvb_advise_acquire [ 106.834835] cx88[0]/2-mpeg: cx8802_request_acquire() Post acquire GPIO=ff <above two lines repeat many times> [ 182.752026] cx88[0]: Calling XC2028/3028 callback <above line repeats many times> [ 1164.358595] cx88[0]/2-dvb: cx8802_dvb_advise_release [ 1164.358599] cx88[0]/2-mpeg: cx8802_request_release() Post release GPIO=ff [ 2829.664271] cx88[0]/2-dvb: cx8802_dvb_advise_acquire [ 2829.664283] cx88[0]/2-mpeg: cx8802_request_acquire() Post acquire GPIO=ff <above four lines repeat many times> I generally followed http://linuxtv.org/wiki/index.php/KWorld_ATSC_120 and blacklisted the drivers and loaded cx88-dvb. You don't have to move the blacklist out of the way for Fedora and it seems that the right set of modules get loaded. From the wiki it calls for dvb-fe-xc5000-1.1.fw but that does not seem to be used for this card and a newer version is in Fedora 14. Firmware xc3028-v27.fw seems to be loaded. >From lsmod | grep cx88: cx88_dvb 23891 1 cx88_vp3054_i2c 2048 1 cx88_dvb cx8802 12810 1 cx88_dvb cx88xx 73785 2 cx88_dvb,cx8802 i2c_algo_bit 5205 2 cx88_vp3054_i2c,cx88xx btcx_risc 3738 2 cx8802,cx88xx videobuf_dvb 5242 2 cx88_dvb,saa7134_dvb dvb_core 89889 3 cx88_dvb,videobuf_dvb,pvrusb2 v4l2_common 16581 8 cx88xx,saa7134,wm8775,tuner,cx25840,hdpvr,pvrusb2,cx2341x videodev 41889 8 cx88xx,saa7134,wm8775,tuner,cx25840,hdpvr,pvrusb2,v4l2_common videobuf_dma_sg 9613 6 cx88_dvb,cx8802,cx88xx,saa7134_alsa,saa7134_dvb,saa7134 videobuf_core 15769 5 cx8802,cx88xx,videobuf_dvb,saa7134,videobuf_dma_sg ir_common 5132 2 cx88xx,saa7134 ir_core 16339 12 cx88xx,saa7134,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,rc_rc6_mce,ir_rc5_decoder,mceusb,ir_common,ir_nec_decoder tveeprom 13145 3 cx88xx,saa7134,pvrusb2 i2c_core 26900 22 tuner_xc2028,s5h1409,cx88_dvb,cx88_vp3054_i2c,cx88xx,i2c_algo_bit,nxt200x,saa7134_dvb,nvidia,tuner_simple,tda9887,tda8290,saa7134,wm8775,tuner,cx25840,hdpvr,pvrusb2,v4l2_common,videodev,i2c_piix4,tveeprom >From /etc/modprobe.d/local.conf: blacklist cx8800 blacklist cx8802 blacklist cx88-alsa blacklist cx88-dvb options cx88_dvb adapter_nr=2 debug=1 options cx88xx core_debug=1 disable_ir=1 i2c_debug=1 options cx8802 debug=1 Any suggestions are welcome. Mark -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
