Re: Sundtek Media Pro III Europe switching off
Am 01.02.2015 um 14:26 schrieb Markus Rechberger: You'd need to show us some logfiles. echo loglevel=min /etc/sundtek.conf (and reboot) or /opt/bin/mediaclient --loglevel=min (this will turn on the logfile immediately). Is the tuner attached to a USB 3.0 port? What does tvheadend say? The tuner and drivers are 100% stable and proven with tvheadend, so in case tvheadend is blocked something else must be wrong. Best Regards, Markus On Sun, Feb 1, 2015 at 11:12 AM, steigerungs faktor steigerungsfak...@web.de wrote: Hi. Sry for the delay, testet quite a bit during nights. And switched from TVHeadend to VDR. Better used to. Obviously I have a USB problem, allthough not using 3.0 Will contact Fedora and Sundtek. Thanks for the trouble Gunter If interested, here is the story: Yesterday, after boot, Sundtek Media Pro was on. Driver loaded. TV possible, Rec possible. (By the way, not KODI but XBMC Gotham is running on this Fedora 20.) Hardware is Gigabyte GA-870A-USB3 Mainboard, Dualcore 3,4 GHz AMD. 4GB RAM, NVIDIA 9500. NVIDIA driver in use. SSD (reboot is nice). Setting Timer (1) worked with live TV running; at programmed time, vdr switched channel and recorded. Interesting: I had live TV on Eurosport, Timer on Tele 5, and could record Tele5 with Eurosport continuing to show football Probably same transponder, and the tuner can split the signals ??? Anyways, Eurosport kept going after Timer end. Tuner had no chance for pausing (?). Next Timer (2): Some time later, DasErste. Eurosport live ended, DasErste was recorded. Next timer(3) : DasErsteHD, immediately following Timer 2. Was recorded correctly; obviously again Tuner had no chance for pausing (?). Yet after rec, live TV was off. Next Timer (4): hours later. Rec startet, but no data recorded. This morning no chance of getting xbmc to show tv. No data from backend. Reboot, device plugged in. mediasrv.log: 2015-02-06 09:06:10 [1050] restarting logging 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] read status failure 1041 2015-02-06 09:06:10 [1050] The device just got disconnected from the system 2015-02-06 09:06:10 [1050] Shutting down this device instance 2015-02-06 09:06:10 [1050] USB Transfer problem, shutting down driver instance (-1 - 19) 2015-02-06 09:06:10 [1050] Stopping Remote Control support 2015-02-06 09:06:10 [1050] Enabling Standby 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] Tuner response error (660) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] send vendor cmd failed with status --1 2015-02-06 09:06:10 [1050] send vendor cmd failed with status --1 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [4953] RC: detached remote control 2015-02-06 09:06:10 [1050] clearing id: 0 2015-02-06 09:06:17 [1050] Shutting down driver now 2015-02-06 09:06:17 [1050] Waiting for service thread to complete 2015-02-06 09:07:05 [1086] RC: IR Event /dev/input/event12 2015-02-06 09:07:05 [1095] RC: IR Event /dev/input/event12 2015-02-06 09:11:40 [1048] The device just got disconnected from the system 2015-02-06 09:11:40 [1048] Shutting down this device instance 2015-02-06 09:11:40 [1048] USB Transfer problem, shutting down driver instance (-1 - 19) 2015-02-06 09:11:40 [1048] Stopping Remote Control support 2015-02-06 09:11:40 [1911] RC: detached remote control 2015-02-06 09:11:40 [1048] clearing id: 0 -- Aha. USB problem. Unplugged device, plugged back in without reboot. mediasrv.log: all kinds of errors like: 2015-02-06 09:11:41 [1048] sending command failed with status (Unknown error -1) 2015-02-06 09:11:41 [1048] send vendor cmd failed with status --1 2015-02-06 09:11:41 [1048] sending command failed with status fffc (Unknown error -4) 2015-02-06 09:11:41 [1048] sending command failed with status fffe (Unknown error -2) 2015-02-06 09:11:41 [1048] sending command failed with status fffd (Unknown error -3) 2015-02-06 09:11:41 [1048] Tuner communcication error (573) 2015-02-06 09:11:41 [1048] Tuner response error (660) 2015-02-06 09:11:41 [1048] Tuner acknowledge message timed out (527) 2015-02-06 09:11:41 [1048] Tuner response error (660) 2015-02-06 09:11:41 [1048] xouton fail 2015-02-06 09:11:41 [1048] Error loading firmware for demodulator (400) 2015-02-06 09:11:41 [1048] Unable to start demod firmware (426) 2015-02-06 09:11:41 [1048] Unable to read demod chip rev 2015-02-06 09:11:41 [1048] Error reading response from
Re: Sundtek Media Pro III Europe switching off
On Fri, Feb 6, 2015 at 3:08 PM, steigerungs faktor steigerungsfak...@web.de wrote: Am 01.02.2015 um 14:26 schrieb Markus Rechberger: You'd need to show us some logfiles. echo loglevel=min /etc/sundtek.conf (and reboot) or /opt/bin/mediaclient --loglevel=min (this will turn on the logfile immediately). Is the tuner attached to a USB 3.0 port? What does tvheadend say? The tuner and drivers are 100% stable and proven with tvheadend, so in case tvheadend is blocked something else must be wrong. Best Regards, Markus On Sun, Feb 1, 2015 at 11:12 AM, steigerungs faktor steigerungsfak...@web.de wrote: Hi. Sry for the delay, testet quite a bit during nights. And switched from TVHeadend to VDR. Better used to. Obviously I have a USB problem, allthough not using 3.0 Will contact Fedora and Sundtek. Thanks for the trouble Gunter If interested, here is the story: Yesterday, after boot, Sundtek Media Pro was on. Driver loaded. TV possible, Rec possible. (By the way, not KODI but XBMC Gotham is running on this Fedora 20.) Hardware is Gigabyte GA-870A-USB3 Mainboard, Dualcore 3,4 GHz AMD. 4GB RAM, NVIDIA 9500. NVIDIA driver in use. SSD (reboot is nice). Setting Timer (1) worked with live TV running; at programmed time, vdr switched channel and recorded. Interesting: I had live TV on Eurosport, Timer on Tele 5, and could record Tele5 with Eurosport continuing to show football Probably same transponder, and the tuner can split the signals ??? Anyways, Eurosport kept going after Timer end. Tuner had no chance for pausing (?). Next Timer (2): Some time later, DasErste. Eurosport live ended, DasErste was recorded. Next timer(3) : DasErsteHD, immediately following Timer 2. Was recorded correctly; obviously again Tuner had no chance for pausing (?). Yet after rec, live TV was off. Next Timer (4): hours later. Rec startet, but no data recorded. This morning no chance of getting xbmc to show tv. No data from backend. Reboot, device plugged in. mediasrv.log: 2015-02-06 09:06:10 [1050] restarting logging 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] read status failure 1041 2015-02-06 09:06:10 [1050] The device just got disconnected from the system 2015-02-06 09:06:10 [1050] Shutting down this device instance 2015-02-06 09:06:10 [1050] USB Transfer problem, shutting down driver instance (-1 - 19) 2015-02-06 09:06:10 [1050] Stopping Remote Control support 2015-02-06 09:06:10 [1050] Enabling Standby 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] Tuner response error (660) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [1050] send vendor cmd failed with status --1 2015-02-06 09:06:10 [1050] send vendor cmd failed with status --1 2015-02-06 09:06:10 [1050] sending command failed with status (Unknown error -1) 2015-02-06 09:06:10 [4953] RC: detached remote control 2015-02-06 09:06:10 [1050] clearing id: 0 2015-02-06 09:06:17 [1050] Shutting down driver now 2015-02-06 09:06:17 [1050] Waiting for service thread to complete 2015-02-06 09:07:05 [1086] RC: IR Event /dev/input/event12 2015-02-06 09:07:05 [1095] RC: IR Event /dev/input/event12 2015-02-06 09:11:40 [1048] The device just got disconnected from the system 2015-02-06 09:11:40 [1048] Shutting down this device instance 2015-02-06 09:11:40 [1048] USB Transfer problem, shutting down driver instance (-1 - 19) 2015-02-06 09:11:40 [1048] Stopping Remote Control support 2015-02-06 09:11:40 [1911] RC: detached remote control 2015-02-06 09:11:40 [1048] clearing id: 0 -- Aha. USB problem. Unplugged device, plugged back in without reboot. mediasrv.log: all kinds of errors like: 2015-02-06 09:11:41 [1048] sending command failed with status (Unknown error -1) 2015-02-06 09:11:41 [1048] send vendor cmd failed with status --1 2015-02-06 09:11:41 [1048] sending command failed with status fffc (Unknown error -4) 2015-02-06 09:11:41 [1048] sending command failed with status fffe (Unknown error -2) 2015-02-06 09:11:41 [1048] sending command failed with status fffd (Unknown error -3) 2015-02-06 09:11:41 [1048] Tuner communcication error (573) 2015-02-06 09:11:41 [1048] Tuner response error (660) 2015-02-06 09:11:41 [1048] Tuner acknowledge message timed out (527) 2015-02-06 09:11:41 [1048] Tuner response error (660) 2015-02-06 09:11:41 [1048] xouton fail 2015-02-06 09:11:41 [1048] Error loading firmware for demodulator (400) 2015-02-06
Sundtek Media Pro III Europe switching off
Hi. New to the list, so maybe topic Sundtek Media Pro III has been treatet allready. If so, please just send archives. If not: Setup is the the above Stick, newest driver, Linux (Fedora 20), Kodi with TVHeadend. All fine when initially starting. Shows TV and records shows. Then Timer is set, and stick 'stops working'. I.e.: the timed show is not recorded. Instead Kodi tells me that connection to tvheadend is lost. To gain stick back, reboot is necessary. Any ideas? Gunter -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Sundtek Media Pro III Europe switching off
You'd need to show us some logfiles. echo loglevel=min /etc/sundtek.conf (and reboot) or /opt/bin/mediaclient --loglevel=min (this will turn on the logfile immediately). Is the tuner attached to a USB 3.0 port? What does tvheadend say? The tuner and drivers are 100% stable and proven with tvheadend, so in case tvheadend is blocked something else must be wrong. Best Regards, Markus On Sun, Feb 1, 2015 at 11:12 AM, steigerungs faktor steigerungsfak...@web.de wrote: Hi. New to the list, so maybe topic Sundtek Media Pro III has been treatet allready. If so, please just send archives. If not: Setup is the the above Stick, newest driver, Linux (Fedora 20), Kodi with TVHeadend. All fine when initially starting. Shows TV and records shows. Then Timer is set, and stick 'stops working'. I.e.: the timed show is not recorded. Instead Kodi tells me that connection to tvheadend is lost. To gain stick back, reboot is necessary. Any ideas? Gunter -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Sundtek Media Pro III Europe switching off
On 02/01/2015 11:12 AM, steigerungs faktor wrote: Hi. New to the list, so maybe topic Sundtek Media Pro III has been treatet allready. If so, please just send archives. If not: Setup is the the above Stick, newest driver, Linux (Fedora 20), Kodi with TVHeadend. All fine when initially starting. Shows TV and records shows. Then Timer is set, and stick 'stops working'. I.e.: the timed show is not recorded. Instead Kodi tells me that connection to tvheadend is lost. To gain stick back, reboot is necessary. Any ideas? Gunter Try asking for support in the Sundtek forums. http://support.sundtek.com/ MvH Benjamin Larsson -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
