cx22702_readreg errors

2009-10-23 Thread Andrew Congdon
I'm getting these errors: cx22702_writereg: error (reg == 0x0c, val == 0x40, ret == -6) cx22702_writereg: error (reg == 0x00, val == 0x01, ret == -6) cx22702_writereg: error (reg == 0x0d, val == 0x00, ret == -6) cx22702_writereg: error (reg == 0x0d, val == 0x01, ret == -6) cx22702_readreg:

Re: uvcvideo causes ehci_hcd to halt

2009-10-23 Thread Ozan Çağlayan
Alan Stern wrote On 22-10-2009 17:05: On Thu, 22 Oct 2009, [UTF-8] Ozan Çağlayan wrote: Here's the outputs from /sys/kernel/debug/usb/ehci: periodic: size = 1024 1: qh1024-0001/f6ffe280 (h2 ep2 [1/0] q0 p8) There's something odd about this. I'd like to

Re: [PATCH] output human readable form of the .status field from VIDIOC_ENUMINPUT

2009-10-23 Thread Sigmund Augdal
On Fri, Oct 23, 2009 at 12:10 AM, Hans Verkuil hverk...@xs4all.nl wrote: The attach patch modifies v4l2-ctl -I to also output signal status as detected by the driver/hardware. This info is available in the status field of the data returned by VIDIOC_ENUMINPUT which v4l2-ctl -I already calls.

A driver for TI WL1273 FM Radio

2009-10-23 Thread m7aalton
Hi. I have written a driver for the TI WL1273 FM Radio but it's not yet quite ready for up-streaming because of its interface. Now I've started to change the interface to v4l2 and I'm following Eduardo Valentin's Si4713 TX driver as an example. However, WL1273 radio has RX and TX so there are

[RFC] Video events, version 2.2

2009-10-23 Thread Sakari Ailus
Hi, Here's the version 2.2 of the video events RFC. It's based on Laurent Pinchart's original RFC and versions 2 and 2.1 which I wrote. The old RFC is available here: URL:http://www.spinics.net/lists/linux-media/msg11056.html Added Mauro to Cc. Changes to version 2.1

[PATCH] v4l: Cleanup redundant tests on unsigned

2009-10-23 Thread Roel Kluin
The variables are unsigned so the test `= 0' is always true, the ` 0' test always fails. In these cases the other part of the test catches wrapped values. Signed-off-by: Roel Kluin roel.kl...@gmail.com --- diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c

[PATCH] rounding signal strength indicator to nearest int

2009-10-23 Thread Sigmund Augdal
Attached patch changes v4l2-ctl -T so that the reported strength is rounded to nearest integer rather than allways rounding down. With this patch you get 100% when driver returns 0x. Best regards Sigmund Augdal v4l2-ctl-signal-strength-rounding.diff Description: Binary data

Re: Details about DVB frontend API

2009-10-23 Thread Jean Delvare
Hi Devin, On Thu, 22 Oct 2009 15:27:20 -0400, Devin Heitmueller wrote: On Thu, Oct 22, 2009 at 3:13 PM, Jean Delvare kh...@linux-fr.org wrote: Hi folks, I am looking for details regarding the DVB frontend API. I've read linux-dvb-api-1.0.0.pdf, it roughly explains what the FE_READ_BER,

Re: Details about DVB frontend API

2009-10-23 Thread Jean Delvare
On Fri, 23 Oct 2009 05:10:25 +0900, Mauro Carvalho Chehab wrote: Em Thu, 22 Oct 2009 21:13:30 +0200 Jean Delvare kh...@linux-fr.org escreveu: Hi folks, I am looking for details regarding the DVB frontend API. I've read linux-dvb-api-1.0.0.pdf, it roughly explains what the FE_READ_BER,

Re: [RFC] Video events, version 2.2

2009-10-23 Thread Ivan T. Ivanov
Hi Sakari, On Fri, 2009-10-23 at 13:18 +0300, Sakari Ailus wrote: Hi, Here's the version 2.2 of the video events RFC. It's based on Laurent Pinchart's original RFC and versions 2 and 2.1 which I wrote. The old RFC is available here:

Re: [PATCH] output human readable form of the .status field from VIDIOC_ENUMINPUT

2009-10-23 Thread Sigmund Augdal
On Fri, Oct 23, 2009 at 9:35 AM, Sigmund Augdal sigm...@snap.tv wrote: On Fri, Oct 23, 2009 at 12:10 AM, Hans Verkuil hverk...@xs4all.nl wrote: The attach patch modifies v4l2-ctl -I to also output signal status as detected by the driver/hardware. This info is available in the status field of

Re: [PATCH] output human readable form of the .status field from VIDIOC_ENUMINPUT

2009-10-23 Thread Sigmund Augdal
On Fri, Oct 23, 2009 at 9:35 AM, Sigmund Augdal sigm...@snap.tv wrote: On Fri, Oct 23, 2009 at 12:10 AM, Hans Verkuil hverk...@xs4all.nl wrote: The attach patch modifies v4l2-ctl -I to also output signal status as detected by the driver/hardware. This info is available in the status field of

[no subject]

2009-10-23 Thread Stephen Bainbridge
Hi, My Nebula DigiTV DVB-T (PCI) card no longer works. It's on a multi-boot Kubuntu system and works fine when I boot into Intrepid (v2.6.27-11-generic#1 SMP i686), but it does not work with Jaunty (2.6.28-11-generic i686). I've also tried a beta of the latest Kubuntu release Karmic and that also

Re: [PATCH] v4l: Cleanup redundant tests on unsigned

2009-10-23 Thread Roel Kluin
Op 23-10-09 12:59, Roel Kluin schreef: The variables are unsigned so the test `= 0' is always true, the ` 0' test always fails. In these cases the other part of the test catches wrapped values. Signed-off-by: Roel Kluin roel.kl...@gmail.com --- I forgot the stats:

[RFC] Restructure video_device

2009-10-23 Thread Laurent Pinchart
Hi everybody, while working on device node support for subdevs I ran into an issue with the way v4l2 objects are structured. We currently have the following structure: - video_device represents a device that complies with the V4L1 or V4L2 API. Every video_device has a corresponding device

Re: cpu load of webcam read out with omap3/beagleboard

2009-10-23 Thread rath
Nobody has an idea? I think this cpu load isn't normal, becuase everywhere you can read, that the bealgeboard is very fast and it has 500MHz... Regards, Joern - Original Message - From: Rath maili...@hardware-datenbank.de To: Linux-Media linux-media@vger.kernel.org Sent: Sunday,

Pinnacle PCTV DVB-T support.

2009-10-23 Thread mark
Hi! I found my old Pinnacle PCTV DVB-T card and thought I might put it to use. Since I have used it on linux before (about two years ago) with the em28xx driver I didn't think it would be any problems. However I can't seem to get it to work. I'm using Ubuntu Karmic and a uname -a yields: Linux

Re: Pinnacle PCTV DVB-T support.

2009-10-23 Thread Devin Heitmueller
On Fri, Oct 23, 2009 at 10:12 AM, m...@spanberg.se wrote: Hi! I found my old Pinnacle PCTV DVB-T card and thought I might put it to use. Since I have used it on linux before (about two years ago) with the em28xx driver I didn't think it would be any problems. However I can't seem to get it

Re: Details about DVB frontend API

2009-10-23 Thread Jean Delvare
On Thu, 22 Oct 2009 21:13:30 +0200, Jean Delvare wrote: For example, the signal strength. All I know so far is that this is a 16-bit value. But then what? Do greater values represent stronger signal or weaker signal? Are 0x and 0x special values? Is the returned value meaningful even

pinnacle pctv 7010ix and saa716x

2009-10-23 Thread Benjamin Valentin
Hello, I have a Pinnacle pctv 7010ix that is oddly recognized as a Pinnacle PCTV 3010iX [1]. I found that the SAA7162 chip used in that device is supported while the device itself is not. I was a bit confused wich of the various repositories I encountered reflects the latest version of

Re: pinnacle pctv 7010ix and saa716x

2009-10-23 Thread Devin Heitmueller
On Fri, Oct 23, 2009 at 11:45 AM, Benjamin Valentin benpi...@zedat.fu-berlin.de wrote: Hello, I have a Pinnacle pctv 7010ix that is oddly recognized as a Pinnacle PCTV 3010iX [1]. I found that the SAA7162 chip used in that device is supported while the device itself is not. I was a bit

Re: Details about DVB frontend API

2009-10-23 Thread Michael Krufky
On Fri, Oct 23, 2009 at 11:47 AM, Jean Delvare kh...@linux-fr.org wrote: On Thu, 22 Oct 2009 21:13:30 +0200, Jean Delvare wrote: For example, the signal strength. All I know so far is that this is a 16-bit value. But then what? Do greater values represent stronger signal or weaker signal? Are

Re: [PATCH 2/6 v5] Support for TVP7002 in dm365 board

2009-10-23 Thread Santiago Nunez-Corrales
Kevin Hilman wrote: santiago.nu...@ridgerun.com writes: From: Santiago Nunez-Corrales santiago.nu...@ridgerun.com This patch provides support for TVP7002 in architecture definitions within DM365. Signed-off-by: Santiago Nunez-Corrales santiago.nu...@ridgerun.com ---

[cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS

2009-10-23 Thread Hans Verkuil
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below. Results of the daily build of v4l-dvb: date:Fri Oct 23 19:00:04 CEST 2009 path:http://www.linuxtv.org/hg/v4l-dvb changeset: 13156:f6680fa8e7ec gcc version: gcc

TV card working with kernel 2.6.28 not working with kernel 2.6.31

2009-10-23 Thread Norman Jonas
I am an Ubuntu user. Since I switched to the new Karmic release with the new kernel my TV card stopped working. Even explicitly setting the tuner doesnt seem to work. Setting the options explicitly with saa7134 i2c_scan=1 card=49 tuner=5 and tuner no_autodetect=5 addr=0xc6 / 0x63 and any

Re: Details about DVB frontend API

2009-10-23 Thread VDR User
On Thu, Oct 22, 2009 at 1:29 PM, Manu Abraham abraham.m...@gmail.com wrote: Sometime back, (some time in April) i proposed a patch which addressed the issue to scale even those devices which have a weird scale or none. Though based on an older tree of mine, here is the patch again. If it looks

RE: [PATCH] V4L: adding digital video timings APIs

2009-10-23 Thread Karicheri, Muralidharan
Hans, following IOCTLS :- - verify the new v4l2_input capabilities flag added - Enumerate available presets using VIDIOC_ENUM_DV_PRESETS - Set one of the supported preset using VIDIOC_S_DV_PRESET - Get current preset using VIDIOC_G_DV_PRESET - Detect current preset using

Re: uvcvideo causes ehci_hcd to halt

2009-10-23 Thread Alan Stern
On Fri, 23 Oct 2009, [UTF-8] Ozan Çağlayan wrote: There's something odd about this. I'd like to see this file again, after the patch below has been applied. periodic size = 1024 1: qh1024-0001/f6ffe280 (h2 ep2 [1/0] q0 p8) t On closer study and more careful thought,

Re: Details about DVB frontend API

2009-10-23 Thread Markus Rechberger
On Fri, Oct 23, 2009 at 9:02 PM, VDR User user@gmail.com wrote: On Thu, Oct 22, 2009 at 1:29 PM, Manu Abraham abraham.m...@gmail.com wrote: Sometime back, (some time in April) i proposed a patch which addressed the issue to scale even those devices which have a weird scale or none. Though

Re: [PATCH 5/6] mx31moboard: camera support

2009-10-23 Thread Guennadi Liakhovetski
On Wed, 21 Oct 2009, Valentin Longchamp wrote: Sascha Hauer wrote: On Mon, Oct 19, 2009 at 06:41:13PM +0200, Valentin Longchamp wrote: Hi Guennadi, Guennadi Liakhovetski wrote: Hi On Thu, 15 Oct 2009, Valentin Longchamp wrote: We have two mt9t031 cameras that