[PATCH] sh_mobile_ceu_camera: Add physical address alignment checks V2

2009-12-11 Thread Magnus Damm
From: Magnus Damm d...@opensource.se Make sure physical addresses are 32-bit aligned in the SuperH Mobile CEU driver V2. The lowest two bits of the frame address registers are fixed to zero so frame buffers have to be 32-bit aligned. The V4L2 mmap() case is using dma_alloc_coherent() for this

[PULL] http://linuxtv.org/hg/~jfrancois/v4l-dvb/

2009-12-11 Thread Jean-Francois Moine
Hi Mauro, Please pull from http://linuxtv.org/hg/~jfrancois/v4l-dvb for the following 2 changesets: 01/02: gspca - some subdrivers: Make device_table[]s constant. http://linuxtv.org/hg/~jfrancois/v4l-dvb?cmd=changeset;node=0ba73f8e8517 02/02: gspca - ov534: Fix a compilation warning.

Re: [linux-dvb] Hauppauge PVR-150 Vertical sync issue?

2009-12-11 Thread Andy Walls
On Thu, 2009-12-10 at 11:56 -0500, Robert Longfield wrote: Ok I've been able to do some troubleshooting with some interesting results. I removed the one splitter being used, connected to the main cable coming into the house, isolated the grounds with no change in sync issues. I pulled the

Re: [PATCH] uvcvideo: add another YUYV format GUID

2009-12-11 Thread Daniel Ritz
On 11.12.2009 02:21, Laurent Pinchart wrote: On Thursday 10 December 2009 17:34:25 Daniel Ritz wrote: On Thu, 2009-12-10 at 02:46 +0100, Laurent Pinchart wrote: Hi Daniel, On Friday 04 December 2009 03:05:37 Daniel Ritz wrote: Hi Laurent On Thu, 2009-12-03 at 21:15 +0100, Laurent Pinchart

[PULL] http://kernellabs.com/hg/~mkrufky/build-fix

2009-12-11 Thread Michael Krufky
Mauro, Backwards compat got broken a few weeks ago... Please pull for the fix. Please pull from: http://kernellabs.com/hg/~mkrufky/build-fix for: - saa7134: fix build against older kernels saa7134-input.c |2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Cheers, Mike -- To

Re: TveiiS470 and DVBWorld2005 not working

2009-12-11 Thread Guillem Solà
Guillem Solà wrote: Hi, I come to this list as my last resort. I have two DVB-S PCIE cards and no one can get channels, but I have another computer with a PCI SAA7146 that can get 1400 services from same dish. * Tveii S470 * One is the Tveii S470. I guess that the S470 should work because

dib0700: Nova-T-500 remote - mixed button codes

2009-12-11 Thread Antonio Marcos López Alonso
Hi all, I own a Hauppauge Nova-T-500 in a box running Mythbuntu 9.10. The card runs fine except when it comes to the in-built remote sensor: Whenever I press any button, the remote sensor seems to receive some other keycodes aside the proper one (i.e. when I press Volume Up button the sensor

New ASUS P3-100 DVB-T/DVB-S device (1043:48cd)

2009-12-11 Thread dvblinux
Hi all, I'm new on this list. I modified on my own the SAA driver to manage an ASUS PS3-100 combo card not supported yet in current version. It features two DVB-S and DVB-T receivers packed on the same PCI card. The DVB-T part is identical to ASUS P7131 Hybrid and therefore is managed thru the

dib0700: Nova-T-500 remote - mixed button codes

2009-12-11 Thread Antonio Marcos López Alonso
Hi all, I own a Hauppauge Nova-T-500 in a box running Mythbuntu 9.10. The card runs fine except when it comes to the in-built remote sensor: Whenever I press any button, the remote sensor seems to receive some other keycodes aside the proper one (i.e. when I press Volume Up button the sensor

RE: dib0700: Nova-T-500 remote - mixed button codes

2009-12-11 Thread Rochet, Christophe
Hi Antonio. Did you switched also the IR remote sensor itself ? I experienced same weird things with a WinovaTV years ago, and finally the IR phototransistor in the small round receiver was crappy. When I changed it by a common spare it all came right. Protect also your IR sensor from AC

[PATCH] V4L/DVB: lgs8gxx: Use shifts rather than multiply/divide when possible

2009-12-11 Thread David Howells
If val is a u64, then following: val *= (u64)1 32; val /= (u64)1 32; should surely be better represented as: val = 32; val = 32; Especially as, for the division, the compiler might want to actually do a division: drivers/built-in.o: In function

Re: TveiiS470 and DVBWorld2005 not working

2009-12-11 Thread Guillem Solà
Guillem Aranda wrote: Sorry for the noise, The sooner I wrote the email, the sooner my TeviiS470 started to work! I did it work with the latest s2-liplianin tip, of course firmwares were in /lib/firmware dir. Now I'm doing some compatibility tests. As I said I can get a few less channels

Re: soc_camera: OV2640

2009-12-11 Thread Alan Carvalho de Assis
Hi Guennadi, On 12/8/09, Alan Carvalho de Assis acas...@gmail.com wrote: Hi Guennadi, ... I am trying to use an OV2640 camera with soc_camera. I'm using ov772x driver as base, but it needs too much modification to work with ov2640. I don't know that sensor specifically, but they can be

[PULL] soc-camera and mediabus

2009-12-11 Thread Guennadi Liakhovetski
Hi Mauro, At last soc-camera and mediabus lot for 2.6.33. Note, that one of this patches adds new fourcc codes. A patch for their documentation will be submitted immediately. Please pull from http://linuxtv.org/hg/~gliakhovetski/v4l-dvb for the following 30 changesets: 01/30: tw9910: The

[PATCH] document new pixel formats

2009-12-11 Thread Guennadi Liakhovetski
Document all four 10-bit Bayer formats, 10-bit monochrome and a missing 8-bit Bayer formats. Signed-off-by: Guennadi Liakhovetski g.liakhovet...@gmx.de --- Notice, this is a linux git patch, so, it includes manual additions to media-entities.tmpl, which will hopefully not be needed for hg. I'm

Re: soc_camera: OV2640

2009-12-11 Thread Guennadi Liakhovetski
On Fri, 11 Dec 2009, Alan Carvalho de Assis wrote: Hi Guennadi, On 12/8/09, Alan Carvalho de Assis acas...@gmail.com wrote: Hi Guennadi, ... I am trying to use an OV2640 camera with soc_camera. I'm using ov772x driver as base, but it needs too much modification to work with ov2640.

Re: linux-next: Tree for December 11 (media/dvb/frontends)

2009-12-11 Thread Randy Dunlap
On Fri, 11 Dec 2009 16:01:51 +1100 Stephen Rothwell wrote: Hi all, My usual call for calm: please do not put stuff destined for 2.6.34 into linux-next trees until after 2.6.33-rc1. Changes since 20091210: drivers/media/dvb/frontends/dib0090.h:103: error: expected '=', ',', ';', 'asm'

Re: soc_camera: OV2640

2009-12-11 Thread Alan Carvalho de Assis
Hi Guennadi, On 12/11/09, Guennadi Liakhovetski g.liakhovet...@gmx.de wrote: On Fri, 11 Dec 2009, Alan Carvalho de Assis wrote: I got mx27_camera from pengutronix tree and modified it to work with kernel 2.6.32 (few modifications). Sorry, I cannot help you with an out-of-tree driver, and

Re: [PATCH - v1 1/2] V4L - vpfe capture - make clocks configurable

2009-12-11 Thread Kevin Hilman
Karicheri, Muralidharan m-kariche...@ti.com writes: Kevin, I think I have figured it out... First issue was that I was adding my entry at the end of dm644x_clks[] array. I need to add it before the CLK(NULL, NULL, NULL) secondly, your suggestion didn't work as is. This is what I had to

[cron job] v4l-dvb daily build 2.6.22 and up: ERRORS, 2.6.16-2.6.21: ERRORS

2009-12-11 Thread Hans Verkuil
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below. Results of the daily build of v4l-dvb: date:Fri Dec 11 19:00:05 CET 2009 path:http://www.linuxtv.org/hg/v4l-dvb changeset: 13611:db37ff59927f gcc version: gcc

[SOLVED] dib0700: Nova-T-500 remote - mixed button codes

2009-12-11 Thread Antonio Marcos López Alonso
Spot on, Christophe! I didn't realize I have not tried swapping the sensor wires and this little damned thing is working now! However I must point the faulty sensor wire works right with the HVR-1100. I cannot tell which sensor belongs to which card (both of them are identical except the

Re: [stable] [PATCH] ov511: fix probe() hang due to double mutex_lock

2009-12-11 Thread Brandon Philips
On 19:32 Thu 10 Dec 2009, Greg KH wrote: On Thu, Dec 10, 2009 at 05:04:49PM -0800, Brandon Philips wrote: Commit 163fe744c3283fd267268629afff4cfc846ed0e0 added a double mutex_lock which hangs ov51x_probe(). This was clearly a typo. Change final mutex_lock() - mutex_unlock()

RE: [PATCH - v1 1/2] V4L - vpfe capture - make clocks configurable

2009-12-11 Thread Karicheri, Muralidharan
Kevin, That is what I had seen. I will check it again on Monday and let you know. Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 phone: 301-407-9583 email: m-kariche...@ti.com -Original Message- From: Kevin Hilman

Re: Latest stack that can be merged on top of linux-next tree

2009-12-11 Thread HoP
Hi 2009/12/11 Karicheri, Muralidharan m-kariche...@ti.com: Hi, Thanks for the response. One more question that I have is if the devices on the two buses can use the same i2c address. That is the case for my board. So wondering if this works as well. That is IMHO exactly reason of

[PATCH] dib8000: make some constant static

2009-12-11 Thread Németh Márton
From: Márton Németh nm...@freemail.hu Eliminate the following sparse warnings (see make C=1): * dib8000.c:125:15: warning: symbol 'coeff_2k_sb_1seg_dqpsk' was not declared. Should it be static? * dib8000.c:130:15: warning: symbol 'coeff_2k_sb_1seg' was not declared. Should it be static? *

[PATCH] sanio-ms: clean up init, exit and id_table

2009-12-11 Thread Németh Márton
From: Márton Németh nm...@freemail.hu Make module_init static and mark it with __init. Make module_exit static and mark it with __exit. Mark probe functions with __devinit. Make id table static and mark with __devinitconst. This will eliminate the following sparse warnings (see make C=1): *

Re: IR Receiver on an Tevii S470

2009-12-11 Thread Igor M. Liplianin
On 11 декабря 2009, Igor M. Liplianin liplia...@me.by wrote: On Thu, 2009-12-10 at 18:16 +0200, Igor M. Liplianin wrote: On 10 декабря 2009 03:12:39 Andy Walls wrote: On Wed, 2009-12-09 at 17:54 +0200, Igor M. Liplianin wrote: Igor and Matthias, Please try the changes

Re: IR Receiver on an Tevii S470

2009-12-11 Thread Andy Walls
On Sat, 2009-12-12 at 02:30 +0200, Igor M. Liplianin wrote: On 11 декабря 2009, Igor M. Liplianin liplia...@me.by wrote: On Thu, 2009-12-10 at 18:16 +0200, Igor M. Liplianin wrote: On 10 декабря 2009 03:12:39 Andy Walls wrote: On Wed, 2009-12-09 at 17:54 +0200, Igor M. Liplianin wrote:

Re: IR Receiver on an Tevii S470

2009-12-11 Thread Igor M. Liplianin
On 12 декабря 2009 03:00:37 Andy Walls wrote: On Sat, 2009-12-12 at 02:30 +0200, Igor M. Liplianin wrote: On 11 декабря 2009, Igor M. Liplianin liplia...@me.by wrote: On Thu, 2009-12-10 at 18:16 +0200, Igor M. Liplianin wrote: On 10 декабря 2009 03:12:39 Andy Walls wrote: On Wed,

Re: IR Receiver on an Tevii S470

2009-12-11 Thread Andy Walls
On Sat, 2009-12-12 at 03:42 +0200, Igor M. Liplianin wrote: On 12 декабря 2009 03:00:37 Andy Walls wrote: On Sat, 2009-12-12 at 02:30 +0200, Igor M. Liplianin wrote: On 11 декабря 2009, Igor M. Liplianin liplia...@me.by wrote: On Thu, 2009-12-10 at 18:16 +0200, Igor M. Liplianin wrote: