Hi!
Do you mean the dmesg output ?
A full dmesg is included in this address :
http://pastebin.com/8XU619Uk
Not in all suspend/hibernate the problem comes, only in some of them
and this included dmesg output is just after a non working case of
webcam fault.
I also have
The probe method used by i2c_new_probed_device() may not be suitable
for all cases. Let the caller provide its own, optional probe
function.
Signed-off-by: Jean Delvare kh...@linux-fr.org
---
Documentation/i2c/instantiating-devices |2
drivers/i2c/i2c-core.c| 65
Now that i2c-core offers the possibility to provide custom probing
function for I2C devices, let's make use of it.
Signed-off-by: Jean Delvare kh...@linux-fr.org
---
I wasn't too sure where to put the custom probe function: in each driver,
in the ir-common module or in the v4l2-common module. I
Hi all,
The support in drivers for the V4L2 control API is currently very chaotic.
Few if any drivers support the API correctly. Especially the support for the
new extended controls is very much hit and miss.
Combine that with the requirements for the upcoming embedded devices that
will want to
After Mediaset, another broadcaster in Italy uses DVB-S2 Multistream,
this time on Atlantic Bird 1 (12.5°W), frequency 12718H.
More info:
http://www.newtec.eu/uploads/media/NEWTEC_press_release_Multistream_Telecom-Italia-Media-Broadcasting_TIMB___2010-03-15_01.pdf
Andy Walls wrote:
On Sat, 2010-04-03 at 19:56 -0300, Mauro Carvalho Chehab wrote:
Andy Walls wrote:
On Fri, 2010-04-02 at 22:32 -0300, Mauro Carvalho Chehab wrote:
Andy Walls wrote:
I haven't taken a very hard look at this since I'm very busy this month.
It looks OK so far.
Thank you
Hi,
I have a 2.6.29 kernel for my embedded ARM system. I need an newer gspca
driver, so I downloaded the gspca driver from
http://linuxtv.org/hg/~hgoede/gspca/ an copied the content of the linux
folder to my 2.6.29 source tree and tried to cross compile it. But I get the
error
Hi!
If unload/reload of uvcvideo helps, it is most likely problem in that.
If unload/reload of ehci_hcd is needed, it is most likely ehci problem.
My testing shows that:
1. If I remove uvcvideo BEFORE suspend and reinsert it after resume,
it works. However, I cannot always
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Sun Apr 4 19:00:12 CEST 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 14536:a539e5b68945
git master:
2010/3/9 Igor M. Liplianin liplia...@me.by:
MartinG, I'm already planning to replace mantis related part with linuxtv one,
so please use http://linuxtv.org/hg/v4l-dvb.
But not get wrong, this tree isn't panacea, your reports are welcome.
Thanks, I've pulled the linuxtv tree, and it compiled,
On Mon, Apr 5, 2010 at 1:55 AM, MartinG grons...@gmail.com wrote:
Thanks, I've pulled the linuxtv tree, and it compiled, installed and
seems to work just fine. No more mantis_ack_wait (0): Slave RACK Fail
! I hope ;).
That error is from the older version of my driver. You don't find that
On Sun, 2010-04-04 at 15:00 -0300, Mauro Carvalho Chehab wrote:
Andy Walls wrote:
And when you have time:
A way to generate random IR
glitches is with bright sunlight reflecting off of a basin of water
that's surface is being disturbed to make waves.
I have a better way: just let
Finally got back to my mythtv and found that the card isn't working 100%
what I've noticed.
1) Installed card run a LSMOD (shown below) did a scandvb -a 0
/usr/share/dvb-apps/dvb-t/au-Bendigo and scandvb -a 1
/usr/share/dvb-apps/dvb-t/au-Bendigo. The cards found all the channels and
works.
On Sun, 2010-04-04 at 16:14 +0200, Jean Delvare wrote:
Now that i2c-core offers the possibility to provide custom probing
function for I2C devices, let's make use of it.
Signed-off-by: Jean Delvare kh...@linux-fr.org
---
I wasn't too sure where to put the custom probe function: in each
On Sun, 2010-04-04 at 17:41 +0200, Hans Verkuil wrote:
Hi all,
The support in drivers for the V4L2 control API is currently very chaotic.
Few if any drivers support the API correctly. Especially the support for the
new extended controls is very much hit and miss.
Combine that with the
In file included from drivers/media/dvb/dvb-usb/dib0700_devices.c:14:
drivers/media/dvb/frontends/dib8000.h: In function 'dib8000_get_adc_power':
drivers/media/dvb/frontends/dib8000.h:112: warning: no return statement in
function returning non-void
Fixed by adding a return to the dummy
16 matches
Mail list logo